journal article·2016-11

Nano-precipitation Strengthened G91 by Thermo-mechanical Treatment Optimization

J. Vivas, C. Celada-Casero, D. San Martín, M. Serrano, E. Urones-Garrote, P. Adeva, M. M. Aranda, C. Capdevila

Publisher page

Abstract

The increase of thermal efficiency in power plants has been the main driving force to develop Ferritic/Martensitic steels for structural applications capable of operating at 923 K (650 °C) and higher. It has been clarified in previous works that nano-sized precipitates and its distribution are the key factors controlling the stability of the microstructure at high operating temperatures. Based on the science of precipitate strengthening, the aim of this work is to optimize the thermo-mechanical treatment in a commercial creep-resistant steel (G91) to achieve a microstructure where MX precipitates present a suitable size and distribution. The alternative processing route proposed here allows gaining an increase up to 40 pct in yield strength at 973 K (700 °C) compared to the commercial steel. The results of small punch test carried out at room temperature showed that the improvement in strength was obtained without loss of ductility. This fact was attributed to a finer and more homogeneous dispersion of MX precipitates in comparison to the commercial steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Fusion materials and technologies · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. S.J. Zinkle, G.S. Was: Acta Mater., 2013, vol. 61, pp. 735-758.10.1016/j.actamat.2012.11.004 ↗
2. R.L. Klueh: High-Chromium Ferritic and Martensitic Steels for Nuclear Applications. American Society for Testing and Materials, New York, 2001.10.1520/MONO3-EB ↗
3. F. Abe: Creep Resistant Steel. Woodhead Publishing, Cambridge, 2008.10.1533/9781845694012 ↗
4. R.L. Klueh, A.T. Nelson: J. Nucl. Mater., 2007, vol. 371, pp. 37-52.10.1016/j.jnucmat.2007.05.005 ↗
5. L. Helis, Y. Toda, T. Hara, H. Miyazaki, F. Abe: Mater. Sci. Eng. A, 2009, vol. 510–511, pp. 88-94.10.1016/j.msea.2008.04.131 ↗
6. R.L. Klueh, N. Hashimoto, P.J. Maziasz: J. Nucl. Mater., 2007, vol. 367–370, pp. 48-53.10.1016/j.jnucmat.2007.03.001 ↗
7. F. Abe, M. Taneike, K. Sawada: Int. J. Press. Vessels Pip., 2007, vol. 84, pp. 3-12.10.1016/j.ijpvp.2006.09.003 ↗
8. R.L. Klueh, N. Hashimoto, P.J. Maziasz: Scr. Mater., 2005, vol. 53, pp. 275-280.10.1016/j.scriptamat.2005.04.019 ↗
9. O. Prat, J. García, D. Rojas, J.P. Sanhueza, C. Camurri: Mater. Chem. Phys., 2014, vol. 143, pp. 754-764.10.1016/j.matchemphys.2013.10.010 ↗
10. F. Abe, T. Horiuchi, M. Taneike, K. Sawada: Mater. Sci. Eng. A, 2004, vol. 378, pp. 299-303.10.1016/j.msea.2003.11.073 ↗
11. A. Kabadwal, M. Tamura, K. Shinozuka, H. Esaka: Metall. Mater. Trans. A, 2009, vol. 41, pp. 364-379.
12. L. Tan, D.T. Hoelzer, J.T. Busby, M.A. Sokolov, R.L. Klueh: J. Nucl. Mater., 2012, vol. 422, pp. 45-50.10.1016/j.jnucmat.2011.12.011 ↗
13. S. Hollner, B. Fournier, J. Le Pendu, T. Cozzika, I. Tournié, J.C. Brachet, A. Pineau: J. Nucl. Mater., 2010, vol. 405, pp. 101-108.10.1016/j.jnucmat.2010.07.034 ↗
14. L. Tan, Y. Yang, J.T. Busby: J. Nucl. Mater., 2013, vol. 442, pp. S13-S17.10.1016/j.jnucmat.2012.10.015 ↗
15. S. Li, Z. Eliniyaz, F. Sun, Y. Shen, L. Zhang, A. Shan: Mater. Sci. Eng. A, 2013, vol. 559, pp. 882-888.10.1016/j.msea.2012.09.040 ↗
16. L. Tan, J.T. Busby, P.J. Maziasz, Y. Yamamoto: J. Nucl. Mater., 2013, vol. 441, pp. 713-717.10.1016/j.jnucmat.2013.01.323 ↗
17. J.H. Kim, J.H. Baek, S.H. Kim, C.B. Lee, K.S. Na, S.J. Kim: Ann. Nucl. Energy, 2011, vol. 38, pp. 2397-2403.10.1016/j.anucene.2011.07.027 ↗
18. W. Zhang, Q. Su, W. Yan, W. Wang, R.D.K. Misra, Y. Shan, K. Yang: Mater. Sci. Eng. A, 2015, vol. 639, pp. 173-180.10.1016/j.msea.2015.04.101 ↗
19. J. Hoffmann, M. Rieth, L. Commin, P. Fernández, M. Roldán: Nucl. Mater. Energy, 2016, vol. 6, pp. 12-17.10.1016/j.nme.2015.12.001 ↗
20. F. Abe: Mater. Sci. Eng. A, 2001, vol. 319–321, pp. 770-773.10.1016/S0921-5093(00)02002-5 ↗
21. M. Taneike, F. Abe, K. Sawada: Nature, 2003, vol. 424, pp. 294-296.10.1038/nature01740 ↗
22. M. Tamura, H. Sakasegawa, A. Kohyama, H. Esaka, K. Shinozuka: J. Nucl. Mater., 2003, vol. 321, pp. 288-293.10.1016/S0022-3115(03)00281-2 ↗
23. R.L. Klueh: Elevated-Temperature Ferritic and Martensitic Steels and Their Application to Future Nuclear Reactor. Oak Ridge National Laboratory, Oak Ridge, TN, 2004.10.2172/885938 ↗
24. M. Yoshino, Y. Mishima, Y. Toda, H. Kushima, K. Sawada, and K. Kimura: ECCC Creep Conference. London, 12–14 September 2005.
25. Y.Z. Shen, S.H. Kim, C.H. Han, H.D. Cho, W.S. Ryu: J. Nucl. Mater., 2009, vol. 384, pp. 48-55.10.1016/j.jnucmat.2008.10.005 ↗
26. C. Wang, M. Wang, J. Shi, W. Hui, H. Do9ng: Scr. Mater., 2008, vol. 58, pp. 492-495.10.1016/j.scriptamat.2007.10.053 ↗
27. Z.-J. Luo, J.-C. Shen, H. Su, Y.-H. Ding, C.-F. Yang, X. Zhu: J. Iron. Steel Res. Int., 2010, vol. 17, pp. 40-48.10.1016/S1006-706X(10)60168-9 ↗