journal article·2017-03

Effect of Microstructures on Fatigue Crack Growth Behavior of Friction Stir Processed NiAl Bronze Alloy

Yuting Lv, Yang Ding, Yuanfei Han, Laizhi Wu, Liqiang Wang, Weijie Lu

Publisher page

Abstract

Friction stir processed (FSPed) NAB alloy exhibits inhomogeneous microstructures that can be divided into three subregions from the top surface to the bottom according to α phase morphologies: Widmanstatten α subregion, banded α colonies, and stream-like α colonies. In this study, a constant stress intensity range (ΔK) was used for each sample to study the effect of microstructures on the fatigue crack growth rate (FCGR) of FSPed NAB alloy. The results show that α phase in banded and stream-like α colonies experiences completely dynamic recrystallization and forms equiaxed α grains during FSP. The FCGR of FSPed NAB alloy continuously decreases from the top surface to the bottom. In the subregion with stream-like α colonies, the alloy containing a higher content of equiaxed α grains and fine κ iv phase, and less retained β (β′) phase exhibits the best FCG resistance. The equiaxed α grains deflect the main crack and increase crack tortuosity effect, which make a main contribution to FCG resistance of FSPed NAB alloy, while martensite β′ phase produced during FSP accelerates its fatigue crack growth. Compared to matrix alloy, FSPed NAB alloy exhibits better FCG resistance only at high ΔK levels. At low ΔK levels, the crack deflection effect caused by coarser κ phase in the matrix alloy obviously improves its FCG resistance. With the increasing ΔK, the aforementioned crack deflection effect gradually diminishes and fatigue crack prefers to propagate in a flat way, resulting in higher FCGR of matrix alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Science · Nanoporous metals and alloys · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Z. Wu, Y.F. Cheng, L. Liu, W.J. Lv, W.B. Hu: Corros. Sci., 2015, vol. 98, pp. 260-270.10.1016/j.corsci.2015.05.037 ↗
2. K. Oh-ishi and T.R. McNelley: Metall. Mater. Trans A., 2005, vol. 36A, pp. 1575-1585.10.1007/s11661-005-0249-2 ↗
3. D.R. Ni, B.L. Xiao, Z.Y. Ma, Y.X. Qiao, Y.G. Zheng: Corros. Sci., 2010, vol. 52(5), pp. 1610-1617.10.1016/j.corsci.2010.02.026 ↗
4. A. Jahanafrooz, F. Hasan, G.W. Lorrmer and N. Ridley: Metall. Mater. Trans A., 1982, vol. 34A, pp. 1951-1956.
5. Q.N. Song, Y.G. Zheng, D.R. Ni, Z.Y. Ma: Corros. Sci., 2014, vol. 92, pp. 95-103.10.1016/j.corsci.2014.11.039 ↗
6. X.Y. Xu, H. Wang, Y.T. Lv, W.J. Lu, G.A. Sun: Metall. Mater. Trans. A., 2016, vol. 47(5), pp. 2081-2092.10.1007/s11661-016-3379-9 ↗
7. S. Fonlupt, B. Bayle, D. Delafosse, J.L. Heuze: Corros. Sci., 2005, vol. 47(11), pp. 2792-2806.10.1016/j.corsci.2004.09.025 ↗
8. X.Y. Xu, Y.T. Lv, M. Hu, D. Xiong, L.F. Zhang, L.Q. Wang, W.J. Lu: Int. J. Fatigue, 2016, vol. 82, pp. 579-587.10.1016/j.ijfatigue.2015.09.014 ↗
9. A. Chakrabarti, A. Sarkar, T. Saravanan, A. Nagesha, R. Sandhya and T. Jayakumar: Procedia Eng., 2014, vol. 86, pp.103-110.10.1016/j.proeng.2014.11.017 ↗
10. Z.B. Qin, Z. Wu, X.S. Zen, Q. Luo, L. Liu, W.J. Lu, W.B. Hu: Corrosion, 2016, vol. 72(10), pp. 1269-1280.10.5006/2097 ↗
11. C.H. Tang, F.T. Cheng, H.C. Man: Surf. Coat. Tech., 2004, vol. 182, pp. 300–307.10.1016/j.surfcoat.2003.08.048 ↗
12. C.H. Tang, F.T. Cheng, H.C. Man: Mater. Sci. Eng. A, 2004, vol. 373, pp. 195-203.10.1016/j.msea.2004.01.016 ↗
13. J.Q. Su, S. Swaminathan, S.K. Menon, T.R. McNelley: Metall. Mater. Trans. A, 2011, vol. 42(8), pp. 2420-2430.10.1007/s11661-011-0638-7 ↗
14. K. Oh-ishi and T.R. McNelley: Metall. Mater. Trans A, 2004. Vol. 35A pp. 2951-2960.10.1007/s11661-004-0242-1 ↗
15. S. Hanke, A. Fischer, M. Beyer, J. D. Santos: Wear, 2011, vol. 273(1), pp. 32-37.10.1016/j.wear.2011.06.002 ↗
16. R.S. Mishra, Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50(1-2), pp. 1-78.10.1016/j.mser.2005.07.001 ↗
17. W.A. Palko, R.S. Fielder, P.F. Young: Mater. Sci. Forum, 2003, vol. 426-432, pp. 2909-2914.10.4028/www.scientific.net/MSF.426-432.2909 ↗
18. D.R. Ni, P. Xue, Z.Y. Ma: Metall. Mater. Trans A, 2011, vol. 42(8). pp. 2125-2135.10.1007/s11661-011-0628-9 ↗
19. D.R. Ni, P. Xue, D. Wang, B.L. Xiao, Z.Y. Ma: Mater. Sci. Eng. A, 2009, vol. 524(1-2), pp. 119-128.10.1016/j.msea.2009.06.013 ↗
20. S. Swaminathan, K. Oh-Ishi, A.P. Zhilyaev, C.B. Fuller, B. London, M.W. Mahoney, T.R. McNelley: Metall. Mater. Trans A, 2009, vol. 1(3), pp. 631-640.10.1007/s11661-009-0140-7 ↗
21. R. Nandan, T. Debroy, H. Bhadeshia: Prog. Mater. Sci., 2008, vol. 53(6). pp. 980-1023.10.1016/j.pmatsci.2008.05.001 ↗
22. Y.T. Lv, L.Q. Wang, X.Y. Xu, W.J. Lu: Metals, 2015, vol. 5(3). pp. 1695-1703.10.3390/met5031695 ↗
23. Y.T. Lv, L.Q. Wang, Y.F. Han, X.Y. Xu, W.J. Lu: Mater. Sci. Eng. A, 2015, vol. 643, pp. 17-24.10.1016/j.msea.2015.06.078 ↗
24. Y.T. Lv, L.Q. Wang, X.Y. Xu, Y.F. Han, W.J. Lu: Mater. Trans., 2015, vol. 56(9), pp. 1523-1529.10.2320/matertrans.M2015125 ↗
25. Y.L. Wang, Q.L. Pan, L.L. Wei, B. Li, Y. Wang: Mater. Des., (2014) vol. 55, pp. 857-863.10.1016/j.matdes.2013.09.063 ↗
26. J.Z. Dong, F.G. Li, C.P. Wang: Mater. Sci. Eng. A, 2013, vol. 580, pp. 105-113.10.1016/j.msea.2013.05.032 ↗
27. Y.T. Lv, M. Hu, L.Q. Wang, X.Y. Xu, Y.F. Han, W.J. Lu: J. Mater. Res., 2015, vol. 30(20), pp. 3041-3048.10.1557/jmr.2015.282 ↗
28. A.J. F. Hansan, G.W. Lorimer and N. Ridley: Metall. Mater. Trans A, 1982. vol. 13A, pp. 1337-1345.10.1007/BF02642870 ↗
29. L.P. Borrego, J.M. Costa, S. Silva, J.M. Ferreira: Inter. J. Fatigue, 2004, vol. 26(12), pp. 1321-1331.10.1016/j.ijfatigue.2004.04.004 ↗
30. X.H. Shi, W.D. Zeng, C.L. Shi, H.J. Wang, Z.Q. Jia: Mater. Sci. Eng. A, (2015) vol. 621, pp. 252-258.10.1016/j.msea.2014.09.112 ↗
31. X.H. Shi, W.D. Zeng, C.L. Shi, H.J. Wang, Z.Q. Jia: Mater. Sci. Eng. A, 2015, vol. 621, pp. 143-148.10.1016/j.msea.2014.10.022 ↗
32. G. Lütjering, J. Albrecht, C. Sauer, T. Krull: Mater. Sci. Eng. A, 2007, vol. 468-470, pp. 201-209.10.1016/j.msea.2006.07.168 ↗
33. X.H. Shi, W.D. Zeng, S.K. Xue, Z.Q Jia: J. Alloy. Compd, 2015, vol. 631, pp. 340-349.10.1016/j.jallcom.2015.01.077 ↗
34. P.S. Prevey, D.J. Hornbach, D.N. Jayaraman: Mater. Sci. Forum, 2007, vol. 539-543, pp. 3807-3813.10.4028/www.scientific.net/MSF.539-543.3807 ↗
35. . Yang, B.L. Xiao, D. Wang, Z.Y. Ma: Mater. Sci. Eng. A, 2010, vol. 527, pp. 708-714.10.1016/j.msea.2009.09.044 ↗