On the Dwell-Fatigue Crack Propagation Behavior of a High-Strength Ni-Base Superalloy Manufactured by Selective Laser Melting
Source abstract
Abstract
Abstract This study focuses on the dwell-fatigue crack propagation behavior of IN718 manufactured via selective laser melting (SLM). The dwell-fatigue test condition is 823 K (550 $$\circ $$C) with a long 2160-s dwell-holding period. Effects of heat treatment and loading direction on dwell-fatigue crack propagation rates are studied. A grain boundary $$\delta $$ precipitate seems to be slightly beneficial to the dwell-fatigue cracking resistance of SLM IN718. A comparison has been made between SLM IN718 and forged counterparts at different temperatures, indicating that a creep damage mechanism is likely dominant for SLM IN718 under the present test condition. A general discussion of the inferior creep resistance of SLM IN718 is also included. The anisotropic dwell-fatigue cracking resistance has also been studied and rationalized with the effective stress intensity factor calculated from finite element modeling.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Temperature Alloys and Creep · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Gasser, A., G. Backes, I. Kelbassa, A. Weisheit, and K. Wissenbach: Laser Tech. J., 2010, vol. 7, pp. 58–63.10.1002/latj.201090029 ↗
2. Chlebus, E., K. Gruber, B. Kuźnicka, J. Kurzac, and T. Kurzynowski: Mater. Sci. Eng. A, 2015, vol. 639, pp. 647–55.10.1016/j.msea.2015.05.035 ↗
3. Deng, D., R.L. Peng, H. Brodin, and J. Moverare: Mater. Sci. Eng. A, 2018, vol. 713, pp. 294–306.10.1016/j.msea.2017.12.043 ↗
4. Trosch, T., J. Strößner, R. Völkl, and U. Glatzel: Mater. Lett., 2016, vol. 164, pp. 428–31.10.1016/j.matlet.2015.10.136 ↗
5. Rickenbacher, L., T. Etter, S. Hövel, and K. Wegener: Rapid Prototyp. J., 2013, vol. 19, pp. 282–90.10.1108/13552541311323281 ↗
6. Xu, J., H. Gruber, D. Deng, R.L. Peng, and J.J. Moverare: Acta Mater., 2019, vol. 179, pp. 142–57.10.1016/j.actamat.2019.08.034 ↗
7. Montero-Sistiaga, M.L., S. Pourbabak, J. Van Humbeeck, D. Schryvers, and K. Vanmeensel: Mater. Des., 2019, vol. 165, p. 107598.10.1016/j.matdes.2019.107598 ↗
8. Tomus, D., Y. Tian, P.A. Rometsch, M. Heilmaier, and X. Wu: Mater. Sci. Eng. A, 2016, vol. 667, pp. 42–53.10.1016/j.msea.2016.04.086 ↗
9. Tomus, D., P.A. Rometsch, M. Heilmaier, and X. Wu: Addit. Manuf., 2017, vol. 16, pp. 65–72.
10. Carter, L.N., C. Martin, P.J. Withers, and M.M. Attallah: J. Alloys Compd., 2014, vol. 615, pp. 338–47.10.1016/j.jallcom.2014.06.172 ↗
11. Messé, O., R. Muñoz-Moreno, T. Illston, S. Baker, and H. Stone: Addit. Manuf., 2018, vol. 22, pp. 394–404.
12. Wang, X., L.N. Carter, B. Pang, M.M. Attallah, and M.H. Loretto: Acta Mater., 2017, vol. 128, pp. 87–95.10.1016/j.actamat.2017.02.007 ↗
13. Koutiri, I., E. Pessard, P. Peyre, O. Amlou, and T. De Terris: J. Mater. Process. Technol., 2018, vol. 255, pp. 536–46.10.1016/j.jmatprotec.2017.12.043 ↗
14. Leary, M., M. Mazur, H. Williams, E. Yang, A. Alghamdi, B. Lozanovski, X. Zhang, D. Shidid, L. Farahbod-Sternahl, G. Witt, et al.: Mater. Des., 2018, vol. 157, pp. 179–99.10.1016/j.matdes.2018.06.010 ↗
15. Li, H., J. Sun, M. Hardy, H. Evans, S. Williams, T. Doel, and P. Bowen: Acta Mater., 2015, vol. 90, pp. 355–69.10.1016/j.actamat.2015.02.023 ↗
16. Andersson, H., C. Persson, and T. Hansson: Int. J. Fatigue, 2001, vol. 23, pp. 817–27.10.1016/S0142-1123(01)00031-7 ↗
17. Antunes, F., J. Ferreira, and C. Branco: Mater. High Temp., 2000, vol. 17, pp. 439–48.10.1179/mht.2000.058 ↗
18. Bache, M., W. Evans, and M. Hardy: Int. J. Fatigue, 1999, vol. 21, pp. S69–77.10.1016/S0142-1123(99)00057-2 ↗
19. Gustafsson, D. and E. Lundström: Int. J. Fatigue, 2013, vol. 48, pp. 178–86.10.1016/j.ijfatigue.2012.10.018 ↗
20. Gustafsson, D., J. Moverare, S. Johansson, K. Simonsson, M. Hörnqvist, T. Månsson, and S. Sjöström: Int. J. Fatigue, 2011, vol. 33, pp. 1461–69.10.1016/j.ijfatigue.2011.05.011 ↗
21. Gustafsson, D., E. Lundström, and K. Simonsson: Int. J. Fatigue, 2013, vol. 52, pp. 124–30.10.1016/j.ijfatigue.2013.03.004 ↗
22. Osinkolu, G., G. Onofrio, and M. Marchionni: Mater. Sci. Eng. A, 2003, vol. 356, pp. 425–33.10.1016/S0921-5093(03)00156-4 ↗
23. Pedron, J.P. and A. Pineau: Mater. Sci. Eng., 1982, vol. 56, pp. 143–56.10.1016/0025-5416(82)90167-7 ↗
24. Saarimäki, J., J. Moverare, R. Eriksson, and S. Johansson: Mater. Sci. Eng. A, 2014, vol. 612, pp. 398–405.10.1016/j.msea.2014.06.068 ↗
25. Saarimäki, J., M.H. Colliander, and J.J. Moverare: Mater. Sci. Eng. A, 2017, vol. 692, pp. 174–81.10.1016/j.msea.2017.03.063 ↗
26. Krupp, U. and C. McMahon Jr.: J. Alloys Compd., 2004, vol. 378, pp. 79–84.10.1016/j.jallcom.2003.10.074 ↗
27. Bricknell, R. and D. Woodford: Metall. Trans. A, 1981, vol. 12, pp. 1673–80.10.1007/BF02643573 ↗
28. Sadananda, K. and P. Shahinian: Metall. Trans. A, 1977, vol. 8, pp. 439–49.10.1007/BF02661754 ↗
29. Johnson, H.: Mater. Res. Stand., 1965, vol. 5, pp. 442–45.
30. Xu, S., X.J. Wu, A. Koul, and J. Dickson: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1039–45.10.1007/s11661-999-0156-z ↗
31. Gustafsson, D., J. Moverare, S. Johansson, M. Hörnqvist, K. Simonsson, S. Sjöström, and B. Sharifimajda: Procedia Eng., 2010, vol. 2, pp. 1095–1104.10.1016/j.proeng.2010.03.118 ↗
32. Hayes, R.: Superalloys 718, 625 and Various Derivatives, TMS, 1991, pp. 549–62.
33. Pröbstle, M., S. Neumeier, J. Hopfenmüller, L. Freund, T. Niendorf, D. Schwarze, and M. Göken: Mater. Sci. Eng. A, 2016, vol. 674, pp. 299–307.10.1016/j.msea.2016.07.061 ↗
34. Kuo, Y.L., A. Kamigaichi, and K. Kakehi: Metall. Mater. Trans. A, 2018a, vol. 49A, pp. 3831–37.10.1007/s11661-018-4769-y ↗
35. Kuo, Y.L., T. Nagahari, and K. Kakehi: Materials, 2018b, vol. 11, p. 996.10.3390/ma11060996 ↗
36. Hayes, R.: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2596–2606.10.1007/s11661-008-9564-8 ↗
37. Miller, C.F., G.W. Simmons, and R.P. Wei: Scripta Mater., 2000, vol. 42, pp. 227–32.10.1016/S1359-6462(99)00336-X ↗
38. Boehlert, C., D. Dickmann, and N.N. Eisinger: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 27–40.10.1007/s11661-006-0149-0 ↗
39. M. Chaturvedi and Y. Han: https://doi.org/10.7449/1989/Superalloys_1989_489_498, 1989.10.7449/1989/Superalloys_1989_489_498 ↗
40. Chen, W. and M. Chaturvedi: Acta mater., 1997, vol. 45, pp. 2735–46.10.1016/S1359-6454(96)00399-0 ↗
41. Han, Y. and M. Chaturvedi: Mater. Sci. Eng., 1987, vol. 89, pp. 25–33.10.1016/0025-5416(87)90246-1 ↗
42. Kuo, Y.L., S. Horikawa, and K. Kakehi: Scripta Mater., 2017, vol. 129, pp. 74–78.10.1016/j.scriptamat.2016.10.035 ↗
43. Chen, W. and M. Chaturvedi: Mater. Sci. Eng. A, 1994, vol. 183, pp. 81–89.10.1016/0921-5093(94)90892-3 ↗
44. Hyde, T., A. Becker, Y. Song, and W. Sun: Comput. Mater. Sci., 2006, vol. 35, pp. 35–41.10.1016/j.commatsci.2005.02.013 ↗
45. Radhakrishna, C. and K.P. Rao: Mater. High Temp., 1994, vol. 12, pp. 323–27.10.1080/09603409.1994.11752536 ↗
46. Reddy, G.M., C. Murthy, N. Viswanathan, and K.P. Rao: Sci. Technol. Weld. Join., 2007, vol. 12, pp. 106–14.10.1179/174329307X159838 ↗