Mechanically Blended Al: Simple but Effective Approach to Improving Mechanical Property and Thermal Stability of Selective Laser-Melted Inconel 718
Source abstract
Abstract
Inconel718 (IN718) superalloy is one of the most widely employed high-temperature materials. How to improve its working temperature limit is a challenging but rewarding task. In this study, we have proved that by simply mechanical blending pre-alloyed IN718 powder with elemental Al powder, one can successfully add extra Al to the IN718 alloy. The Al-added IN718 alloys developed by this study show homogenous distribution of Al in the as-printed microstructure produced by selective laser melting (SLM), and only a slight loss of the Al amount is detected due to SLM in situ alloying. Excellent relative density of > 99.5 pct has been achieved, and after the standard heat treatment, the IN718 + 0.5Al alloy shows good mechanical properties, achieving a fracture strength of ~ 1400 MPa and elongation of ~ 12 pct. Introducing an extra amount of Al into the IN718 alloy has also improved thermal stability, in which testing is conducted at 680 °C and held for 100 hours. Meanwhile, it is noted that by a new heat treatment approach, the Al-doped IN718 alloy achieves the best fracture strength at ~ 1600 MPa and elongation at ~ 10 pct. The implications of the study have been addressed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. 1. E. A. Loria: JOM, 1988, vol. 40, pp. 36-41.10.1007/BF03258149 ↗
2. 2. R. F. Decker: JOM, 2006, vol. 58, pp. 32–36.10.1007/s11837-006-0079-8 ↗
3. 3. C.T. Sims, N.S. Stoloff, and W.C. Hagel: Superalloys II. Wiley-Interscience, New York, 1987, pp. 97-131.
4. 4. R.C. Reed: The Superalloys: Fundamentals and Applications. Cambridge University Press, New York, 2008, pp. 33-99.
5. 5. M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: Metall. Trans. A, 1988, vol. 19, pp. 453-65.10.1007/BF02649259 ↗
6. J.P. Collier, A.O. Selius, and J.K. Tien: Superalloys,1988, pp. 43–52.
7. 7. R. Martin and D. Evans: JOM, 2000, vol. 52, pp. 24-8.10.1007/s11837-000-0096-y ↗
8. 8. R. Cozar and A. Pineau: Metall. Trans., 1973, vol. 4, pp. 47-59.10.1007/BF02649604 ↗
9. 9. J.P. Collier, H.W. Song, J.K. Tien, and J.C. Phillips: Metall. Trans. A, 1988, vol. 19, pp. 1657–66.10.1007/BF02645133 ↗
10. 10. S.H. Fu, J.X. Dong, M.C. Zhang, and X.S. Xie: Mater. Sci. Eng. A, 2009, vol. 499, pp. 215-20.10.1016/j.msea.2007.11.115 ↗
11. W. D. Cao and R. Kennedy: Superalloys, 2004, 2004, pp. 91-99.10.7449/2004/Superalloys_2004_91_99 ↗
12. 12. I. Gibson, D.W. Rosen, and B. Stucker: Additive Manufacturing Technologies – Rapid Prototyping to Direct Digital Manufacturing. Springer, New York, 2010, pp. 32–55.10.1007/978-1-4419-1120-9 ↗
13. 13. C.Y. Yap, C.K. Chua, Z.L. Dong, Z.H. Liu, D.Q. Zhang, L.E. Loh, and S.L. Sing: Appl. Phys. Rev., 2015, vol. 2, pp. 41-101.10.1063/1.4935926 ↗
14. 14. K.N. Amato, S.M. Gaytan, L.E. Murr, E. Martinez, P.W. Shindo, J. Hernandez, S. Collins, and F. Medina: Acta Mater., 2012, vol. 60, pp. 2229-39.10.1016/j.actamat.2011.12.032 ↗
15. 15. Q. Jia and D. Gu: J. Alloy Comp., 2014, vol. 585, pp. 713-21.10.1016/j.jallcom.2013.09.171 ↗
16. X. Wang, R.M. Ward, M.H. Jacobs, and M.D. Barratt: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2981-89.10.1007/s11661-008-9638-7 ↗
17. 17. I. Gibson, D. Rosen, and B. Stucker: Additive Manufacturing Technologies.Springer, New York, 2010, pp 32–55.10.1007/978-1-4419-1120-9 ↗
18. 18. B. Zhang, N.E. Fenineche, H. Liao, and C. Coddet: J. Magn. Mater., 2013, vol. 336, pp. 49-54.10.1016/j.jmmm.2013.02.014 ↗
19. 19. B. Zhang, N.E. Fenineche, H. Liao, and C. Coddet: J. Mater. Sci. Technol., 2013, vol. 29, pp. 757-60.10.1016/j.jmst.2013.05.001 ↗
20. 20. J.P. Kruth, L. Froyen, J. Van Vaerenbergh, P. Mercelis, M. Rombouts, and B. Lauwers: J. Mater. Process. Technol., 2004, vol. 149, pp. 616-22.10.1016/j.jmatprotec.2003.11.051 ↗
21. 21. Q. Jia and D. Gu: J. Mater. Res., 2014, vol. 29, pp. 1960-9.10.1557/jmr.2014.130 ↗
22. 22. X. Yao, S.K. Moon, B.Y. Lee and G. Bi: Int. J. Precision Eng. Manufact., 2017, vol. 18, pp. 1693-1701.10.1007/s12541-017-0197-y ↗
23. 23. T. Trosch, J. Strößner, R. Völkl, and U. Glatzel: Mater. Lett., 2016, vol. 164, pp. 428-31.10.1016/j.matlet.2015.10.136 ↗
24. 24. M. Xia, D. Gu, G. Yu, D. Dai, H. Chen, and Q. Shi: Int. J. Mach. Tool Manufact., 2017, vol. 116, pp. 96-106.10.1016/j.ijmachtools.2017.01.005 ↗
25. M. J. Sohrabi, H. Mirzadeh, and M. Rafiei: Vacuum, 2018, vol. 154, pp. 235-43.10.1016/j.vacuum.2018.05.019 ↗
26. 26. Y. Zhang, Z. Li, P. Nie, and Y. Wu: Metall. Mater. Trans. A, 2013, vol. 44, pp. 708-16.10.1007/s11661-012-1459-z ↗
27. 27. M.D. Sangid, T.A. Book, D. Naragani, J. Rotella, P. Ravi, A. Finch, P. Kenesei, J.S. Park, H. Sharma, J. Almer, and X. Xiao, Add. Manufact., 2018, vol. 22, pp. 479-96.10.1016/j.addma.2018.04.032 ↗
28. 28. W.M. Tucho, P. Cuvillier, A.S. Kverneland, and V. Hansen: Mater. Sci. Eng. A, 2017, vol. 689, pp. 220-32.10.1016/j.msea.2017.02.062 ↗
29. 29. S.A. Khairallah, A.T. Anderson, A. Rubenchik, and W.E. King, Acta Mater., 2016, vol. 108, pp. 36-45.10.1016/j.actamat.2016.02.014 ↗
30. 30. E. Chlebus, K. Gruber, B. Kuźnicka, J. Kurzac, and T. Kurzynowski: Mater. Sci. Eng. A, 2015, vol. 639, pp. 647-55.10.1016/j.msea.2015.05.035 ↗
31. 31. S. Raghavan, B. Zhang, P. Wang, C.N. Sun, M.L. Sharon, T. Li, and J. Wei: Mater. Manufact. Process., 2017, vol. 32, pp. 1588-95.10.1080/10426914.2016.1257805 ↗
32. 32. W.M. Tucho, P. Cuvillier, A.S. Kverneland, and V. Hansen: Mater. Sci. Eng. A, 2017, vol. 689, pp. 220-32.10.1016/j.msea.2017.02.062 ↗
33. 33. G.H. Cao, T.Y. Sun, C.H. Wang, X. Li, M. Liu, Z.X. Zhang, P.F. Hu, A.M. Russell, R. Schneider, D. Gerthsen, Z.J. Zhou, C.P. Li, and G.F. Chen: Mater. Character., 2018, vol. 136, pp. 398-406.10.1016/j.matchar.2018.01.006 ↗
34. 34. Y. H. Zhou, Z. H. Zhang, Y. P. Wang, G. Liu, S. Y. Zhou, Y. L. Li, J. Shen, and M. Yan: Add. Manufact., 2019, vol. 25, pp. 204-17.10.1016/j.addma.2018.10.046 ↗