Effects of Strain Rate on the TRIP–TWIP Transition of an Austenitic Fe-18Mn-2Si-2Al Steel
Source abstract
Abstract
A fully austenitic Fe-18Mn-2Si-2Al transformation-induced plasticity (TRIP) steel was tensile tested from quasi-static to low-dynamic regime at three different strain rates: 4.7 × 10−4, 1.3 × 10−1, and 8.3 × 100 s−1. Typical two-stage transformation mechanism, TRIP γ → e → α′, was observed for samples tested at 4.7 × 10−4 s−1. At higher strain rates, the increase in temperature due to adiabatic plastic work shifts the stacking fault energy (SFE) towards a twinning-induced plasticity–SFE-range modifying the mechanical behavior of the alloy. This change on the deformation mechanism leads to a lower work hardening capacity and a higher elongation to rupture in samples tested at 1.3 × 10−1 and 8.3 × 100 s−1. In this context, the alloy maintains its energy absorption capability with a maximum reduction of 3.6 pct according to the Rm × A parameter. The Md temperature, experimentally determined in the present study, proved to be a useful tool for understanding the material’s behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. De Cooman BC, Chin K, Kim J (2011) In: Chiaberge M (ed) New Trends and Developments in Automotive System Engineering. InTech, London, pp. 101–28
2. 2 H. Hofmann, D. Mattissen, and T.W. Schaumann: Materwiss. Werksttech., 2006, vol. 37, pp. 716–23.10.1002/mawe.200600057 ↗
3. 3 O. Grässel, L. Krüger, G. Frommeyer, and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–409.10.1016/S0749-6419(00)00015-2 ↗
4. Grässel O, Frommeyer G, Derder C (1997) J Phys IV 07:383
5. 5 G. Frommeyer, U. Brüx, and P. Neumann: ISIJ Int., 2003, vol. 43, pp. 438–46.10.2355/isijinternational.43.438 ↗
6. 6 A. Sato, K. Soma, and T. Mori: Acta Metall., 1982, vol. 30, pp. 1901–7.10.1016/0001-6160(82)90030-X ↗
7. 7 M.C. Mcgrath, D.C. Van Aken, N.I. Medvedeva, and J.E. Medvedeva: Metall. Mater. Trans. A, 2013, vol 44, pp 4634–4643.10.1007/s11661-013-1820-x ↗
8. 8 H. Ding, H. Ding, D. Song, Z. Tang, and P. Yang: Mater. Sci. Eng. A, 2011, vol. 528, pp. 868–73.10.1016/j.msea.2010.10.040 ↗
9. 9 S.S.F. de Dafé, F.L. Sicupira, F.C.S. Matos, N.S. Cruz, D.R. Moreira, and D.B. Santos: Mater. Res., 2013, vol. 16, pp. 1229–36.10.1590/S1516-14392013005000129 ↗
10. 10 L. Bracke, L. Kestens, and J. Penning: Scr. Mater., 2007, vol. 57, pp. 385–8.10.1016/j.scriptamat.2007.05.003 ↗
11. 11 S.T. Pisarik and D.C. Aken: Metall. Mater. Trans. A, 2016, vol. 47, pp. 1009–18.10.1007/s11661-015-3265-x ↗
12. 12 W.Y. Jang, Q. Gu, J. Van Humbeeck, and L. Delaey: Mater. Charact., 1995, vol. 34, pp. 67–72.10.1016/1044-5803(94)00054-O ↗
13. 13 D.T. Pierce, J.A. Jimenez, J. Bentley, D. Raabe, C. Oskay, and J.E. Wittig: Acta Mater., 2014, vol. 68, pp. 238–53.10.1016/j.actamat.2014.01.001 ↗
14. 14 D.T. Pierce, J.A. Jimenez, J. Bentley, D. Raabe, and J.E. Wittig: Acta Mater., 2015, vol. 100, pp. 178–90.10.1016/j.actamat.2015.08.030 ↗
15. 15 S. Allain, J.P. Chateau, O. Bouaziz, S. Migot, and N. Guelton: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 158–62.10.1016/j.msea.2004.01.059 ↗
16. 16 S. Curtze and V.T. Kuokkala: Acta Mater., 2010, vol. 58, pp. 5129–41.10.1016/j.actamat.2010.05.049 ↗
17. 17 J.T. Benzing, W.A. Poling, D.T. Pierce, J. Bentley, K.O. Findley, D. Raabe, and J.E. Wittig: Mater. Sci. Eng. A, 2018, vol. 711, pp. 78–92.10.1016/j.msea.2017.11.017 ↗
18. 18 H.M. Rietveld: J. Appl. Crystallogr., 1969, vol. 2, pp. 65–71.10.1107/S0021889869006558 ↗
19. 19 L. Lutterotti, S. Matthies, H.R. Wenk, A.S. Schultz, and J.W. Richardson: J. Appl. Phys., 1997, vol. 81, pp. 594–600.10.1063/1.364220 ↗
20. 20 S. Xu, D. Ruan, J.H. Beynon, and Y. Rong: Mater. Sci. Eng. A, 2013, vol. 573, pp. 132–40.10.1016/j.msea.2013.02.062 ↗
21. 21 I. Gutierrez-Urrutia and D. Raabe: Acta Mater., 2011, vol. 59, pp. 6449–62.10.1016/j.actamat.2011.07.009 ↗
22. 22 P. Kürnsteiner, C. Commenda, E. Arenholz, L. Samek, D. Stifter, and H. Groiss: Materialia, 2018, vol. 1, pp. 70–7.10.1016/j.mtla.2018.04.001 ↗
23. 23 S. Pramanik, A.A. Gazder, A.A. Saleh, and E. V Pereloma: Mater. Sci. Eng. A, 2018, vol. 731, pp. 506–19.10.1016/j.msea.2018.06.024 ↗
24. 24 R.E. Schramm and R.P. Reed: Metall. Trans. A, 1975, vol. 6, pp. 1345–51.10.1007/BF02641927 ↗
25. 25 B.K. Zuidema, D.K. Subramanyam, and W.C. Leslie: Metall. Mater. Trans. A, 1987, vol. 18A, pp. 1629–39.10.1007/BF02646146 ↗
26. 26 W.C. Leslie and G.C. Rauch: Metall. Mater. Trans. A, 1978, vol. 9A, pp. 343–9.10.1007/BF02646383 ↗
27. 27 F. Lu, P. Yang, L. Meng, F. Cui, and H. Ding: J. Mater. Sci. Technol., 2011, vol. 27, pp. 257–65.10.1016/S1005-0302(11)60059-5 ↗
28. 28 S. V. Astafurov, G. G. Maier, E. V. Melnikov, V. A. Moskvina, M. Yu. Panchenko, E G. Astafurova: Mater. Sci. Eng. A, 2019, vol. 756, pp. 365–72.10.1016/j.msea.2019.04.076 ↗
29. 29 J. A. Lichtenfeld, M. C. Mataya, C. J. Van Tyne: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 147–61.10.1007/s11661-006-0160-5 ↗
30. 30 W.-S. Lee, G.-L. Xiea, and C.-F. Lin: Mater. Sci. Eng. A, 1998, vol. 257, pp. 256–67.10.1016/S0921-5093(98)00852-1 ↗
31. 31 P. Dixon, D. Parry: Journal de Physique IV, 1991, vol. 01, pp. 85-92.
32. Klitschke S, Trondl A, Huberth F, Liewald M (2018) IOP Conf Ser Mater Sci Eng 418:110.1088/1757-899X/418/1/012123 ↗
33. 33 L. Remy: Acta Metall., 1977, vol. 25, pp. 173–9.10.1016/0001-6160(77)90120-1 ↗
34. 34 O.A. Zambrano: J. Eng. Mater. Technol., 2016, vol. 138, p. 041010.10.1115/1.4033632 ↗
35. 35 G.B. Olson and M. Cohen: Metall. Trans. A, 1976, vol. 7, pp. 1897–904.
36. 36 P.J. Ferreira and P. Müllner: Acta Mater., 1998, vol. 46, pp. 4479–84.10.1016/S1359-6454(98)00155-4 ↗
37. 37 Y.K. Lee and C.S. Choi: Metall. Mater. Trans. A, 2000, vol. 31, pp. 355–60.10.1007/s11661-000-0271-3 ↗
38. 38 J. Kim and B.C. De Cooman: Mater. Sci. Eng. A, 2016, vol. 676, pp. 216–31.10.1016/j.msea.2016.08.106 ↗
39. 39 F. Berrenberg, C. Haase, L.A. Barrales-mora, and D.A. Molodov: Mater. Sci. Eng. A, 2016, vol. 681, pp. 56–64.10.1016/j.msea.2016.10.109 ↗