Quantitative Experimental Study of Defects Induced by Process Parameters in the High-Pressure Die Cast Process
Source abstract
Abstract
A quantitative experimental study of the effects of process parameters on the formation of defects during solidification of high-pressure die cast magnesium alloy components is presented. The parameters studied are slow-stage velocity, fast-stage velocity, intensification pressure, and die temperature. The amount of various defects are quantitatively characterized. Multiple runs of the commercial casting simulation package, ProCAST™, are used to model the mold-filling and solidification events. Several locations in the component including knit lines, last-to-fill region, and last-to-solidify region are identified as the critical regions that have a high concentration of defects. The area fractions of total porosity, shrinkage porosity, gas porosity, and externally solidified grains are separately measured. This study shows that the process parameters, fluid flow and local solidification conditions, play major roles in the formation of defects during HPDC process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. B.L. Mordike, T. Elbert, Mater. Sci. Eng. A. 2001, vol. 302, pp. 37–45.10.1016/S0921-5093(00)01351-4 ↗
2. A.K. Dahl, S. Sannes, D.H. St. John, H. Westengen, J. Light Metals, 2001, vol. 1, pp. 99–103.10.1016/S1471-5317(01)00002-5 ↗
3. Z. Yang, A. Maurey, J. Kang, D. Wilkinson, J. Mater. Charact., 2016, vol. 114, pp. 254–262.10.1016/j.matchar.2016.02.007 ↗
4. A. Balasundaram, A.M. Gokhale. Mater. Charact., 2001, vol. 44, 419–42610.1016/S1044-5803(01)00141-3 ↗
5. S. Amira, D. Dubé, R. Tremblay, E. Ghali. Mater. Charact., 2013, vol. 76, pp. 48–54.10.1016/j.matchar.2012.12.004 ↗
6. P. Sharifi, Y. Fan, J.P. Weiler, J.T. Wood, J. Alloys Compd., 2014, vol. 605, pp. 237–243.10.1016/j.jallcom.2014.03.043 ↗
7. P. Sharifi, Y. Fan, H. B. Anaraki, A. Banerjee, K. Sadayappan, J.T. Wood, Metall. Mater. Trans. A., 2016, vol. 47A, pp. 5159–5168.10.1007/s11661-016-3698-x ↗
8. JP Weiler, JT Wood, RJ Klassen, Eric Maire, R Berkmortel, G Wang, J. Mater. Sci. (2005), 395, 315-322.10.1016/j.msea.2004.12.042 ↗
9. M. S. Dargusch, G. Dour, N. Schauer, C.M. Dinnis, G. Savage, J. Mater. Process. Technol. (2006), 180, 37–43.10.1016/j.jmatprotec.2006.05.001 ↗
10. Y.J. Huang, B.H. Hu, I. Pinwill, W. Zhou, D.M.R. Taplin, Mater. Manuf. Processes. (2000) 15, 97–105.10.1080/10426910008912975 ↗
11. S.G. Lee, A.M. Gokhale, G.R. Patel, M. Evans Mater. Sci. Eng. A. (2006), 427, 99–111.10.1016/j.msea.2006.04.082 ↗
12. J.P.Weiler, J.T.Wood, J. Alloys Compd. (2012), 537, 133–140.10.1016/j.jallcom.2012.05.090 ↗
13. C. D.Lee, T. So, K.S.Shin Mater. Sci. Eng. A. (2014), 599, 28–37.10.1016/j.msea.2014.01.063 ↗
14. A.K. Dahle, D.H. StJohn, Acta Mat. (1999), 47, 31-41.10.1016/S1359-6454(98)00342-5 ↗
15. H.I. Laukli, O. Lohne, S. Sannes, H. Gjestland, L. Arnberg, Int. J. Cast Metals Res., 2016, vol. 16, pp. 515–521.10.1080/13640461.2003.11819629 ↗
16. P. Sharifi, Y. Fan, K. Sadayappan, G. Birsan, J.T. Wood: Magnesium Technology 2015, TMS, Warrendale, PA, 2015, pp. 351–56.10.1007/978-3-319-48185-2_65 ↗
17. P. Sharifi, J. Jamali, K. Sadayappan, J.T. Wood, J. Mater. Sci. Technol., 2018, vol. 34, pp. 324–334.10.1016/j.jmst.2016.09.004 ↗
18. J. Song, S.M.Xiong, M.Li,J.Allison, Mater.Sci.Eng. A. (2009), 520, 197–201.10.1016/j.msea.2009.05.042 ↗
19. C. Dørum, H.I. Laukli, O.S. Hopperstad, Computational Materials Science. (2009), 46,100–11110.1016/j.commatsci.2008.12.022 ↗
20. P. Sharifi, Y. Fan1,G. Birsan, J. Wood, Materials Science Forum . (2017), 879, 1755-1759.10.4028/www.scientific.net/MSF.879.1755 ↗
21. C.M. Gourlay, H.I. Laukli, A.K. Dahle, Metall. Mater. Trans. A., 2008, vol. 38A, pp. 1833–1844.
22. C.M. Gourlay, H.I. Laukli, A.K. Dahle, Metall. Mater. Trans. A., 2004, vol. 35, pp. 2881–2891.10.1007/s11661-004-0236-z ↗