journal article·2017-07

Study of Aging-Induced Degradation of Fracture Resistance of Alloy 617 Toward High-Temperature Applications

Aditya Narayan Singh, A. Moitra, Pragna Bhaskar, G. Sasikala, Arup Dasgupta, A. K. Bhaduri

Publisher page

Abstract

For the Alloy 617, the effect of aging on the fracture energy degradation has been investigated after aging for different time periods at 1023 K (750 °C). A sharp reduction in impact energy (by ~55 pct vis-a-vis the as-received material) after 1000 hours of aging, as evaluated from room-temperature Charpy impact tests, has been observed. Further aging up to 10,000 hours has led to a degradation of fracture energy up to ~78 pct. Fractographic examinations using scanning electron microscopy (SEM) have revealed a change in fracture mode from fibrous-ductile for the un-aged material to intergranular mode for the aged one. The extent of intergranular fracture increases with the increasing aging time, indicating a tendency of the material to undergo grain boundary embrittlement over long-term aging. Analysis of the transmission electron microscopy (TEM) micrographs along with selected area diffraction (SAD) patterns for the samples aged at 10,000 hours revealed finely dispersed γ′ precipitates of size 30 to 40 nm, rich in Al and Ti, along with extensive precipitation of M23C6 at the grain boundaries. In addition, the presence of Ni3Si of size in the range of 110 to 120 nm also has been noticed. The extensive precipitation of M23C6 at the grain boundaries have been considered as a major reason for aging-induced embrittlement of this material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. D. Tytko, P.-P. Choi, J. Klöwer, A. Kostka, G. Inden, and D. Raabe: Acta Mater. 2012, vol. 60, pp. 1731–40.10.1016/j.actamat.2011.11.020 ↗
2. J. Bugge, S. Kjaer, and R. Blum, Energy, 2006, vol. 31, pp. 1437–45.10.1016/j.energy.2005.05.025 ↗
3. P.J. Ennis and A. Czyrska-Filemonowicz, Sadhana, 2003, vol. 28, pp. 709–30.10.1007/BF02706455 ↗
4. C.M. Rae and R.C. Reed, Acta Mater. 2001, vol. 49, pp. 4113–25.10.1016/S1359-6454(01)00265-8 ↗
5. T.S. Jo, S.-H. Kim, D.-G. Kim, J.Y. Park and Y. Do Kim, Met. Mater. Int., 2008, vol. 14, pp. 739–43.10.3365/met.mat.2008.12.739 ↗
6. R. Moshtaghin and S. Asgari, Mater. Des., 2003, vol. 24, pp. 325–30.10.1016/S0261-3069(03)00061-X ↗
7. P. Caron and T. Khan, Aerosp. Sci. Technol., 1999, vol. 3, pp. 513–23.10.1016/S1270-9638(99)00108-X ↗
8. R. Viswanathan: Advances in Materials Technology for Fossil Power Plants: Proceedings from the Fifth International Conference, October 3–5, 2007, Marco Island, Florida, USA. (ASM International, 2008).
9. W.L. Mankins, J.C. Hosier, and T.H. Bassford: Metall. Trans. B, 1974, vol. 5, pp. 2579–90.10.1007/BF02643879 ↗
10. R. Viswanathan, J. Henry, J. Tanzosh, G. Stanko, J. Shingledecker, B. Vitalis, and R. Purgert: J. Mater. Eng. Perform., 2005, vol. 14, pp. 281–92.10.1361/10599490524039 ↗
11. H. Kirchhofer, F. Schubert, and H. Nickel, Nucl. Technol., 1984, vol. 66, pp. 139–48.10.13182/NT84-A33462 ↗
12. O.F. Kimball, G.Y. Lai, and G.H. Reynolds, Metall. Trans. A, 1976, vol. 7, pp. 1951–2.10.1007/BF02659828 ↗
13. S. Schlegel, S. Hopkins, E. Young, J. Cole, T. Lillo, and M. Frary, Metall. Mater. Trans. A, 2009, vol. 40, pp. 2812–23.10.1007/s11661-009-0027-7 ↗
14. J. Wang, L. Zhou, L. Sheng, and J. Guo, Mater. Des., 2012, vol. 39, pp. 55–62.10.1016/j.matdes.2012.02.020 ↗
15. J. Klöwer, R. Husemann, and M. Bader, Procedia Eng., 2013, vol. 55, pp. 226–31.10.1016/j.proeng.2013.03.247 ↗
16. M.H. Hasan: Effects of mechanical and metallurgical variables on creep, fracture toughness and crack growth behavior of Alloy 617. (2009).
17. J.K. Benz and R.N. Wright: Fatigue and Creep Crack Propagation Behaviour of Alloy 617 in the Annealed and Aged Conditions. (Idaho National Laboratory (INL), 2013).
18. W. Ren and R. Swindeman, J. Pressure Vessel Technol., 2009, vol. 131, pp. 044002.10.1115/1.3121522 ↗
19. Y. Guo, B. Wang, and S. Hou, Acta. Metall. Sin. Engl., 2013, vol. 26, pp. 307–12.10.1007/s40195-012-0249-3 ↗
20. R.K. Nanstad, M.A. Sokolov, and X.F. Chen: Energy Technology 2012: Carbon Dioxide Management and Other Technologies, pp. 341–56.10.1002/9781118365038.ch41 ↗
21. ASTM E-23c-12c: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials, ASTM International, West Conshohocken, 2013, pp. 1–25.
22. ASTM E384 –11ε1: Standard Test Method for Knoop and Vickers Hardness of Materials, ASTM International,West Conshohocken, 2011, pp. 1–43.
23. G. Yan, Z.-b. Zhang, R.-c. Zhou, S.-f. Hou and B.-h. Wang, T. Nonferr: Metal. Soc., 2015, vol. 25, pp. 1106–1113.
24. T. Horiuchi and N. Satoh: e. J. Adv. Maint., 2013, vol. 5, pp. 165–74.
25. Y. Zhou, Z. Zhang, Z. Zhao, and Q. Zhong, Rare Metals, 2012, vol. 31, pp. 221–6.10.1007/s12598-012-0495-6 ↗
26. R.N. Wright: Idaho National Laboratory (United States). Funding organization: DOE-NE (United States), 2006.
27. L. Tan, Y. Yang, R. Nanstad, and J. Busby: J. Phase. Equilib. Diffus., 2014, vol. 35, pp. 524–9.10.1007/s11669-014-0312-z ↗
28. A. Moitra, P. Sreenivasan, S. Mannan, and V. Singh: Metall. Mater. Trans. A, 2005, vol. 36, pp. 2957–65.10.1007/s11661-005-0069-4 ↗
29. S. Sathyanarayanan, J. Basu, A. Moitra, G. Sasikala, and V. Singh, Metall. Mater. Trans. A 2013, vol. 44, pp. 2141–55.10.1007/s11661-012-1510-0 ↗
30. Y. Yamamoto, M. Takeyama, Z.P. Lu, C. T. Liu, N.D. Evans, P.J. Maziasz and M.P. Brady, Intermetallics, 2008, vol. 16, pp. 453–62.10.1016/j.intermet.2007.12.005 ↗
31. R. Krishna, S.V. Hainsworth, H.V. Atkinson and A. Strang, Mater. Sci. Technol., 2010, vol. 26, pp. 797–802.10.1179/026708309X12584564052094 ↗
32. P. Peralta, R. Dickerson, N. Dellan, K. Komandur, and M. Jameel, J. Eng. Mater. Technol. 2005, vol. 127, pp. 23–32.10.1115/1.1836768 ↗
33. J. Wright and R. Wright: Idaho National Laboratory (INL), 2013.
34. B.C. Yan, J. Zhang, and L.H. Lou, Mater. Sci. Eng. A, 2008, vol. 474, pp. 39–47.10.1016/j.msea.2007.05.082 ↗
35. T. Tokunaga, K. Nishio, H. Ohtani, and M. Hasebe, Mater. Ttrans. 2003, vol. 44, pp. 1651–4.10.2320/matertrans.44.1651 ↗