journal article·2018-08Open access

Microstructure Evolution in Cold-Rolled Pure Titanium: Modeling by the Three-Scale Crystal Plasticity Approach Accounting for Twinning

Karol Frydrych, Katarzyna Kowalczyk-Gajewska

Abstract

Abstract A three-scale crystal plasticity model is applied to simulate microstructure evolution in hcp titanium subjected to cold rolling. Crystallographic texture and misorientation angle development, as an indicator of grain refinement, are studied. The impact of twinning activity on both phenomena is accounted for by combining the original three-scale formulation with the probabilistic twin-volume consistent (PTVC) reorientation scheme. The modeling results are compared with available experimental data. It is shown that the simulated textures are in accordance with the experimental measurements. The basic components of misorientation angle distribution, especially in the range of high angle boundaries, are also well reproduced.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. D. Kuhlmann-Wilsdorf: Acta Mater., 1999. vol. 47, pp. 1697–1712.10.1016/S1359-6454(98)00413-3 ↗
2. X. Huang: Scripta mater., 1998. vol. 38, pp. 1697–1703.10.1016/S1359-6462(98)00051-7 ↗
3. D. A. Hughes and N. Hansen: Acta Mater., 1997. vol. 45, pp. 3871–3886.10.1016/S1359-6454(97)00027-X ↗
4. N. Hansen, X. Huang, and D. A. Hughes: Mater. Sci. Eng. A, 2001. vol. 317, pp. 3–11.10.1016/S0921-5093(01)01191-1 ↗
5. R.Z. Valiev and T. G. Langdon: Prog. Mater. Sci., 2006. vol. 51, pp. 881–981.10.1016/j.pmatsci.2006.02.003 ↗
6. T. G. Langdon: Mater. Sci. Eng. A, 2007. vol. 462, pp. 3–11.10.1016/j.msea.2006.02.473 ↗
7. I. J. Beyerlein and L. S. Tóth: Progress Mater. Sci., 2009. vol. 54, pp. 427–510.10.1016/j.pmatsci.2009.01.001 ↗
8. K. Frydrych and K. Kowalczyk-Gajewska: Mater. Sci. Eng.: A, 2016. vol. 658, pp. 490 – 502.10.1016/j.msea.2016.01.101 ↗
9. A. Jäger, V. Gärtnerova, and K. Tesař: Mater. Sci. Eng.: A, 2015. vol. 644, pp. 114–120.10.1016/j.msea.2015.07.038 ↗
10. C. F. Gu, L. S. Tóth, D. P. Field, J. J. Fundenberger, and Y. D. Zhang: Acta Mater., 2013. vol. 61, pp. 3027–3036.10.1016/j.actamat.2013.01.063 ↗
11. B. Beausir, S. Biswas, D. I. Kim, L. S. Tóth, and S. Suwas: Acta Mater., 2009. vol. 57(17), pp. 5061–5077.10.1016/j.actamat.2009.07.008 ↗
12. R. B. Figueiredo and T. G. Langdon: J. Mater. Sci., 2010. vol. 45(17), pp. 4827–4836.10.1007/s10853-010-4589-y ↗
13. C. W. Su, L. Lu, and M. O. Lai: Mater. Sci. Eng.: A, 2006. vol. 434(1-2), pp. 227–236.10.1016/j.msea.2006.06.103 ↗
14. M. Janeček, M. Popov, M. G. Krieger, R. J. Hellmig, and Y. Estrin: Mater. Sci. Eng.: A, 2007. vol. 462(1), pp. 116–120.10.1016/j.msea.2006.01.174 ↗
15. R. Lapovok, Y. Estrin, M. V. Popov, and T. G. Langdon: Advanced Engineering Materials, 2008. vol. 10(5), pp. 429–433.10.1002/adem.200700363 ↗
16. S. X. Ding, C. P. Chang, and P. W. Kao: Metall. Mater. Trans. A, 2009. vol. 40(2), pp. 415–425.10.1007/s11661-008-9747-3 ↗
17. D. K. Yang, P. Cizek, P. D. Hodgson, and C. E. Wen: Acta Mater., 2010. vol. 58(13), pp. 4536–4548.10.1016/j.actamat.2010.05.007 ↗
18. Z. Zeng, S. Jonsson, and H. J. Roven: Acta Mater., 2009. vol. 57(19), pp. 5822–5833.10.1016/j.actamat.2009.08.016 ↗
19. Y. Beygelzimer: Mech. Mater., 2005. vol. 37, pp. 753–767.10.1016/j.mechmat.2004.07.006 ↗
20. H. Petryk and S. Stupkiewicz: Mater. Sci. Eng. A, 2007. vol. 444, pp. 214–219.10.1016/j.msea.2006.08.076 ↗
21. T. Leffers: Int. J. Pasticity, 2001a. vol. 17, pp. 469–489.10.1016/S0749-6419(00)00059-0 ↗
22. T. Leffers: Int. J. Pasticity, 2001b. vol. 17, pp. 491–511.10.1016/S0749-6419(00)00060-7 ↗
23. I. J. Beyerlein, R. A. Lebensohn, and C. N. Tomé: Mater. Sci. Eng. A, 2003. vol. 345, pp. 122–138.10.1016/S0921-5093(02)00457-4 ↗
24. A. A. Nazarov, N. A. Enikeev, A. E. Romanov, T. S. Orlova, I. V. Alexandrov, I. J. Beyelein, and R. Z. Valiev: Acta Mater., 2006. vol. 54, pp. 985–995.10.1016/j.actamat.2005.10.025 ↗
25. N. A. Enikeev, M. F. Abdullin, A. A. Nazarov, and I. J. Beyerlein: Int. J. Mater. Res., 2007. vol. 98, pp. 167–171.10.3139/146.101451 ↗
26. L. S. Tóth, Y. Estrin, R. Lapovok, and C. Gu: Acta Mater., 2010. vol. 58, pp. 1782–1794.10.1016/j.actamat.2009.11.020 ↗
27. M. Ortiz and E. A. Repetto: J. Mech. Phys. Solids, 1999. vol. 36, pp. 286–351.
28. H. Petryk: C. R. Mecanique, 2003. vol. 331, pp. 469–474.10.1016/S1631-0721(03)00109-8 ↗
29. H. Petryk and M. Kursa: J. Mech. Phys. Solids, 2013. vol. 61, pp. 1854–1875.10.1016/j.jmps.2013.03.004 ↗
30. H. Petryk and M. Kursa: Int. J. Numer. Meth. Eng., 2015. vol. 61, pp. 1854–1875.
31. D. Raabe, Z. Zhao, and W. Mao: Acta Mater., 2002. vol. 50(17), pp. 4379 – 4394.10.1016/S1359-6454(02)00276-8 ↗
32. S.J. Park, H.N. Han, K.H. Oh, D. Raabe, and J.K. Kim: Mater. Sci. Forum (Switzerland), vol. 408, pp. 371–76.10.4028/www.scientific.net/MSF.408-412.371 ↗
33. P. D. Wu, Y. Huang, and D. J. Lloyd: Scripta materialia, 2006. vol. 54(12), pp. 2107–12.10.1016/j.scriptamat.2006.03.016 ↗
34. M. Knezevic, B. Drach, M. Ardeljan, and I. J. Beyerlein: Comput. Meth. Appl. Mech. Eng., 2014. vol. 277, pp. 239 – 259.10.1016/j.cma.2014.05.003 ↗
35. K. Frydrych and K. Kowalczyk-Gajewska: Unpublished Research, 2018.
36. D.-F. Zhang, H.-J. Hu, F.-S. Pan, M.-B. Yang, and J.-P. Zhang: T. Nonferr. Metal. Soc., 2010. vol. 20(3), pp. 478–483.10.1016/S1003-6326(09)60165-5 ↗
37. M. Z. Gzyl, A. Rosochowski, A. Milenin, and L. Olejnik: Comput. Meth. Mater. Sci., 2013. vol. 13(2), pp. 357–363.
38. H. Ding and Y.C. Shin: In ASME 2011 International Manufacturing Science and Engineering Conference, American Society of Mechanical Engineers, pp. 89–98.10.1115/MSEC2011-50220 ↗
39. Y. Estrin, L. S. Tóth, A. Molinari, and Y. Bréchet: Acta Mater., 1998. vol. 46, pp. 5509–5522.10.1016/S1359-6454(98)00196-7 ↗
40. L. S Tóth, A. Molinari, and Y. Estrin: Journal of engineering materials and technology, 2002. vol. 124(1), pp. 71–77.10.1115/1.1421350 ↗
41. H. Ding, N. Shen, and Y. C. Shin: J. Mater. Proc. Technol., 2012. vol. 212(5), pp. 1003–1013.10.1016/j.jmatprotec.2011.12.005 ↗
42. Y. B. Chun, S. H. Yu, S. L. Semiatin, and S. K. Hwang: Mater. Sci. Eng.: A, 2005. vol. 398(1), pp. 209–219.10.1016/j.msea.2005.03.019 ↗
43. N. Bozzolo, N. Dewobroto, H. R. Wenk, and F. Wagner: J. Mater. Sci., 2007. vol. 42(7), pp. 2405–2416.10.1007/s10853-006-1302-2 ↗
44. Y. Zhong, F. Yin, and K. Nagai: Journal of Materials Research, 2008. vol. 23(11), pp. 2954–2966.10.1557/JMR.2008.0354 ↗
45. S. V. Zherebtsov, G. S. Dyakonov, A. A. Salem, S. P. Malysheva, G. A. Salishchev, and S. L. Semiatin: Mater. Sci. Eng.: A, 2011. vol. 528(9), pp. 3474–3479.10.1016/j.msea.2011.01.039 ↗
46. S. V. Zherebtsov, G. S. Dyakonov, A. A. Salem, V. I. Sokolenko, G. A. Salishchev, and S. L. Semiatin: Acta Mater., 2013. vol. 61(4), pp. 1167–1178.10.1016/j.actamat.2012.10.026 ↗
47. R. A. Lebensohn and C. N. Tomé: Acta Metall. Mater., 1993. vol. 41, pp. 2611–2624.10.1016/0956-7151(93)90130-K ↗
48. K. Frydrych: Modelowanie ewolucji mikrostruktury metali o wysokiej wytrzymałości właściwej w procesach intensywnej deformacji plastycznej (Modelling the microstructure evolution of metals and alloys of high specific strength subjected to severe plastic deformation processes), Ph.D. thesis, in Polish, Warsaw, Poland, 2017.
49. A. Morawiec: Orientations and Rotations. Computations in Crystallographic Textures. Springer-Verlag, Berlin Heidelberg, 2004.10.1007/978-3-662-09156-2 ↗
50. K. Kowalczyk-Gajewska: Eur. J. Mech. Solids/A, 2010. vol. 29, pp. 28–41.10.1016/j.euromechsol.2009.07.002 ↗
51. P. Van Houtte: Acta Metall., 1978. vol. 26, pp. 591–604.10.1016/0001-6160(78)90111-6 ↗
52. K. Kowalczyk-Gajewska, Comput. Methods Mater. Sci., 2013, vol. 13(4), pp. 436–451.
53. S. R. Kalidindi: J. Mech. Phys. Solids, 1998. vol. 46, pp. 267–290.10.1016/S0022-5096(97)00051-3 ↗
54. G. Proust, C. N. Tomé, and G. C. Kaschner: Acta Mater., 2007. vol. 55, pp. 2137–2148.10.1016/j.actamat.2006.11.017 ↗
55. R. A. Lebensohn, H. Uhlenhut, C. Hartig, and H. Mecking: Acta Mater., 1998. vol. 46, pp. 229–236.
56. S. Dancette, L. Delannay, K. Renard, M.A. Melchior, and P.J. Jacques: Acta Mater., 2012. vol. 60, pp. 2135–2145.10.1016/j.actamat.2012.01.015 ↗
57. M. Homayonifar and J. Mosler: Int. J. Plasticity, 2012. vol. 28, pp. 1–20.10.1016/j.ijplas.2011.05.011 ↗
58. R. Hill and J. R. Rice: J. Mech. Phys. Solids, 1972. vol. 20, pp. 401–413.10.1016/0022-5096(72)90017-8 ↗
59. R. J. Asaro: J. Appl. Mech., 1983. vol. 50, pp. 921–934.10.1115/1.3167205 ↗
60. K. Kowalczyk-Gajewska, K. Sztwiertnia, J. Kawałko, K. Wierzbanowski, K. Wroński, K. Frydrych, S. Stupkiewicz, and H. Petryk: Mater. Sci. Eng. A, 2015. vol. 637, pp. 251–263.10.1016/j.msea.2015.04.040 ↗
61. K. Kowalczyk-Gajewska: IFTR Reports 1/2011, 2011, pp. 1–299.
62. A. A. Salem, S. R. Kalidindi, and S. L. Semiatin: Acta Mater., 2005. vol. 53, pp. 3495–3502.10.1016/j.actamat.2005.04.014 ↗
63. G. I. Taylor: Journal of Institute of Metals, 1938. vol. 62, pp. 307–324.
64. A. Molinari, G. R. Canova, and S. Ahzi: Acta Metall., 1987. vol. 35, pp. 2983–2994.10.1016/0001-6160(87)90297-5 ↗
65. C. N. Tomé and R. A. Lebensohn: Manual for Code Visco-Plastic Self-Consistent (VPSC), Version 7b. Tech. Rep., Los Alamos National Laboratory, 2007.
66. I. Karaman, H. Sehitoglu, A. J. Beaudoin, Y. I. Chumlyakov, H. J. Maier, and C. N. Tomé: Acta Mater., 2000. vol. 48, pp. 2031–2047.10.1016/S1359-6454(00)00051-3 ↗
67. G.S. Dyakonov, S. Mironov, S.V. Zherebtsov, S.P. Malysheva, G.A. Salishchev, A.A. Salem, and S.L. Semiatin: Materials Science and Engineering: A, 2014. vol. 607, pp. 145 – 154.10.1016/j.msea.2014.03.141 ↗
68. J. Zhang, G. Xi, X. Wan, and C. Fang: Acta Materialia, 2017. vol. 133, pp. 208 – 216.10.1016/j.actamat.2017.05.034 ↗
69. G. Salishchev, S. Mironov, S. Zherebtsov, and A. Belyakov: Materials Characterization, 2010. vol. 61(7), pp. 732 – 739.10.1016/j.matchar.2010.04.005 ↗