Deformation Behavior of Cementite in Deformed High Carbon Steel Observed by X-ray Diffraction with Synchrotron Radiation
Source abstract
Abstract
The deformation behavior of cementite in drawn pearlitic steel and spheroidal cementite steel, which have hypereutectoid composition, was investigated by X-ray diffraction using synchrotron radiation. A detailed analysis of diffraction peak profiles reveals that the deformation behavior strongly depends on the shape of cementite in steel. The unit cell volume of the cementite in the drawn pearlitic steel compressively and elastically deforms by 1.5 to 2 pct of the initial volume at the early stage of drawing, whereas that in the drawn spheroidal cementite steel is compressed by 1 pct of the initial volume even at a large true strain. The cementite in the drawn pearlitic steel fragments into small pieces with increasing the true strain, and these pieces change to amorphous cementite. The dislocation densities of the cementite in the drawn pearlitic steel and in the drawn spheroidal cementite steel are estimated to be ~1013/m2 before drawing and ~1014/m2 after drawing. Although the large strain is induced in the cementite by drawing, the maximum strain energy in the cementite is too small to contribute to the dissolution of the cementite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. M. Zelin: Acta Mater., 2002, vol. 50, pp. 4431–4447.10.1016/S1359-6454(02)00281-1 ↗
2. Y. Ivanisenko, W. Lojkowski, R.Z. Valiev, H.-J. Fecht: Acta Materialia, 2003, vol. 51, pp. 5555–5570.10.1016/S1359-6454(03)00419-1 ↗
3. X. Zhang, A. Godfrey, N. Hansen, X. Huang, W. Liu, Q. Liu: Mater. Charact., 2010, vol. 61, pp. 65-72.10.1016/j.matchar.2009.10.007 ↗
4. X. Zhang, A. Godfrey, N. Hansen, X. Huang: Acta Materialia, 2013, vol. 61, pp. 4898–4909.10.1016/j.actamat.2013.04.057 ↗
5. A.V. Korznikov, Y.V. Ivanisenko, D.V. Laptionok, I.M. Safarov, V.P. Pilyugin, R.Z. Valiev: Nanostructured Mater., 1994, vol. 4, pp. 159-167.10.1016/0965-9773(94)90075-2 ↗
6. J. Languilaume, G. Kapelski, B. Baudelet: Acta Mater., 1997, vol. 45, pp. 1201-1212.10.1016/S1359-6454(96)00216-9 ↗
7. H.G. Read, W.T. Reynolds Jr, K. Hono, T. Tarui: Scripta Mater., 1997, vol. 37, pp. 1221-1230.10.1016/S1359-6462(97)00223-6 ↗
8. X. Sauvage, J. Copreaux, F. Danoix, D. Blavette: Phil. Mag. A, 2000, vol. 80, pp. 781-796.10.1080/01418610008212082 ↗
9. K. Hono, M. Ohnuma, M. Murayama, S. Nishida, A. Yoshie, T. Takahashi: Scripta Mater., 2001, vol. 44, pp. 977-983.10.1016/S1359-6462(00)00690-4 ↗
10. N. Min, W. Li, H. Li, X. Jin: J. Mater. Sci. Technol., 2010, vol. 26, pp. 776-782.10.1016/S1005-0302(10)60123-5 ↗
11. Y.J. Li, P. Choi, C. Borchers, S. Westerkamp, S. Goto, D. Raabe, R. Kirchheim: Acta Mater., 2011, vol. 59, pp. 3965-3977.10.1016/j.actamat.2011.03.022 ↗
12. W.J. Nam, C.M. Bae, S.J. Oh, S.J. Kwon: Scripta Mater., 2000, vol. 42, pp. 457-463.10.1016/S1359-6462(99)00372-3 ↗
13. V.G. Gavriljuk: Mater .Sci. Eng. A, 2003, vol. 345, pp. 81-89.10.1016/S0921-5093(02)00358-1 ↗
14. A. Taniyama, T. Takayama, M. Arai, T. Hamada: Scripta Mater., 2004, vol. 51, pp. 53-58.10.1016/j.scriptamat.2004.03.018 ↗
15. S. Djaziri, Y. Li, G. A. Nematollahi, B. Grabowski, S. Goto, C. Kirchlechner, A. Kostka, S. Doyle, J. Neugebauer, D. Raabe, G. Dehm: Adv. Mater., 2016, vol. 28, pp. 7753–7757.10.1002/adma.201601526 ↗
16. C. Borchers, T. Al-Kassab, S. Goto, R. Kirchheim: Mater .Sci. Eng. A, 2009, vol. 502, pp. 131-138.10.1016/j.msea.2008.10.018 ↗
17. F. Fang, Y. Zhao, P. Liu, L. Zhou, X.J. Hu, X. Zhou, Z.H. Xie: Mater. Sci. Eng. A, 2014, vol. 608, pp. 11-15.10.1016/j.msea.2014.04.050 ↗
18. L. Zhou, F. Fang, X. Zhou, Y. Tu, Z. Xie, J. Jiang: Scripta Materialia, 2016, vol. 120, 5–8.10.1016/j.scriptamat.2016.04.002 ↗
19. A. Taniyama, D. Shindo, T. Oikawa: J. Electron. Microsc., 1996, vol. 45, pp. 232-235.10.1093/oxfordjournals.jmicro.a023437 ↗
20. M. Nikolussi, S.L. Shang, T. Gressmann, A. Leineweber, E.J. Mittemeijer, Y. Wang, Z.-K. Liu: Scripta Mater., 2008, vol. 59, pp. 814-817.10.1016/j.scriptamat.2008.06.015 ↗
21. J. Alkorta, J.G. Sevillano: J. Mater. Res., 2012, vol. 27, pp. 45-52.10.1557/jmr.2011.284 ↗
22. A. Leineweber, S.L. Shang, Z.K. Liu: J. Alloys Compd., 2015, vol. 633, pp. 390-394.10.1016/j.jallcom.2015.02.040 ↗
23. G.K. Williamson, R.E. Smallman: Phil. Mag., 1956, vol. 1, pp. 34-46.10.1080/14786435608238074 ↗
24. G.K. Williamson, W.H. Hall: Acta Metall., 1953, vol. 1, pp. 22-31.10.1016/0001-6160(53)90006-6 ↗
25. T. Ungár, G. Ribárik, L. Balogh, A.A. Salem, S.L. Semiatin, G.B.M. Vaughan, Scripta Mater., 2010, vol. 63, 69–72.10.1016/j.scriptamat.2010.03.016 ↗
26. A. Borbély, T. Ungár: C. R. Physique, 2012, vol. 13, p.p. 293–306.10.1016/j.crhy.2011.12.004 ↗
27. A. Mussi, P. Cordier, S. Ghosh, N. Garvik, B. C. Nzogang, Ph. Carrez, S. Garruchet: Phil. Mag., 2016, vol. 96, p.p. 1773–1789.10.1080/14786435.2016.1177670 ↗
28. B. W. Koo, Y. J. Chang, S. P. Hong, C. S. Kang, S. W. Jeong, W. J. Nam, I. J. Park, Y. K. Lee, K. H. Oh, Y. W. Kim: Scripta Mater., 2014, vol. 82, 25–28.10.1016/j.scriptamat.2014.03.013 ↗