Forming Nanocrystalline Structures in Metal Particle Impact
Source abstract
Abstract
Grain refinement by plastic deformation is becoming increasingly popular as a way of producing metals with improved properties, such as higher mechanical strength. Surface treatment techniques in which a metallic substrate is bombarded with metallic particles can generate nanocrystalline layers in the impact zone. Understanding the physical mechanisms underlying this grain refinement is crucial for achieving an improvement of existing experimental processes. In this article, we propose a numerical framework combining finite element (FE) simulations with a dislocation-based material model to predict the evolution of the microstructure under particle impact. A single particle normally impacting on a metallic substrate was simulated at different initial velocities. The simulations were compared with previously reported numerical and experimental data. The results indicate that our model accurately captures the grain refinement in the impact zone for a broad range of velocities. This approach provides valuable information on the formation of nanocrystalline layers in both the substrate and the impacting particle. Its potential applications include processes involving surface treatment by high velocity particles, such as shot peening, surface mechanical attrition treatment, kinetic metallization, cold spray, etc.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High-Velocity Impact and Material Behavior · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. M. Umemoto, K. Todaka, and K. Tsuchiya: Mater. Sci. Eng. A, 2004, vols. 375–377, pp. 899–904.10.1016/j.msea.2003.10.198 ↗
2. P.C. King, S.H. Zahiri, and M. Jahedi: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2115–23.10.1007/s11661-009-9882-5 ↗
3. H. Assadi, F. Gärtner, T. Stoltenhoff, and H. Kreye: Acta Mater., 2003, vol. 51, pp. 4379–94.10.1016/S1359-6454(03)00274-X ↗
4. M. Grujicic, C.L. Zhao, W.S. DeRosset, and D. Helfritch: Mater. Design, 2004, vol. 25, pp. 681–88.10.1016/j.matdes.2004.03.008 ↗
5. W.-Y. Li, H. Liao, C.-J. Li, G. Li, C. Coddet, and X. Wang: Appl. Surf. Sci., 2006, vol. 253, pp. 2852–62.10.1016/j.apsusc.2006.05.126 ↗
6. V. Lemiale, Y. Estrin, H.S. Kim, and R. O’Donnell: Comput. Mater. Sci., 2010, vol. 48, pp. 124–32.10.1016/j.commatsci.2009.12.018 ↗
7. B.N. Mordyuk, Y.V. Milman, M.O. Iefimov, G.I. Prokopenko, V.V. Silberschmidt, M.I. Danylenko, and A.V. Kotko: Surf. Coat. Technol., 2008, vol. 202, pp. 4875–83.10.1016/j.surfcoat.2008.04.080 ↗
8. Y. Estrin, L.S. Tóth, A. Molinari, and Y. Bréchet: Acta Mater., 1998, vol. 46, pp. 5509–22.10.1016/S1359-6454(98)00196-7 ↗
9. L.S. Tóth, A. Molinari, and Y. Estrin: J. Eng. Mater. Technol.–Trans. ASME, 2002, vol. 124, pp. 71–77.10.1115/1.1421350 ↗
10. S.C. Baik, Y. Estrin, R.J. Hellmig, H.-T. Jeong, H.-G. Brokmeier, and H.S. Kim: Z. Metallkd., 2003, vol. 94, pp. 1189–98.10.3139/146.031189 ↗
11. S.C. Baik, Y. Estrin, H.S. Kim, and R.J. Hellmig: Mater. Sci. Eng. A, 2003, vol. 351, pp. 86–97.10.1016/S0921-5093(02)00847-X ↗
12. Msc.Marc Volume A, Theory and user information, Version 2005, Chapter 5 Structural procedure library, Copyright Msc.software corporation, Printed in USA.
13. I.H. Guzelbey, A. Erklig, and B. Kanber: Acta Mech. Sinica, 2005, vol. 21, pp. 395–401.10.1007/s10409-005-0048-4 ↗
14. T. Schmidt, F. Gärtner, H. Assadi, and H. Kreye: Acta Mater., 2006, vol. 54, pp. 729–42.10.1016/j.actamat.2005.10.005 ↗
15. B. Farrokh and A.S. Khan: Int. J. Plast., 2009, vol. 25, pp. 715–32.10.1016/j.ijplas.2008.08.001 ↗