journal article·2018-09Open access

Influence of Heat Treatment on Defect Structures in Single-Crystalline Blade Roots Studied by X-ray Topography and Positron Annihilation Lifetime Spectroscopy

Jacek Krawczyk, Włodzimierz Bogdanowicz, Aneta Hanc-Kuczkowska, Anna Tondos, Jan Sieniawski

Abstract

Abstract Single-crystalline superalloy CMSX-4 is studied in the as-cast state and after heat treatment, with material being taken from turbine blade castings. The effect of the heat treatment on the defect structure of the root area near the selector/root connection is emphasized. Multiscale analysis is performed to correlate results obtained by X-ray topography and positron annihilation lifetime spectroscopy (PALS). Electron microscopy observations were also carried out to characterize the inhomogeneity in dendritic structure. The X-ray topography was used to compare defects of the misorientation nature, occurring in as-cast and treated states. The type and concentration of defects before and after heat treatment in different root areas were determined using the PALS method, which enables voids, mono-vacancies, and dislocations to be taken into account. In this way, differences in the concentration of defects caused by heat treatment are rationalized.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Muon and positron interactions and applications · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, UK, 2006.10.1017/CBO9780511541285 ↗
2. M.J. Donachie and S.J. Donachie: Superalloys - A technical Guide, 2nd ed., ASM International, Materials Park, 2002.10.31399/asm.tb.stg2.9781627082679 ↗
3. Teresa M. Pollock: J. Propul. Power, 2006, vol. 22, no. 2, pp. 361-74.10.2514/1.18239 ↗
4. G.E. Fuchs: Mater. Sci. Eng. A, 2001, vol. 300, pp. 52-60.10.1016/S0921-5093(00)01776-7 ↗
5. J.R. Li, J.Q. Zhao, S.Z. Liu, and M. Han: Superalloys 2008, TMS, 2008, pp. 443–51.
6. N. Stanford, A. Djakovic, B. Shollock, M. McLean, N. D’Souza, and P. Jennings: Superalloys 2004, TMS, 2004, pp. 719–26.10.7449/2004/Superalloys_2004_719_726 ↗
7. N. Stanford, A. Djakovic, B.A. Shollock, M. McLean, N. D’Souza, and P.A. Jennings: Scr. Mater., 2004, vol. 50 pp. 159-63.10.1016/j.scriptamat.2003.08.029 ↗
8. V.A. Vorontsov, L. Kovarik, M.J. Mills, and C.M.F. Rae: Acta Mater., 2012, vol. 60, pp. 4866-78.10.1016/j.actamat.2012.05.014 ↗
9. M. Huang, Z. Cheng, J. Xiong, J. Li, J. Huc, Z. Liu, and J. Zhu: Acta Mater., 2014, vol. 76, pp. 294-305.10.1016/j.actamat.2014.05.033 ↗
10. E. Rzyankina, D. Szeliga, N. Mahomed, and A. Nowotnik: Appl. Mech. Mater., 2013, vol. 372, pp. 54-61.10.4028/www.scientific.net/AMM.372.54 ↗
11. M. Ramsperger, L. Roncery, I. Lopez-Galilea, R.F. Singer, W. Theisen, and C. Körner: Adv. Eng. Mater., 2015, vol. 17, no. 10, pp. 1486-93.10.1002/adem.201500037 ↗
12. P. Zhang, Q. Zhu, G. Chen, H. Qin, and Ch. Wang: Materials, 2015, vol. 8, pp. 6179-94.10.3390/ma8095299 ↗
13. W. Bogdanowicz: Scr. Mater., 1997, vol. 37, 6, pp. 829-35.10.1016/S1359-6462(97)00169-3 ↗
14. K.G. Lipetzky, R.E. Green Jr. and P.J. Zombo: Nondestructive Characterization of Materials VIII, Springer, Boston, MA, 1998, pp. 423-30.10.1007/978-1-4615-4847-8_66 ↗
15. A. Onyszko, W. Bogdanowicz, K. Kubiak, and J. Sieniawski: Cryst. Res. Technol., 2010, vol. 45, no. 12, pp. 1326-32.10.1002/crat.201000389 ↗
16. J. Krawczyk, W. Bogdanowicz, J. Sieniawski, and K. Kubiak: Acta Phys. Pol., A, 2016, vol. 130, no. 4, pp. 1100-03.10.12693/APhysPolA.130.1100 ↗
17. H.E. Schaefer, F. Baier, M.A. Müller, K.J. Reichle, K. Reimann, A.A. Rempel, K. Sato, F. Ye, X. Zhang, and W. Sprenge: Phys. Status Solidi B, 2011, vol. 248, 10, pp. 2290-99.10.1002/pssb.201147103 ↗
18. S. van Petegem, J. Kuriplach, M. Hou, E.E. Zhurkin, D. Segers, A.L. Morales, S. Ettaoussi, C. Dauwe, and W. Mondelaers: Mater. Sci. Forum, 2001, vol. 363-65, pp. 210-12.10.4028/www.scientific.net/MSF.363-365.210 ↗
19. J.K. Tien, S.J. Tao, J.P. Wallace, and S. Purushothaman: Electron and Positron Spectroscopies in Materials Science and Engineering, Academic Press, New York, NY, 1979, pp. 73-118.10.1016/B978-0-12-139150-8.50009-9 ↗
20. T. Sadowski and P. Golewski: Loadings in Thermal Barrier Coatings of Jet Engine Turbine Blades: An Experimental Research and Numerical Modeling, Springer, Singapore, 2016.10.1007/978-981-10-0919-8 ↗
21. J. Krawczyk, A. Tondos, W. Bogdanowicz, and R. Paszkowski: Powder Metall. Met. Ceram., 2017, vol. 56, no. 7-8, pp. 481-86.10.1007/s11106-017-9919-z ↗
22. W. Bogdanowicz, A. Tondos, J. Krawczyk, R. Albrecht, and J. Sieniawski: Acta Phys. Pol., A, 2016, vol. 130, no. 4, pp. 1107-09.10.12693/APhysPolA.130.1107 ↗
23. J. Krawczyk, W. Bogdanowicz, and T. Goryczka: Cryst. Res. Technol., 2010, vol. 45, no. 12, pp. 1321–25.10.1002/crat.201000313 ↗
24. J. Kansy: Nucl. Instrum. Methods Phys. Res., Sect. A, 1996, vol. 374, pp. 235-44.10.1016/0168-9002(96)00075-7 ↗
25. J.E. Miller, M. Strangwood, S. Steinbach, and N. Warnken: Proceedings of the 5th Decennial International Conference on Solidification Processing, Old Windsor, July 2017.
26. O. Melikhova, J. Kuriplach, I. Prochazka, J. Cizek, M. Hou, E. Zhurkin, and S. Pisov: Appl. Surf. Sci., 2008, vol. 255, pp. 157-59.10.1016/j.apsusc.2008.05.291 ↗
27. D. Szeliga, K. Kubiak, and J. Sieniawski: J. Mater. Process. Technol., 2016, vol. 234, pp. 18-26.10.1016/j.jmatprotec.2016.03.003 ↗
28. W. Bogdanowicz, J. Krawczyk, A. Tondos, and J. Sieniawski: Cryst. Res. Technol., 2017, vol. 52, 1600372.10.1002/crat.201600372 ↗
29. N. D’Souza, P.A. Jennings, X.L. Yang, H.B. Dong, P. D. Lee, and M. McLean: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 657-65.10.1007/s11663-005-0056-6 ↗
30. K. Kubiak, D. Szeliga, J. Sieniawski, and A. Onyszko: Handbook of Crystal Growth: Bulk Crystal Growth, 2nd ed., Elsevier, Amsterdam, 2015, pp. 413-57.10.1016/B978-0-444-63303-3.00011-0 ↗
31. A.J. Torroba, O. Koeser, L. Calba, L. Maestro, E. Carreño-Morelli, R. Mehdi, S. Milenkovic, I. Sabirov, and J. Lorca: Integr. Mater. Manuf. Innov., 2014, vol. 3(1), pp. 1-25.10.1186/2193-9772-3-1 ↗