Fabrication of Carbon Nanofibers/A356 Nanocomposites by High-Intensity Ultrasonic Processing
Source abstract
Abstract
A356 alloy reinforced with carbon nanofibers (CNFs) was fabricated by high-intensity ultrasonic vibration processing. The microstructure and mechanical properties were investigated. The distribution of CNFs became more and more uniform with the increase of ultrasonic power, and the mechanical properties of nanocomposites were significantly enhanced accordingly. The yield strength (YS), ultimate tensile strength (UTS), and microhardness of the nanocomposite increased by 38.3, 21.9, and 43.2 pct, respectively, at a CNF content of 0.9 wt pct compared with the matrix without CNF addition. The improvement in mechanical properties was the effect of CNFs on the thermal expansion mismatch strengthening of the nanocomposite, the grain refinement of the nanocomposite, and the load transfer from the matrix to the nanofibers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Additive Manufacturing and 3D Printing Technologies · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. S. Xie, W. Li, Z. Pan, B. Chang, and L. Sun: J. Phys. Chem. Solids, 2000, vol. 61, pp. 1153–58.10.1016/S0022-3697(99)00376-5 ↗
2. H. Kwon, G.G. Lee, S.G. Kim, B.W. Lee, W.C. Seo, and L. Marc: Mater. Sci. Eng. A, 2015, vol. 632, pp. 72–77.10.1016/j.msea.2015.02.057 ↗
3. P. Pripanapong, S.F. Li, J. Umeda, and K. Kondoh: MMSE, 2016, pp. 2412–5954.
4. F. Ogawa and C. Masuda: Compos. Part A, 2015, vol. 71, pp. 84–94.10.1016/j.compositesa.2015.01.005 ↗
5. A. Esawia and K. Morsib: Compos. Part A, 2007, vol. 38, pp. 646–50.10.1016/j.compositesa.2006.04.006 ↗
6. B. Amgalan, I. Batchuulun, U. Batjargal, J.Y. Lee, and H.K. Choi: Powder Technol., 2010, vol. 42, pp. 11–20.
7. X.D. Yang, E.Z. Liu, C.S. Shi, C.N. He, J.J. Li, N.Q. Zhao, and K. Katsuyoshi: J. Alloy Compd., 2013, vol. 563, pp. 216–20.10.1016/j.jallcom.2013.02.066 ↗
8. J.J. Moses, I. Dinaharan, and S.J. Sekhar: Trans. Nonferr. Met. Soc., 2016, vol. 26, pp. 1498–1511.10.1016/S1003-6326(16)64256-5 ↗
9. X.H. Chen and H. Yan: J. Mater. Res., 2015, vol. 30, pp. 2197–2209.10.1557/jmr.2015.198 ↗
10. G.I. Eskin: Ultrason. Sonochem., 2001, vol. 8, pp. 319–25.10.1016/S1350-4177(00)00074-2 ↗
11. Y. Yang, J. Lan, and X. Li: Mater. Sci. Eng., A, 2004, vol. 380, pp. 378–83.10.1016/j.msea.2004.03.073 ↗
12. C. Sautera, M.A. Emin, H.P. Schuchmann, and S. Tavman: Ultrason. Sonochem., 2008, vol. 15, pp. 517–23.10.1016/j.ultsonch.2007.08.010 ↗
13. L. Liu, Y.D. Huang, Z.Q. Zhang, and X.B Yang: J. Appl. Polym. Sci., 2006, vol. 99, pp. 3172–77.10.1002/app.22859 ↗
14. Y.L. Li and T.G. Zhou: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 3337–43.10.1007/s11661-013-1667-1 ↗
15. S.R. Galleguillos, H.Y. Varga, and G.L. Gaete: Ultrason. Sonochem., 2017, vol. 35, pp. 134–41.10.1016/j.ultsonch.2016.09.011 ↗
16. H. Yan, Z.X. Huan, and H.X. Qiu: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 1–9.
17. J.I. Youn, B.I. Kang, D.G. Ko, and Y. J. Kim: Int. J. Cast. Met. Res., 2008, vol. 21, pp. 135–38.10.1179/136404608X361828 ↗
18. Z.W. Shao, Q.C. Le, Z.Q. Zhang, and J.Z. Cui: Metall. Mater. Int., 2012, vol. 18, pp. 209–15.10.1007/s12540-012-2002-x ↗
19. Z.B. Yang, W. Zhou, and P. Wu: Mater. Sci. Eng. A, 2014, vol. 590, pp. 295–300.10.1016/j.msea.2013.10.008 ↗
20. Z.Y. Liu, S.J. Xu, B.L. Xiao, P. Xue, W.G. Wang, and Z.Y. Ma: Compos. Part A–Appl. S, 2012, vol. 43, pp. 2161–68.10.1016/j.compositesa.2012.07.026 ↗
21. U. Toshiyuki, Y. Takashi, S. Kiminori, M. Yukio, and E. Morinobu: Jpn. Soc. Powder Metall., 2008, vol. 54, pp. 595–600.
22. R. George, K.T. Kashyap, R. Rahul, and S. Yamdagni: Materials, 2005, vol. 53, pp. 1159–63.
23. L. Aicha, B.F. Roberto, B. Thierry, B. François, C. Rafik, and G.L. Terence: Mater. Sci. Eng. A-Struct., 2012, vol. 532, pp. 139–45.10.1016/j.msea.2011.10.074 ↗
24. W. Hu, Z.H. Zhang, H.M. Zhang, Z.Y. Hu, S.L. Li, and X.W. Cheng: 2017, vol. 696, pp. 80–89.10.1016/j.msea.2017.04.055 ↗
25. H.J. Choi, G.B. Kwon, G.Y. Lee, and D.H. Bae: Scripta Mater., 2008, vol. 59, pp. 360–63.10.1016/j.scriptamat.2008.04.006 ↗