In Situ Study of the Influence of Nickel on the Phase Transformation Kinetics in Austempered Ductile Iron
Source abstract
Abstract
Phase fractions and austenite carbon contents in austempered ductile iron samples with three different nickel contents were determined by in situ neutron diffraction. The samples were austenitized at 1178 K (905 °C) for 30 minutes and austempered for 3.5 hours at temperatures between 523 K and 723 K (250 °C and 450 °C) using a mirror furnace. Based on the in situ neutron diffraction studies, plateau times were derived, which determine the end of stage I reaction. The austenite contents increase for higher austempering temperatures when the austempering times are selected properly, considering the accelerated phase transformation at higher temperature. Appropriate austempering times were derived for austempering temperatures between 523 K and 723 K (250 °C and 450 °C). Increased nickel contents lead to higher austenite phase fractions. Moreover the retarding effect of nickel on the phase transformation was quantified. The plateau values of phase fraction and the according austempering times were converted to TTT diagrams. The evolution of the austenite carbon content shows a maximum at 623 K (350 °C) austempering temperature. This can be explained by temperature-dependent carbide precipitation and carbon diffusion into lattice defects. Fine carbides within the ferrite could be found by preliminary APT analysis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. DIN EN 1563:2011, Founding—Ausferritic spheroidal graphite cast iron.
2. DIN EN 1564:2011, Founding—Spheroidal graphite cast irons.
3. [3] Keough, J.R.; Hayrynen, K.L.: Trans. Am. Foundry Soc. 118 (2010): 503-517.
4. [4] Zhang, J.; Zhang, N.; Zhang, M.; Lu, L.; Zeng, D.; Song, Q.: Mater. Lett. 119 (2014): 47-50. doi:10.1016/j.matlet.2013.12.08610.1016/j.matlet.2013.12.086 ↗
5. Hernández-Rivera, J.L., Camposcambranis, R.E., Delagarza, A.: Mater. Des. 32 (2011): 4756–476210.1016/j.matdes.2011.06.030 ↗
6. [6] Yang, J.; Putatunda, S.K.: Mater. Des. 25 (2004): 219-230. doi:10.1016/j.matdes.2003.09.02110.1016/j.matdes.2003.09.021 ↗
7. [7] Hafiz, M.: Trans. Am. Foundry Soc. 111 (2003): 715-724.
8. [8] Sobota, A.; Wolf, G.; Stets, W.; Nissen, A.: Giesserei 99/4 (2012): 82-96.
9. [9] Basso, A.; Martínez, R.; Sikora, J.: J. Alloys Compd. 509 (2011): 9884– 9889. doi:10.1016/j.jallcom.2011.07.06910.1016/j.jallcom.2011.07.069 ↗
10. [10] Batra, U.; Ray, S.; Prabhakar, S.R.: J. Mater. Eng. Perform. 13 (2004): 64-68. doi:10.1361/1059949041751510.1361/10599490417515 ↗
11. [11] Blackmore, P.A.; Harding, R.A.: J. Heat Treat. 3 (1984): 310-325. doi:10.1007/BF0283312510.1007/BF02833125 ↗
12. [12] Meier, L.; Hofmann, M.; Saal, P.; Volk, W.; Hoffmann, H.: Mater. Charact. 85 (2013): 124-133. doi:10.1016/j.matchar.2013.09.00510.1016/j.matchar.2013.09.005 ↗
13. Hofmann, M., Schneider, R., Seidl. G.A., Rebelo-Kornmeiera, J., Wimpory, R.C., Garbe, U., Brokmeier, H.-G. (2006) Condens. Matter 385-386: 1035-1037. doi:10.1016/j.physb.2006.05.33110.1016/j.physb.2006.05.331 ↗
14. [14] Black, D.R.; Windover, D.; Henins, A.; Gil, D.; Filliben, J.; Cline, J.P.: Powder Diffr. 25 (2010): 187-190. doi:10.1154/1.340948210.1154/1.3409482 ↗
15. Cullity, B.D.: Elements of X-ray Diffraction. 2nd ed. Reading, MA: Addison-Wesley (1978).
16. [16] Spieß, L.: Moderne Rötgenbeugung: Röntgendiffraktometrie für Materialwissenschftler, Physiker und Chemiker. 2nd ed. Wiesbaden: Teubner (2009).10.1007/978-3-8349-9434-9 ↗
17. L. Meier: In-situ-Messung der Phasenumwanlungskinetik von Ausferritischem Gusseisen. Dissertation, München (2015).
18. [18] Gnäupel-Herold, T.; Creuzinger, A.: Mater. Sci. Eng., A 528 (2011): 3594-3600. doi:10.1016/j.msea.2011.01.03010.1016/j.msea.2011.01.030 ↗
19. [19] Brokmeier, H.-G.; Gan, W.M.; Randau, C.; Völler, M.; Rebelo-Kornmeier, J.; Hofmann, M.: Nucl. Instrum. Methods Phys. Res., Sect. A 642 (2011): 87–92. doi:10.1016/j.nima.2011.04.00810.1016/j.nima.2011.04.008 ↗
20. [20] Randau, C.; Garbe, U.; Brokmeier, H.-G.: J. Appl. Crystallogr. 44 (2011): 641-646. doi:10.1107/S002188981101206410.1107/S0021889811012064 ↗
21. [21] Ridley, N.; Stuart, H.: Met Sci 4 (1970): 219-222. doi:10.1179/msc.1970.4.1.21910.1179/msc.1970.4.1.219 ↗
22. [22] Rouns, T.N.; Rundman, K.B.: AFS Transactions 95 (1987):851-874
23. [23] Bahmani, M.; Elliott, R.: J. Mater. Sci. 32 (1997): 4783-4791. doi:10.1023/A:101868711573210.1023/A:1018687115732 ↗
24. [24] Nili Ahmadabadi, M.: Metall. Mater. Trans. A 29A (1998):2297-2306. doi:10.1007/s11661-998-0107-010.1007/s11661-998-0107-0 ↗
25. [25] Radzikowska, J.M.: Mater. Charact. 54 (2005): 287– 304. doi:10.1016/j.matchar.2004.08.01910.1016/j.matchar.2004.08.019 ↗
26. [26] Górny, M.; Tyrała, E.; Lopez, H.: J. Mater. Eng. Perform. 23 (2014):3505-3510. doi:10.1007/s11665-014-1167-510.1007/s11665-014-1167-5 ↗
27. [27] Aranzabal, J.; Gutierrez, I.; Rodriguez-Ibabe, J.M.; Urcola, J.J.: Metall. Mater. Trans. A 28 (1997): 1143-1156. doi:10.1007/s11661-997-0280-610.1007/s11661-997-0280-6 ↗
28. [28] Bahmani, M.; Elliott, R.; Varahram, N.: J. Mater. Sci. 32 (1997): 5383-5388. doi:10.1023/A:101863131476510.1023/A:1018631314765 ↗
29. [29] Daber, S.; Ravishankar, K.S.; Rao, P.: J. Mater. Sci. 43 (2008): 4929-4937. doi:10.1007/s10853-008-2717-810.1007/s10853-008-2717-8 ↗
30. [30] Hsu, C.-H.; Lin, L.-T.: Mater. Sci. Eng., A 528 (2011): 5706–5712. doi:10.1016/j.msea.2011.04.03510.1016/j.msea.2011.04.035 ↗
31. [31] Putatunda, S.K.: J. Mater. Eng. Perform. 9 (2000):193-203. doi:10.1361/10599490077034615010.1361/105994900770346150 ↗
32. [32] Moore, D.J.; Rouns, T.N.; Rundman, K.B.: AFS Transactions 94 (1986): 255-264.
33. [33] Takahashi, T.; Abe, T.; Tada, S.: Metall. Mater. Trans. A 27A (1996): 1589-1598. doi:10.1007/BF0264981710.1007/BF02649817 ↗
34. [34] Dorazil, E.: High Strength Austempered Ductile Cast Iron. New York: Horwood (1991).
35. [35] Herfurth, K.: Giesserei-Prax. 54/4 (2003): 137-142.
36. [36] Bhadeshia, H.K.D.H.; Edmons, D.V.: Metall. Trans. A 10 (1979): 895-907. doi:10.1007/BF0265830910.1007/BF02658309 ↗
37. [37] Voigt, R. C.; Loper, C.R.: J. Heat Treat. 3 (1984): 291-309. doi:10.1007/BF0283312410.1007/BF02833124 ↗
38. Stone, H.J.; Peet, M.J.; Bhadeshia, H.K.D.H.; Whithers, P.J.; Babu, S.S.; Specht, E.D. (2008) Proc. R. Soc. A 464: 1009-1027. doi:10.1098/rspa.2007.020110.1098/rspa.2007.0201 ↗
39. [39] Gong, W.; Tomota, Y.; Adachi, Y.; Paradowska, A.M.; Kelleher, J.F.; Zhang, S.Y.: Acta Mater. 61 (2013): 4142-4154. doi:10.1016/j.actamat.2013.03.04110.1016/j.actamat.2013.03.041 ↗
40. [40] Gong, W.; Tomota, Y.; Harjo, S.; Su, Y.H.; Aizawa, K.: Acta Mater. 85 (2015): 243-249. doi:10.1016/j.actamat.2014.11.02910.1016/j.actamat.2014.11.029 ↗
41. [41] Roberts, C.S.: Trans. Am. Inst. Min., Metall. Pet. Eng. 149 (1953): 203-204.
42. [42] Sandvik, B.P.: Metall. Trans. A 13 (1982): 777-787. doi:10.1007/BF0264239110.1007/BF02642391 ↗
43. [43] Franetovic, V.; Shea, M.M.; Ryntz, E.F.: Mater. Sci. Eng. 96 (1987): 231-245. doi:10.1016/0025-5416(87)90556-810.1016/0025-5416(87)90556-8 ↗
44. [44] Ahmadabadi, M.N.; Niyama, E.; Echigoya, J.: Mater. Sci. Eng., A 194 (1995): 87-98. doi:10.1016/0921-5093(94)09652-X10.1016/0921-5093(94)09652-X ↗
45. [45] Caballero, F.G.; Miller, M.K.; Garcia-Mateo, C.: Acta Mater. 58 (2010): 2338-2343. doi:10.1016/j.actamat.2009.12.02010.1016/j.actamat.2009.12.020 ↗
46. [46] Bhadeshia, H.K.D.H.: Bainite in steels. 2nd ed. London: IOM Communications (2001): 68-70.
47. [47] Christian, J.W.: The theory of transformations in metals and alloys: Part I. 3rd ed. Amsterdam, Pergamon Press (2002): 7.
48. Askill, J.: Tracer Diffusion Data for Metals, Alloys, and Simple Oxides. New York: IFI/Plenum (1970). doi:10.1007/978-1-4684-6075-910.1007/978-1-4684-6075-9 ↗
49. [49] Hernández-Riveraa, J.L.; Garay-Reyesb, C.G.; Campos-Cambranisb, R.E.; Cruz-Rivera, J.J.: Mater. Charact. 83 (2013): 89-96. doi:10.1016/j.matchar.2013.06.00410.1016/j.matchar.2013.06.004 ↗