journal article·2016-11

On the Role of Alloy Composition and Sintering Parameters in the Bimodal Grain Size Distribution and Mechanical Properties of ODS Ferritic Steels

Andrea García-Junceda, Mónica Campos, Nerea García-Rodríguez, José Manuel Torralba

Publisher page

Abstract

A sintered 14Cr-5Al-3W oxide dispersion strengthened steel was produced by mechanical alloying and consolidated by field-assisted hot pressing. First, a nanostructured powder was developed thanks to the high-energy milling used for introducing 0.4Ti-0.25Y2O3-0.6ZrO2 into the prealloyed Fe-Cr-Al-W powder, and then the processed powders were consolidated under a low diffusive technique to better retain the microstructure inherited from milling. The effect of the addition of zirconia and of the pressure applied during sintering on the final bimodal grain microstructure and mechanical properties is assessed. Both parameters are responsible for the refinement of the microstructure by increasing the volume fraction of the ultrafine grains (0 to 400 nm), leading to an enhancement of the mechanical properties, such as the microhardness and tensile strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. C.C. Koch: Scripta Mater., 2003, vol. 49, Issue 7, pp. 657-62.10.1016/S1359-6462(03)00394-4 ↗
2. C. Menapace, I. Lonardelli, M. Tait and A. Molinari: Mater. Sci. Eng. A, 2009, vol. 517, issues 1–2, pp. 1-7.10.1016/j.msea.2009.03.021 ↗
3. B. Srinivasarao, K. Oh-ishi, T. Ohkubo and K. Hono, Acta Mater., 2009, vol. 57, issue 11, pp. 3277-86.10.1016/j.actamat.2009.03.034 ↗
4. G. Ji, F. Bernard, S. Launois and T. Grosdidier: Mater. Sci. Eng. A, 2013, vol. 559, pp. 566-73.10.1016/j.msea.2012.08.142 ↗
5. N. Tsuchida, H. Masuda, Y. Harada, K. Fukaura, Y. Tomota and K. Nagai: Mater. Sci. Eng. A, 2008, vol. 488, pp. 446-52.10.1016/j.msea.2007.11.047 ↗
6. R. Song, D. Ponge, D. Raabe, J.G. Speer, and D.K. Matlock: Mater. Sci. Eng. A, 2006, vol. 441, pp. 1–17.10.1016/j.msea.2006.08.095 ↗
7. E. Ma: Scr. Mater., 2003, vol. 49, issue 7, pp. 663-68.10.1016/S1359-6462(03)00396-8 ↗
8. Z. Dapeng, L. Yong, L. Feng, W. Yuren, Z. Liujie and D. Yuhai: Mater. Lett., 2011, vol. 65, issue 11, pp. 1672-74.10.1016/j.matlet.2011.02.064 ↗
9. I. Hilger, F. Bergner and T. Weissgärber: J. Am. Ceramic. Soc, 2015, vol. 98, pp. 3576-81.10.1111/jace.13833 ↗
10. X. Boulnat, M. Perez, D. Fabregue, T. Douillard, M.H. Mathon and Y. De Carlan: Met. Mat. Trans. A, 2014, vol. 45, pp. 1485-97.10.1007/s11661-013-2107-y ↗
11. N. Sallez, X. Boulnat, A. Borbély, J.L. Béchade, D. Fabrègue, M. Perez, Y. de Carlan, L. Hennet, C. Mocuta, D. Thiaudière and Y. Bréchet: Acta Mater., 2015, vol. 87, pp. 377-89.10.1016/j.actamat.2014.11.051 ↗
12. M.A. Auger, T. Leguey, A. Muñoz, M.A. Monge, V. de Castro, P. Fernández, G. Garcés and R. Pareja: J. Nucl. Mater., 2011, vol. 417, issues 1–3, pp. 213-16.10.1016/j.jnucmat.2010.12.060 ↗
13. P. Unifantowicz, Z. Oksiuta, P. Olier, Y. de Carlan and N. Baluc: Fusion Eng. Design, 2011, vol. 86, issues 9–11, pp. 2413-16.10.1016/j.fusengdes.2011.01.022 ↗
14. A. García-Junceda, M. Hernández-Mayoral and M. Serrano: Mat. Sci. Eng. A., 2012, vol. 556, pp. 696-703.10.1016/j.msea.2012.07.051 ↗
15. P. Franke, C. Heintze, F. Bergner and T. Weissgärber: MP Mater. Testing, 2010, vol. 52, pp. 133-138.10.3139/120.110115 ↗
16. T. Narita, S. Ukai, S. Ohtsuka and M. Inoue: J. Nucl. Mater., 2011, vol. 417, pp. 158-61.10.1016/j.jnucmat.2011.01.060 ↗
17. M. K. Miller and C. M. Parish: Mater. Sci. Tech., 2011, vol. 27, pp. 729-734.10.1179/1743284710Y.0000000039 ↗
18. G. Müller, A. Heinzel, J. Konys, G. Schumacher, A. Weisenburger, F. Zimmermann, V. Engelko, A. Rusanov, and V. Markov: J. Nucl. Mat., 2004, vol. 335, issue 2, pp. 163-68.10.1016/j.jnucmat.2004.07.010 ↗
19. J.H. Lee, R. Kasada, A. Kimura, T. Okuda, M. Inoue, S. Ukai, S. Ohnuki, T. Fujisawa and F. Abe: J. Nucl. Mater., 2011, vol. 417, issues 1–3, pp. 1225-28.10.1016/j.jnucmat.2010.12.279 ↗
20. R. Kasada, N. Toda, K. Yutani, H.S. Cho, H. Kishimoto and A. Kimura: J. Nucl. Mater., 2007, vol. 367–370, issue 1, pp. 222-28.10.1016/j.jnucmat.2007.03.141 ↗
21. A. Yabuuchi, M. Maekawa and A. Kawasuso: J. Nucl. Mater., 2012, vol. 430, issues 1–3, pp: 190-93.10.1016/j.jnucmat.2012.07.005 ↗
22. R. Gao, T. Zhang, X.P. Wang, Q.F. Fang and C.S. Liu: J. Nucl. Mater., 2014, vol. 444, issues 1–3, pp. 462-68.10.1016/j.jnucmat.2013.10.038 ↗
23. S. Takaya, T. Furukawa, G. Müller, A. Heinzel, A. Jianu, A. Weisenburger, K. Aoto, M. Inoue, T. Okuda, F. Abe, S. Ohnuki, T. Fujisawa and A. Kimura: J. Nucl. Mater., 2012, vol. 428, issues 1–3, pp. 125-30.10.1016/j.jnucmat.2011.06.046 ↗
24. C.Z. Yu, H. Oka, N. Hashimoto and S. Ohnuki, 2011, vol. 417, pp. 286–88.10.1016/j.jnucmat.2011.02.037 ↗
25. R. Rahmanifard, H. Farhangi and A.J. Novinrooz: J. Alloys Compd., 2015, vol. 622, pp. 948–52.10.1016/j.jallcom.2014.11.018 ↗
26. A. García-Junceda, N. García-Rodríguez, M. Campos, M. Cartón-Cordero and J.M. Torralba: J. Am. Ceram. Soc., 2015, vol. 98, pp 3582–87.10.1111/jace.13691 ↗
27. J. Isselin, R. Kasada, A. Kimura, T. Okuda, M. Inoue, S. Ukai, S. Ohnuki, T. Fujisawa and F. Abe: Mater. Trans., 2010, vol. 51, pp. 1011-15.10.2320/matertrans.MBW200923 ↗
28. R. Kasada, N. Toda, K. Yutani, H.S. Cho, H. Kishimoto and A. Kimura: J. Nucl. Mater., 2007, Vol. 367–370, pp. 222-28.10.1016/j.jnucmat.2007.03.141 ↗
29. P. Dou, A. Kimura, R. Kasada, T. Okuda, M. Inoue, S. Ukai, S.Ohnuki, T. Fujisawa, F. Abe: J. Nucl. Mater., 2014, vol. 444, issues 1–3, pp. 441-53.10.1016/j.jnucmat.2013.10.028 ↗
30. P. Scherrer: Nachrichten von der Gesellschaft der Wissenschaften zu Göttingen, Mathematisch-Physikalische Klasse, 1918, vol. 2, pp. 98-100.
31. A. García-Junceda, L. Acebo, and J.M. Torralba: Metall. Mater. Trans. A., 2015, vol. 46, issue 7, pp. 3192-98.10.1007/s11661-015-2919-z ↗
32. CEN Workshop Agreement. Small Punch Test Method for Metallic Materials, CWA 15627:2006(E), CEN, Brussels, Belgium, 2006.
33. J.M. Torralba, L. Fuentes-Pacheco, N. García-Rodríguez, M. Campos: Adv. Powder Technol., 2013, vol. 24, Issue 5, pp. 813-17.10.1016/j.apt.2012.11.015 ↗
34. M.K. Miller, K.F. Russell and D.T. Hoelzer: J. Nucl. Mater., 2006, vol. 351, pp. 261-68.10.1016/j.jnucmat.2006.02.004 ↗
35. G. Ressel, D. Holec, A. Fian, F. Mendez-Martin and H. Leitner: Appl. Phy. A, 2013, vol. 115, pp. 851-58.10.1007/s00339-013-7877-y ↗
36. G. Ressel, P. Parz, S. Primig, H. Leitner, H. Clemens, and W. Puff: J. Appl Phys., 2014, vol. 115, pp. 313–317.10.1063/1.4869787 ↗
37. A. Molinari, S. Libardi, M. Leoni and P. Scardi: Acta Mater., 2010, vol. 58, issue 3, pp. 963-66.10.1016/j.actamat.2009.10.012 ↗
38. L. Fuentes-Pacheco, M. Campos, and J.M. Torralba: Rev. Metal., 2011, vol. 47, issue 5, 373-80.10.3989/revmetalm.1055 ↗
39. T. Grosdidier, G. Ji, S. Launois: Scr. Mater., 2007, vol. 57, issue 6, pp. 525-28.10.1016/j.scriptamat.2007.05.022 ↗
40. K.A. Darling, B.K. VanLeeuwen, J.E. Semones, C.C. Koch, R.O. Scattergood, L.J. Kecskes and S.N. Mathaudhu: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4365-71.10.1016/j.msea.2011.02.080 ↗
41. G.Ji, T. Grosdidier, N. Bozzolo and S. Launois: Intermetallics, 2007, vol. 15, pp. 108-18.10.1016/j.intermet.2006.03.006 ↗
42. T. Grosdidier, D. Goran, G. Ji and N. Llorca: J. Alloys Compd., 2010, vol. 504, supplement 1, pp. S456-59.10.1016/j.jallcom.2010.03.035 ↗
43. JC Huang, IC Hsiao, TD Wang, and BY Lou: Scripta Mater., 2000, vol. 43, issue 3, pp. 213-20.10.1016/S1359-6462(00)00393-6 ↗
44. Z.A. Munir, U. Anselmi-Tamburini and M. Ohyanagi: J. Mater. Sci, 2006, vol. 41, pp. 763-77.10.1007/s10853-006-6555-2 ↗
45. E.O. Hall: Proc. Phys. Soc. B., 1951, vol. 64, pp. 747-53.10.1088/0370-1301/64/9/303 ↗
46. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25-32.
47. Z. Oksiuta and N. Baluc: J. Nucl. Mater., 2009, vol. 386–388, pp. 426-29.10.1016/j.jnucmat.2008.12.148 ↗