Analysis for Free Dendritic Growth Model Applicable to Nondilute Alloys
Source abstract
Abstract
A steady-state free dendritic growth model applicable to concentrated alloys was proposed as an extension of Wang et al.’s model.[14] The present model adopted a realistic thermodynamic model to replace the Baker–Cahn equation and included a generalized marginal stability criterion and a nondilute solute trapping model to completely eliminate the dilute alloy limitation. Comparative analysis shows that Wang et al.’s model is a very close approximation to the present model at low undercoolings for dilute alloys. However, the difference appears at high undercoolings even for dilute alloys. Furthermore, the difference of the model predictions for both models increases with nominal composition of alloys due to the inherent limitation of dilute alloys in Wang et al.’s model. A comparison with the experimental data for Cu70Ni30 alloy demonstrates the applicability of the present model to nondilute alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. D.M. Herlach: Mater. Sci. Eng. R, 1994, vol. 12, pp. 177–272.10.1016/0927-796X(94)90011-6 ↗
2. W.J. Boettinger, S.R. Coriell, A.L. Gereer, A. Karma, W. Kurz, M. Rappaz, and R. Trivedi: Acta Metall., 2000, vol. 48, pp. 43–70.
3. F. Liu and G.C. Yang: Int. Mater. Rev., 2006, vol. 51, pp. 145–70.10.1179/174328006X102484 ↗
4. J. Lipton, M.E. Glicksman, and W. Kurz: Mater. Sci. Eng., 1984, vol. 65, pp. 57–63.10.1016/0025-5416(84)90199-X ↗
5. J. Lipton, W. Kurz, and R. Trivedi: Acta Metall., 1987, vol. 35, pp. 957–64.10.1016/0001-6160(87)90174-X ↗
6. R. Trivedi, J. Lipton, and W. Kurz: Acta Metall., 1987, vol. 35, pp. 965–70.10.1016/0001-6160(87)90175-1 ↗
7. W.J. Boettinger, S.R. Coriell, and R. Trivedi: in Rapid Solidification Processing: Principles and Technologies IV, R. Mehrabian, and P.A. Parrish, eds., Claitor’s Publishing Division, Baton Rouge, LA, 1988, pp. 13–25.
8. A.G. Divenuti and T. Ando: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 3047–56.10.1007/s11661-998-0212-0 ↗
9. R. Willnecker, D.M. Herlach, and B. Feuerbacher: Appl. Phys. Lett., 1990, vol. 56, pp. 324–26.10.1063/1.103289 ↗
10. K. Eckler, R.F. Cochrane, D.M. Herlach, B. Feuerbacher, and M. Jurisch: Phys. Rev. B, 1992, vol. 45, pp. 5019–22.10.1103/PhysRevB.45.5019 ↗
11. C.B. Amold, M.J. Aziz, M. Schwarz, and D.M. Herlach: Phys. Rev. B, 1999, vol. 59, pp. 334–43.10.1103/PhysRevB.59.334 ↗
12. D. Jou, J. Casas-Vazquez, and G. Lebon: Rep. Prog. Phys., 1999, vol. 62, pp. 1035–1142.10.1088/0034-4885/62/7/201 ↗
13. P.K. Galenko and D.A. Danilov: J. Cryst. Growth, 1999, vol. 197, pp. 992–1002.10.1016/S0022-0248(98)00977-4 ↗
14. H.F. Wang, F. Liu, Z. Chen, G.C. Yang, and Y.H. Zhou: Acta Mater., 2007, vol. 55, pp. 497–506.10.1016/j.actamat.2006.08.042 ↗
15. S. Li, J. Zhang, and P. Wu: J. Cryst. Growth, 2010, vol. 312, pp. 982–88.10.1016/j.jcrysgro.2009.12.070 ↗
16. S. Li, J. Zhang, and P. Wu: Scripta Mater., 2009, vol. 61, pp. 485–88.10.1016/j.scriptamat.2009.05.001 ↗
17. S. Önel and T. Ando: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2449–58.10.1007/s11661-008-9568-4 ↗
18. H. Hartmann, P.K. Galenko, D. Holland-Moritz, M. Kolbe, D.M. Herlach, and O. Shuleshova: J. Appl. Phys., 2008, vol. 103, p. 073509.10.1063/1.2903920 ↗
19. P.K. Galenko: Phys. Rev. B, 2002, vol. 65, p. 144103.10.1103/PhysRevB.65.144103 ↗
20. M.J. Aziz and T. Kaplan: Acta Metall., 1988, vol. 36, pp. 2335–47.10.1016/0001-6160(88)90333-1 ↗
21. M. Hillert: Acta Mater., 1999, vol. 47, pp. 4481–4505.10.1016/S1359-6454(99)00336-5 ↗
22. S. Li, J. Zhang, and P. Wu: Scripta Mater., 2010, vol. 62, pp. 716–19.10.1016/j.scriptamat.2010.01.041 ↗
23. J.C. Baker and J.W. Cahn: Solidification, ASM, Metals Park, OH, 1971, pp. 23–58.
24. D. Turnbull: J. Phys. Chem., 1962, vol. 66, pp. 609–13.10.1021/j100810a009 ↗
25. J.S. Langer and H. Muller-Krümbhaar: Acta Metall., 1978, vol. 26, pp. 1681–87.10.1016/0001-6160(78)90078-0 ↗
26. R. Trivedi and W. Kurz: Acta Metall., 1986, vol. 34, pp. 1663–70.10.1016/0001-6160(86)90112-4 ↗
27. P.K. Galenko and D.V. Danilov: Phys. Rev. E, 2004, vol. 69, p. 051608.10.1103/PhysRevE.69.051608 ↗
28. S.L. Sobolev: Phys. Rev. E, 1997, vol. 55, pp. 6845–54.10.1103/PhysRevE.55.6845 ↗
29. P.K. Galenko: Phys. Rev. E, 2007, vol. 76, p. 031606.10.1103/PhysRevE.76.031606 ↗
30. G.P. Ivantsov: Dokl Akad Nauk SSSR, 1947, vol. 58, pp. 567–69.
31. G.P. Ivantsov: Dokl Akad Nauk SSSR, 1952, vol. 83, pp. 573–76.
32. H.J. Fecht, M.X. Zhang, Y.A. Chang, and J.H. Perepezko: Metall. Trans. A, 1989, vol. 20A, pp. 795–803.10.1007/BF02651646 ↗
33. U.R. Kattner: JOM, 1997, vol. 49 (12), pp. 14–19.10.1007/s11837-997-0024-5 ↗
34. S. An Mey and R.W.T.H. Aachen: CALPHAD, 1992, vol. 16, pp. 255–60.10.1016/0364-5916(92)90022-P ↗
35. X.Y. Yan, Y.A. Chang, Y. Yang, F.Y. Xie, S.L. Chen, F. Zhang, S. Daniel, and M.H. He: Intermetallics, 2001, vol. 9, pp. 535–38.10.1016/S0966-9795(01)00036-X ↗