journal article·2017-12

Tempering of Martensite and Subsequent Redistribution of Cr, Mn, Ni, Mo, and Si Between Cementite and Martensite Studied by Magnetic Measurements

Javad Mola, Guoqing Luan, David Brochnow, Olena Volkova, Jun Wu

Publisher page

Abstract

Tempering reactions in ternary Fe-2M-0.7C steels (M=Cr, Ni, Mn, Mo, and Si) were studied by correlative dilatometry and magnetic measurements at room temperature. Magnetic measurements were conducted after tempering at progressively higher temperatures. Based on the magnitude of demagnetization in the temperature range associated with the tempering stage I contraction, Mn- and Si-added steels formed the largest and smallest fractions of transition carbides, respectively. Estimation of the magnetization of paraequilibrium cementite indicated that Cr, Mn, and Mo reduced the magnetization while Ni increased it. In the presence of Si, the decomposition of retained austenite and cementite formation were shifted to higher temperatures. At temperatures above approximately 723 K (450 °C), the enrichment of cementite with Mn and Cr significantly reduced the total magnetization. In the Mo-added steel, on the other hand, the magnetization slightly increased implying the formation of ferromagnetic Mo-rich carbides. For the Ni- and Si-added steels, the magnetization remained almost constant indicating minimal redistribution of Ni and Si subsequent to the formation of cementite. The possibility of analyzing the latter redistribution is one of the main advantages of sequential tempering and magnetic measurements at room temperature compared to in situ thermomagnetic measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels · Metallurgy and Cultural Artifacts

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. M. K. Miller, P. A. Beaven, and G. D. W. Smith: Metall. Trans. A, 1981, vol. 12, pp. 1197–1204.10.1007/BF02642333 ↗
2. S. J. Barnard, G. D. W. Smith, M. Sarikaya, and G. Thomas: Scr. Metall., 1981, vol. 15, pp. 387–92.10.1016/0036-9748(81)90216-7 ↗
3. Christoph Lerchbacher, Silvia Zinner, and Harald Leitner: Micron, 2012, vol. 43, pp. 818–26.10.1016/j.micron.2012.02.005 ↗
4. Keith A. Taylor and Morris Cohen: Prog. Mater. Sci., 1992, vol. 36, pp. 151–272.10.1016/0079-6425(92)90010-5 ↗
5. Y. Ohmori and I. Tamura: Metall. Trans. A, 1992, vol. 23, pp. 2737–51.10.1007/BF02651753 ↗
6. S. Nagakura, Y. Hirotsu, M. Kusunoki, T. Suzuki, and Y. Nakamura: Metall. Mater. Trans. A, 1983, vol. 14, pp. 1025–31.10.1007/BF02659851 ↗
7. G. R. Speich and W. C. Leslie: Metall. Trans., 1972, vol. 3, pp. 1043–54.10.1007/BF02642436 ↗
8. C. B. Ma, T. Ando, D. L. Williamson, and G. Krauss: Metall. Trans. A, 1981, vol. 14, pp. 1033–45.10.1007/BF02659852 ↗
9. W. Crafts and J.L. Lamont: AIME Tech. Publ., 1948, pp. 1–42.
10. T. Waterschoot, K. Verbeken, and B.C. De Cooman: ISIJ Int., 2006, vol. 46, pp. 138–46.10.2355/isijinternational.46.138 ↗
11. Minsu Jung, Seok-Jae Lee, and Young-Kook Lee: Metall. Mater. Trans. A, 2009, vol. 40, pp. 551–59.10.1007/s11661-008-9756-2 ↗
12. Liu Cheng, C. M. Brakman, B. M. Korevaar, and E. J. Mittemeijer: Metall. Trans. A, 1988, vol. 19, pp. 2415–26.10.1007/BF02645469 ↗
13. Liu Cheng and E. J. Mittemeijer: Metall. Trans. A, 1990, vol. 21, pp. 13–26.10.1007/BF02656420 ↗
14. Jae-Gil Jung, Minsu Jung, Singon Kang, and Young-Kook Lee: J. Mater. Sci., 2013, vol. 49, pp. 2204–12.10.1007/s10853-013-7914-4 ↗
15. M. Preciado and M. Pellizzari: J. Mater. Sci., 2014, vol. 49, pp. 8183–91.10.1007/s10853-014-8527-2 ↗
16. S. Primig and H. Leitner: Thermochim. Acta, 2011, vol. 526, pp. 111–17.10.1016/j.tca.2011.09.001 ↗
17. V. G Gavriljuk: Mater. Sci. Eng. A, 2003, vol. 345, pp. 81–89.10.1016/S0921-5093(02)00358-1 ↗
18. Ph Dünner and S Müller: Acta Metall., 1965, vol. 13, pp. 25–36.10.1016/0001-6160(65)90021-0 ↗
19. H. S. Yang and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 2007, vol. 23, pp. 556–60.10.1179/174328407X176857 ↗
20. J. Crangle and G. M. Goodman: Proc. R. Soc. Lond. Ser. Math. Phys. Sci., 1971, vol. 321, pp. 477–91.10.1098/rspa.1971.0044 ↗
21. A. T. Aldred: Phys. Rev. B, 1976, vol. 14, pp. 219–27.10.1103/PhysRevB.14.219 ↗
22. Hiroshi Yamauchi, Hiroshi Watanabe, Yūichi Suzuki, and Hideo Saito: J. Phys. Soc. Jpn., 1974, vol. 36, pp. 971–74.10.1143/JPSJ.36.971 ↗
23. D. Parsons, W. Sucksmith, and J. E. Thompson: Philos. Mag., 1958, vol. 3, pp. 1174–1184.10.1080/14786435808237047 ↗
24. J. Crangle and G. C. Hallam: Proc. R. Soc. Lond. Math. Phys. Eng. Sci., 1963, vol. 272, pp. 119–32.10.1098/rspa.1963.0045 ↗
25. A. T. Aldred: J. Phys. C Solid State Phys., 1968, vol. 1, p. 244.10.1088/0022-3719/1/1/327 ↗
26. Javad Mola and Bruno C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44, pp. 946–67.10.1007/s11661-012-1420-1 ↗
27. R. Rahimi, H. Biermann, J. Mola, and R. Ritzenhoff: in HNS 2014, Hamburg, Germany, 2014, pp. 182–90.
28. R. M. Horn and Robert O. Ritchie: Metall. Trans. A, 1978, vol. 9, pp. 1039–53.10.1007/BF02652208 ↗
29. L. J. E. Hofer and Ernst M. Cohn: J. Am. Chem. Soc., 1959, vol. 81, pp. 1576–82.10.1021/ja01516a016 ↗
30. K. O. Findley, J. Hidalgo, R. M. Huizenga, and M. J. Santofimia: Mater. Des., 2017, vol. 117, pp. 248–56.10.1016/j.matdes.2016.12.065 ↗
31. Chen Zhu, X. Y. Xiong, A. Cerezo, R. Hardwicke, G Krauss, and G. D. W. Smith: Ultramicroscopy, 2007, vol. 107, pp. 808–12.10.1016/j.ultramic.2007.02.033 ↗
32. A. J. Clarke, M. K. Miller, R. D. Field, D. R. Coughlin, P. J. Gibbs, K. D. Clarke, D. J. Alexander, K. A. Powers, P. A. Papin, and G. Krauss: Acta Mater., 2014, vol. 77, pp. 17–27.10.1016/j.actamat.2014.05.032 ↗
33. J. Akré, F. Danoix, H. Leitner, and P. Auger: Ultramicroscopy, 2009, vol. 109, pp. 518–23.10.1016/j.ultramic.2008.11.010 ↗
34. Akio Kagawa and Taira Okamoto: Trans. Jpn. Inst. Met., 1979, vol. 20, pp. 659–66.10.2320/matertrans1960.20.659 ↗
35. G. P. Huffman, P. R. Errington, and R. M. Fisher: Phys. Status Solidi B, 1967, vol. 22, pp. 473–81.10.1002/pssb.19670220219 ↗
36. Toshihiko Shigematsu: J. Phys. Soc. Jpn., 1974, vol. 37, pp. 940–45.10.1143/JPSJ.37.940 ↗
37. Eun Jung Seo, Lawrence Cho, Yuri Estrin, and Bruno C. De Cooman: Acta Mater., 2016, vol. 113, pp. 124–39.10.1016/j.actamat.2016.04.048 ↗
38. W. Pepperhoff and M. Acet: Constitution and Magnetism of Iron and Its Alloys, 1st ed., Springer, Berlin, 2001.10.1007/978-3-662-04345-5_1 ↗
39. B.A. Apaev: Magnetic phase analysis of alloys, Moscow Steel, Moscow, 1976.
40. T. P. Hou, Y. Li, Y. D. Zhang, and K. M. Wu: Metall. Mater. Trans. A, 2014, vol. 45, pp. 2553–61.10.1007/s11661-014-2188-2 ↗
41. Y. J. Li, P. Choi, S. Goto, C. Borchers, D. Raabe, and R. Kirchheim: Acta Mater., 2012, vol. 60, pp. 4005–16.10.1016/j.actamat.2012.03.006 ↗
42. I. Jacobs: IEEE Trans. Magn., 1985, vol. 21, pp. 1306–9.10.1109/TMAG.1985.1063897 ↗
43. Gul Rahman, In Gee Kim, H. K. D. H. Bhadeshia, and Arthur J. Freeman: Phys. Rev. B, 2010, vol. 81, p. 184423.10.1103/PhysRevB.81.184423 ↗
44. Masatoshi Onoue, Giancarlo Trimarchi, Arthur J. Freeman, Voicu Popescu, and Marc R. Matsen: J. Appl. Phys., 2015, vol. 117, p. 043912.10.1063/1.4905912 ↗