journal article·2019-11Open access

Using Variant Selection to Facilitate Accurate Fitting of γ″ Peaks in Neutron Diffraction

R. Y. Zhang, H. L. Qin, Z. N. Bi, J. Li, S. Paul, T. L. Lee, B. Nenchev, J. Zhang, S. Kabra, J. F. Kelleher, H. B. Dong

Abstract

Abstract γ″ diffraction peaks are hard to discern in neutron/X-ray diffraction patterns, hindering studies on the γ″-strengthened superalloys using in-situ diffraction. In this study, we propose a variant selection method to increase the intensity of γ″ peaks and to facilitate accurate fitting. The specific variants of γ″ are controlled by applying a 300 MPa tensile stress during aging at 790 °C for 5 hours. The interaction energy between the applied stress and the transformation strain of each γ″ variant differs, leading to an increase in the amount of the variants with a greater energy reduction at the expense of other variants. The enhanced variants result in greater γ″ peak intensities in neutron diffraction patterns, allowing both the Pawley refinement and single peak fitting to be performed. Lattice parameters of γ″ and γ phases, and lattice misfit between the two phases and volume fraction of γ″ are acquired. The uncertainties associated with the fitting maintain an acceptable level corresponding to 150 microstrains. The proposed variant selection method shows potential for studying the role of γ″ phase in Ni-base superalloys.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. S. Ma, P. Rangaswamy, B.S. Majumdar: Scr. Mater., 2003, vol. 48, pp. 525-530.10.1016/S1359-6462(02)00504-3 ↗
2. J. Coakley, D. Dye: Scr. Mater., 2012, vol. 67, pp. 435-438.10.1016/j.scriptamat.2012.05.015 ↗
3. M.F. Dodge, M.F. Gittos, H. Dong, S.Y. Zhang, S. Kabra, J.F. Kelleher: Mater. Sci. Eng. A, 2015, vol. 627, pp. 161-170.10.1016/j.msea.2014.12.095 ↗
4. X.Z. Liang, M.F. Dodge, S. Kabra, J.F. Kelleher, T.L. Lee, H.B. Dong: Scr. Mater., 2018, vol. 143, pp. 20-24.10.1016/j.scriptamat.2017.09.001 ↗
5. D. Welton, N. D’Souza, J. Kelleher, S. Gardner, Z.H. Dong, G.D. West, H. Dong: Metall. Mater. Trans. A, 2015, vol. 46, pp. 4298-4315.10.1007/s11661-015-3046-6 ↗
6. H.J. Stone, T.M. Holden, R.C. Reed: Acta Mater., 1999, vol. 47, pp. 4435-4448.10.1016/S1359-6454(99)00314-6 ↗
7. S. Ma, D. Brown, M. Bourke, M. Daymond, B. Majumdar: Mater. Sci. Eng. A, 2005, vol. 399, pp. 141-153.10.1016/j.msea.2005.02.034 ↗
8. M.R. Daymond, M. Preuss, B. Clausen: Acta Mater., 2007, vol. 55, pp. 3089-3102.10.1016/j.actamat.2007.01.013 ↗
9. D. Dye, J. Coakley, V.A. Vorontsov, H.J. Stone, R.B. Rogge: Scr. Mater., 2009, vol. 61, pp. 109-112.10.1016/j.scriptamat.2009.03.008 ↗
10. J. Coakley, R.C. Reed, J.L.W. Warwick, K.M. Rahman, D. Dye: Acta Mater., 2012, vol. 60, pp. 2729-2738.10.1016/j.actamat.2012.01.039 ↗
11. J. Repper, P. Link, M. Hofmann, C. Krempaszky, W. Petry, E. Werner: Appl. Phys. A, 2010, vol. 99, pp. 565-569.10.1007/s00339-010-5607-2 ↗
12. P.E. Aba-Perea, T. Pirling, P.J. Withers, J. Kelleher, S. Kabra, M. Preuss: Materials & Design, 2016, vol. 89, pp. 856-863.10.1016/j.matdes.2015.09.152 ↗
13. R.C. Reed: The superalloys: fundamentals and applications, 1st. ed., Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
14. N. Zhou, D.C. Lv, H.L. Zhang, D. McAllister, F. Zhang, M.J. Mills, Y. Wang: Acta Mater., 2014, vol. 65, pp. 270-286.10.1016/j.actamat.2013.10.069 ↗
15. J.M. Oblak, D.F. Paulonis, D.S. Duvall: Metall. Trans., 1974, vol. 5, p. 143.10.1007/BF02644342 ↗
16. S.H. Wen, E. Kostlan, M. Hong, A.G. Khachaturyan, J.W. Morris: Acta Metall., 1981, vol. 29, pp. 1247-1254.10.1016/0001-6160(81)90015-8 ↗
17. C. Slama, C. Servant, G. Cizeron: J. Mater. Res., 1997, vol. 12, pp. 2298-2316.10.1557/JMR.1997.0306 ↗
18. A. Devaux, L. Nazé, R. Molins, A. Pineau, A. Organista, J.Y. Guédou, J.F. Uginet, P. Héritier: Mater. Sci. Eng. A, 2008, vol. 486, pp. 117-122.10.1016/j.msea.2007.08.046 ↗
19. M. Sundararaman, P. Mukhopadhyay, S. Banerjee: Metall. Trans. A, 1992, vol. 23, pp. 2015-2028.10.1007/BF02647549 ↗
20. K. Kulawik, P.A. Buffat, A. Kruk, A.M. Wusatowska-Sarnek, A. Czyrska-Filemonowicz: Mater. Charact., 2015, vol. 100, pp. 74-80.10.1016/j.matchar.2014.12.012 ↗
21. Y.-F. Han, P. Deb, M.C. Chaturvedi: Metal Science, 1982, vol. 16, pp. 555-562.10.1179/030634582790427118 ↗
22. M.K. Miller, S.S. Babu, M.G. Burke: Mater. Sci. Eng. A, 1999, vol. 270, pp. 14-18.10.1016/S0921-5093(99)00235-X ↗
23. A. Drexler, B. Oberwinkler, S. Primig, C. Turk, E. Povoden-Karadeniz, A. Heinemann, W. Ecker, M. Stockinger: Mater. Sci. Eng. A, 2018, vol. 723, pp. 314-323.10.1016/j.msea.2018.03.013 ↗
24. F. Theska, A. Stanojevic, B. Oberwinkler, S.P. Ringer, S. Primig: Acta Mater., 2018, vol. 156, pp. 116-124.10.1016/j.actamat.2018.06.034 ↗
25. R. Lawitzki, S. Hassan, L. Karge, J. Wagner, D. Wang, J. von Kobylinski, C. Krempaszky, M. Hofmann, R. Gilles, G. Schmitz: Acta Mater., 2019, vol. 163, pp. 28-39.10.1016/j.actamat.2018.10.014 ↗
26. F.S. Varley: Neutron News, 1992, vol. 3, pp. 29-37.
27. B.H. Toby, R.B. Von Dreele: J. Appl. Crystallogr., 2013, vol. 46, pp. 544-549.10.1107/S0021889813003531 ↗
28. H. Qin, Z. Bi, H. Yu, G. Feng, J. Du, J. Zhang: J. Alloys Compd., 2018, vol. 740, pp. 997-1006.10.1016/j.jallcom.2018.01.030 ↗
29. H. Qin, Z. Bi, H. Yu, G. Feng, R. Zhang, X. Guo, H. Chi, J. Du, J. Zhang: Mater. Sci. Eng. A, 2018, vol. 728, pp. 183-195.10.1016/j.msea.2018.05.016 ↗
30. M. Gao, D.G. Harlow, R.P. Wei, S. Chen: Metall. Mater. Trans. A, 1996, vol. 27, pp. 3391-3398.10.1007/BF02595432 ↗
31. D.Y. Li, L.Q. Chen: Acta Mater., 1997, vol. 45, pp. 471-479.10.1016/S1359-6454(96)00207-8 ↗
32. D.Y. Li, L.Q. Chen: Acta Mater., 1998, vol. 46, pp. 2573-2585.10.1016/S1359-6454(97)00478-3 ↗
33. M.T. Hutchings, P.J. Withers, T.M. Holden, T. Lorentzen: Introduction to the characterization of residual stress by neutron diffraction, Taylor & Francis, Boca Raton, Fla., 2005.10.1201/9780203402818 ↗
34. J. Santisteban, M. Daymond, J. James, L. Edwards: J. Appl. Crystallogr., 2006, vol. 39, pp. 812-825.10.1107/S0021889806042245 ↗
35. I.J. Moore, M.G. Burke, E.J. Palmiere: Acta Mater., 2016, vol. 119, pp. 157-166.10.1016/j.actamat.2016.08.027 ↗
36. R. Cozar, A. Pineau: Metall. Mater. Trans. B, 1973, vol. 4, pp. 47-59.10.1007/BF02649604 ↗
37. B.M.B. Grant, E.M. Francis, J. Quinta da Fonseca, M.R. Daymond, M. Preuss: Acta Mater., 2012, vol. 60, pp. 6829-6841.10.1016/j.actamat.2012.09.005 ↗
38. J.M. Carpenter, R.A. Robinson, A.D. Taylor, D.J. Picton: Nucl. Instrum. Methods Phys. Res. A, 1985, vol. 234, pp. 542-551.10.1016/0168-9002(85)91005-8 ↗
39. M.W. Johnson, M.R. Daymond: J. Appl. Crystallogr., 2002, vol. 35, pp. 49-57.10.1107/S002188980101891X ↗
40. M. Sundararaman, P. Mukhopadhyay, S. Banerjee: Metall. Trans. A, 1988, vol. 19, pp. 453-465.10.1007/BF02649259 ↗
41. A. Oradei-Basile, J.F. Radavich, in: E.A. Loria (Ed.) Superalloys 718, 625 and Various Derivatives, The Minerals, Metals & Materials Society, 1991, pp. 325 - 335.10.7449/1991/Superalloys_1991_325_335 ↗
42. Y. Ji, Y. Lou, M. Qu, J.D. Rowatt, F. Zhang, T.W. Simpson, L.-Q. Chen: Metall. Mater. Trans. A, 2016, vol. 47, pp. 3235-3247.10.1007/s11661-016-3480-0 ↗
43. B.H. Toby: Powder Diffr., 2006, vol. 21, pp. 67-70.10.1154/1.2179804 ↗
44. J.P. Collier, A.O. Selius, and J.K. Tien: in Superalloys, S. Reichman, D.N. Duhl, G. Maurer, S. Antolovich, and C. Lund, eds., The Metallurgical Society, 1988, pp. 43-52.
45. K. Kusabiraki, I. Hayakawa, S. Ikeuchi, T. Ooka: ISIJ Int., 1996, vol. 36, pp. 310-316.10.2355/isijinternational.36.310 ↗
46. J.N. Wagner, M. Hofmann, R. Wimpory, C. Krempaszky, M. Stockinger: Mater. Sci. Eng. A, 2014, vol. 618, pp. 271-279.10.1016/j.msea.2014.09.033 ↗
47. G.K. Williamson, W.H. Hall: Acta Metall., 1953, vol. 1, pp. 22-31.10.1016/0001-6160(53)90006-6 ↗