journal article·2018-07

Investigation of Ta-MX/Z-Phase and Laves Phase as Precipitation Hardening Particles in a 12 Pct Cr Heat-Resistant Steel

J. P. Sanhueza, D. Rojas, O. Prat, J. García, M. F. Meléndrez, S. Suarez

Publisher page

Abstract

A 12 pct Cr martensitic/ferritic steel was designed and produced to study Laves and Z-phase as precipitation hardening particles under creep conditions (650 °C). According to thermodynamic calculations, W and Cu additions were selected to ensure the precipitation of Laves after tempering. It is known that Z-phase formation does not follow the classical nucleation theory. Indeed, MX particles are transformed into Z-phase by Cr diffusion from the matrix to the precipitate. Therefore, to promote fast Z-phase formation, Ta, Co, and N additions were used to produce Ta-MX, which will be transformed into Z-phase. The main result achieved was the precipitation of Laves after tempering, with a particle size of 196 nm. As regards to Z-phase, the transformation of Ta-MX into Z-phase after tempering was confirmed by the formation of hybrid nanoparticles of 30 nm. Although W and Ta have a low diffusion in the martensitic/ferritic matrix, characterization of the precipitates after isothermal aging revealed that Laves and Z-phase have fast growth kinetics, reaching 400 and 143 nm, respectively, at 8760 hours. Consequently, creep test at 650 °C showed premature failures after few thousand hours. Therefore, it is expected that future research in the field of martensitic/ferritic steels will focus on the growth and coarsening behavior of Laves and Z-phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Kipelova, A. Belyakov, R. Kaibyshev: Mater. Sci. Eng. A, 2012, vol. 532, pp. 71– 77.10.1016/j.msea.2011.10.064 ↗
2. K. Rodak, A. Hernas, A. Kiełbus: Mater. Chem. Phys., 2003, vol. 81, pp. 483–485.10.1016/S0254-0584(03)00047-6 ↗
3. D. Rojas, J. Garcia, O. Prat, G. Sauthoff, A.R. Kaysser-Pyzalla: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5164-5176.10.1016/j.msea.2011.03.037 ↗
4. J. Hald: Int. J. Pres. Ves. Pip., 2008, vol. 85, pp. 30-37.10.1016/j.ijpvp.2007.06.010 ↗
5. A. Aghajani, C. Somsen, G. Eggeler: Acta Mater., 2009, vol. 57, pp. 5093-5106.10.1016/j.actamat.2009.07.010 ↗
6. B.S. SrinivasPrasad, V.B. Rajkumar, K.C. HariKumar: CALPHAD, 2012, vol. 36, pp. 1–7.10.1016/j.calphad.2011.10.006 ↗
7. I. Fedorova, A. Belyakov, P. Kozlov, V. Skorobogatykh, I. Shenkova, R. Kaibyshev: Mater. Sci. Eng. A, 2014, vol. 615, pp. 153–163.10.1016/j.msea.2014.07.046 ↗
8. F. Danoix, R. Danoix, J.Akr, A. Grellier, D. Delagnes: J. Microsc., 2011, Vol. 244, pp. 305-310.10.1111/j.1365-2818.2011.03537.x ↗
9. K. Maruyama, K. Sawada, J. Koike: ISIJ International, 2001, Vol. 41, pp. 641-653.10.2355/isijinternational.41.641 ↗
10. L. Cipolla, H. K. Danielsen, D. Venditti, P. E. Di Nunzio, J. Hald, M. A. J. Somers: Acta Mater., 2010, vol. 58, pp. 669–679.10.1016/j.actamat.2009.09.045 ↗
11. H. K. Danielsen, J. Hald: Mater. Sci. Eng. A, 2009, vol. 505, pp. 169–177.10.1016/j.msea.2008.11.019 ↗
12. F. Abe, M. Taneike, K. Sawada: Int. J. Pres. Ves. Pip., 2007, vol. 84, pp. 3–12.10.1016/j.ijpvp.2006.09.003 ↗
13. U. E. Klotz, C. Solenthaler, P. J. Uggowitzer: Mater. Sci. Eng. A, 2008, vol. 476, pp. 186–194.10.1016/j.msea.2007.04.093 ↗
14. D. Rojas, J. Garcia, O. Prat, C. Carrasco, G. Sauthoff, A.R. Kaysser-Pyzalla:Mater. Sci. Eng. A, 2010, vol. 527, pp. 3864–3876.10.1016/j.msea.2010.02.056 ↗
15. M. Staubli, K.-H. Mayer, T.-U. Kern, R.W. Vanstone, R. Hanus, J. Stief, and K.-H. Schönfeld: in Proc. COST 522—Power Gener. into the 21st Century, R. Viswanathan, W.T. Bakker, and J.D. Parker, eds., Advanced Steam Power Plant, University of Wales and EPRI, 2001, pp. 15–32.
16. N. Tanaka, R. Wicks, Power generation from coal, Measuring and reporting efficiency performance and CO2 emissions; International Energy Agency, Paris, France, 2010.
17. D. Schmidt,M.C. Galetz, M. Schütze: Surf. Coat. Tech., 2013, vol. 237, pp. 23-29.10.1016/j.surfcoat.2013.09.018 ↗
18. H. K. Danielsen, P. E. DiNunzio, J. Hald: Metall. Mater. Trans.A, 2013, vol. 44, pp. 2445-245210.1007/s11661-012-1583-9 ↗
19. M. Taneike, F. Abe, K. Sawada: Nature, 2003, vol. 424, pp. 294-296.10.1038/nature01740 ↗
20. H. K. Danielsen, J. Hald: CALPHAD, 2007, vol. 31, pp. 505–514.10.1016/j.calphad.2007.04.001 ↗
21. R. Agamennone, W. Blum, C. Gupta, J.K. Chakravartty: Acta Mater., 2009, vol. 54, pp. 3003-3014.10.1016/j.actamat.2006.02.038 ↗
22. O. Prat, J. Garcia, D. Rojas, C. Carrasco, A.R. Kaysser-Pyzalla: Mater. Sci. Eng. A, 2010, vol.527, pp. 5976–5983.10.1016/j.msea.2010.05.084 ↗
23. F. Liu, M. Rashidi, L. Johansson, J. Hald, H. O. Andrén: Scr. Mater., 2016, vol. 113, pp. 93–96.10.1016/j.scriptamat.2015.10.030 ↗
24. T. Sakthivel, M. Vasudevan, K. Lahan, P. Parameswaran, K.S. Chandravathi, S. PanneerSelvi, V. Maduraimuthu, M.D. Mathew: Mater. Sci. Eng. A, 2014, vol. 591, pp. 111–120.10.1016/j.msea.2013.10.071 ↗
25. M. Yoshizawa, M. Igarashi, K. Moriguchi, A. Iseda, H. G. Armaki, K. Maruyama: Mater. Sci. Eng. A, 2009, vol. 510–511, pp. 162–168.10.1016/j.msea.2008.05.055 ↗
26. H. K. Danielsen, J. Hald, Flemming B. Grumsen, Marcel A.J. Somers: Metall. Mater. Trans. A, 2006, vol. 37, pp. 2633-2640.10.1007/BF02586098 ↗
27. H. K. Danielsen, J. Hald: Scr. Mater., 2009, vol. 60, pp. 811–813.10.1016/j.scriptamat.2009.01.025 ↗
28. H. K. Danielsen, J. Hald, M. A.J. Somers: Scr. Mater., 2012, vol. 66, pp. 261–264.10.1016/j.scriptamat.2011.11.005 ↗
29. O. Prat, J. Garcia, D. Rojas, C. Carrasco, G. Inden: Acta Mater., 2010, vol.58,pp. 6142–6153.10.1016/j.actamat.2010.07.033 ↗
30. TCFE8—TCS Steels/Fe-Alloys Database, Version 8.0. http://www.thermocalc.com/products-services/databases/thermodynamic/. Accessed 21 Sep 2016.
31. D.R.G. Mitchell, S. Sulaiman: Mater.Charact., 2006, vol. 56, pp. 49–58.10.1016/j.matchar.2005.09.004 ↗
32. P .Hofer, H. Cerjak, P. Warbichler: Mater. Sci Technol., 2000, vol. 16, pp. 1221– 1225.10.1179/026708300101506984 ↗
33. P.J. Goodhew, F.J. Humphreys, Electron Microscopy and Analysis, Taylor and Francis, London, 1988, pp. 39-61.
34. K.W. Andrews, D.J. Dyson, S.R. Keown, “Interpretation of Electron Diffraction Patterns”, Adam Hilger Ltd, London, 1971, pp. 71-125.
35. P. Ettmayer: Monatsh. Chem., 1971, vol. 102, pp. 858–863.10.1007/BF01167270 ↗
36. H. K. Danielsen, J. Hald: Energy Mater., 2006, vol.1, pp. 49–57.10.1179/174892306X99732 ↗
37. M.I. Isik, A. Kostka, V.A. Yardley, K.G. Pradeep, M.J. Duarte, P.P. Choi, D. Raabe and G. Eggeler: ActaMater., 2015, vol. 90, pp. 94–104.10.1016/j.actamat.2015.01.027 ↗
38. M.I. Isik, A. Kostka, G. Eggeler: Acta Mater., 2014, vol.81,pp. 230–240.10.1016/j.actamat.2014.08.008 ↗
39. O. Prat, J. García, D. Rojas, J.P. Sanhueza, C. Camurri: Mater. Chem. Phys., 2014, vol. 143, pp. 754-764.10.1016/j.matchemphys.2013.10.010 ↗
40. B. S. Ku and J. Yu: Scr. Mater., 2001, vol. 45, pp. 205-211.10.1016/S1359-6462(01)01019-3 ↗
41. L. Helis, Y. Toda, T. Hara, H. Miyazaki, and F. Abe: Proc. 34th MPA Semin., Stuttgart, Germany, 2008, MPA Stuttgart, Paper 9.
42. H. K. Danielsen: Mater. Sci. Tech., 2016, vol. 32, pp. 126-137.10.1179/1743284715Y.0000000066 ↗
43. W. Yan, W. Wang, Y. Shan, V. Yang, and W. Sha: 9–12% Cr Heat Resistant Steels, Illustrated edition, Springer, Cham, 2015, p. 152.10.1007/978-3-319-14839-7 ↗
44. M. Tamura, H. Kusuyama, K. Shinozuka, H. Esaka: J. Nucl. Mater., 2007, vol. 367–370, pp. 137–141.10.1016/j.jnucmat.2007.03.154 ↗
45. M. Tamura, K. Shinozuka, K. Masamura, K. Ishizawa, S. Sugimoto: J. Nucl. Mater., 1998, vol. 258-263, pp. 1158-1162.10.1016/S0022-3115(98)00151-2 ↗
46. M. Tamura , H. Sakasegawa, A. Kohyama, H. Esaka, K. Shinozuka: J. Nucl. Mater., 2004,vol. 329–333, pp. 328–332.10.1016/j.jnucmat.2004.04.046 ↗
47. M. Gao, S. T. Bradley, Y. Cao, D. Jena, Y. Lin, S. A. Ringel, J. Hwang, W. J. Schaff, L. J. Brillson: J. Appl. Phys., 2006, vol. 100, pp. 1-12.10.1007/11378235_1 ↗
48. J.P. Sanhueza, D. Rojas, O. Prat, J. Garcia, R. Espinoza, C. Montalba, M.F. Melendrez: Mater. Chem. Phys., 2017, Vol. 200, pp. 342-353.10.1016/j.matchemphys.2017.07.083 ↗
49. M. Rashidi: Development of a new generation of creep resistant 12% chromium steels: Microstructure of Z-phase strengthened steels, Chalmers University of Technology, Gothenburg, Sweden, 2017, pp. 48-51.
50. M. Rashidi, H. O. Andrén, F. Liu: Microsc. Microanal., 2017, Vol. 23, pp. 360-365.10.1017/S1431927617000174 ↗
51. H.K. Danielsen, S. Kadkhodazadeh, F.B. Grumsen, M.A.J. Somers: Philos. Mag., 2014, vol. 94, pp. 2339–2349.10.1080/14786435.2014.913112 ↗
52. M. Y.Kima, S. M. Hong, K. H. Lee, W. S. Jung, Y. S. Lee, Y. K. Lee, J. H. Shim: Mater.Charact., 2017, vol. 129, pp. 40–45.10.1016/j.matchar.2017.04.020 ↗