Softening Effects Induced by Shot Peening for an Aluminum-Lithium Alloy
Source abstract
Abstract
The effects of shot peening on the mechanical properties of a 2060 Al-Li alloy were investigated through tensile tests and microhardness tests on longitudinal sections of the specimens. Moreover, the microstructural evolution of the rolled (non-shot-peened) and shot-peened specimens was analyzed. Experimental results indicated that the phenomenon of work softening occurred due to shot peening. Therefore, the tensile strength, yield strength, and microhardness decreased, while the total elongation increased. Furthermore, microstructural analysis showed that softening effects were primarily ascribable to the partial dynamic recrystallization and textural transition from β to α fiber textures. These resulted from simultaneous influences of heat effect and plastic deformation during the shot peening process. Consequently, the dislocation density decreased while the weighted average of the Schmid factor increased, making the deformation easier and the material softened. As a result, the 2060 Al-Li alloy was softened by the relatively high-intensity shot peening, and an empirical equation was proposed to embody the comprehensive effects of the grain size and orientation on the mechanical properties of Al-Li alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Metal Alloys Wear and Properties · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. R. Zhu, Q. Liu, J.F. Li, S. Xiang, Y.L. Chen and X.H. Zhang: J. Alloy Compd., 2015, vol. 650, pp. 75-85.10.1016/j.jallcom.2015.07.182 ↗
2. N.E. Prasad, A. Gokhale and R.J.H. Wanhill: Aluminum-Lithium Alloys: Processing, Properties and Applications, 1st ed., Elsevier, New York, NY, 2013, pp. 3-18.
3. J. Yuan, J. Pang, G. Xie, Y. Wang and L. Han: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 1509-21. 10.1007/s11661-018-05106-810.1007/s11661-018-05106-8 ↗
4. R. Raghavan, R. Ayer, H.W. Jin, C.N. Marzinsky and U. Ramamurty: Scripta Mater., 2008, Vol. 59 (2), pp. 167-170.10.1016/j.scriptamat.2008.03.009 ↗
5. X.D. Zhang, N. Hansen, Y.K. Gao and X.X. Huang: Acta Mater., 2012, vol. 60 (16), pp. 5933-43.10.1016/j.actamat.2012.07.037 ↗
6. D.Y. Hu, Y. Gao, F.C. Meng, J. Song and R.Q. Wang: Metall. Mater. Trans. A, 2018, vol. 49 (4), pp. 1397-1409. 10.1007/s11661-018-4493-7.10.1007/s11661-018-4493-7 ↗
7. B.Y. He, K.A. Soady, B.G. Mellor, A. Morris and P.A.S. Reed: Mater. Sci. Tech.-Lond., 2013, vol. 29 (7), pp. 788-96.10.1179/1743284713Y.0000000230 ↗
8. Y.K. Gao and X.R. Wu: Acta Mater., 2011, vol. 59 (9), pp. 3737-47.10.1016/j.actamat.2011.03.013 ↗
9. Y.K. Gao: Mater. Sci. Eng. A Struct., 2011, vol. 528(10–11), pp. 3823–28.10.1016/j.msea.2011.01.077 ↗
10. W. Cheng, L. Wang, X. Wang and Y. Xu: Int. J. Mech. Sci., 2018, vol. 146-147, pp. 280-94. 10.1016/j.ijmecsci.2018.08.00510.1016/j.ijmecsci.2018.08.005 ↗
11. X.X. Huang, N. Hansen and N. Tsuji: Science, 2006, vol. 312 (5771), pp. 249-51.10.1126/science.1124268 ↗
12. A. Jenab and A.K. Taheri: Mater. Sci. Tech.-Lond., 2011, vol. 27, pp. 1067-1072.10.1179/026708310X12683158443206 ↗
13. N. Ahmed and A. Hartmaier: Acta Mater., 2011, vol. 59 (11), pp. 4323-34.10.1016/j.actamat.2011.03.056 ↗
14. P.N. Rao, D. Singh and R. Javaganthan: Mater. Sci. Tech.-Lond., 2013, vol. 29 (1), pp. 76-82.10.1179/1743284712Y.0000000041 ↗
15. N. Kumar, R.S. Mishra, C.S. Huskamp and K.K. Sankaran: Scripta Mater., 2011, vol. 64 (6), pp. 576-79.10.1016/j.scriptamat.2010.11.051 ↗
16. H.W. Kim, S.B. Kang, N. Tsuji and Y. Minamino: Acta Mater., 2011, vol. 53 (6), pp. 1737-49.10.1016/j.actamat.2004.12.022 ↗
17. ASTM E112-96, Standard Test Methods for Determining Average Grain Size.
18. H.Y. Miao, S. Larose, C. Perron and M. Levesque: Surf. Coat. Tech., 2010, vol. 205(7), pp. 2055-2066.10.1016/j.surfcoat.2010.08.105 ↗
19. R. Fathallah, G. Inglebert and L. Castex: Mater. Sci. Tech.-Lond., 1998, vol. 14(7), pp. 631-639. 10.1179/mst.1998.14.7.631.10.1179/mst.1998.14.7.631 ↗
20. H. Wang, Y.B. Gu, X.Z. Guo, H.T. Wang, J. Tao and Y. Xu: J. Mech. Sci. Technol., 2018, vol. 32(10), pp. 4801-4812. 10.1007/s12206-018-0927-9.10.1007/s12206-018-0927-9 ↗
21. J.P. Nobre, A.M. Dias and M. Kornmeier: Exp. Mech., 2004, vol. 44(1), pp. 76-84. 10.1007/BF02427980.10.1007/BF02427980 ↗
22. D.N. Lee: Philos. Mag., 2005, vol. 85, pp. 297-322.10.1080/14786430412331315734 ↗
23. D.N. Lee: Scripta Metal. Mater., 1995, vol. 32(10), pp.1689-1694. 10.1016/0956-716X(95)00256-U.10.1016/0956-716X(95)00256-U ↗