journal article·2013-10

Effect of pH on Semiconducting Property of Passive Film Formed on Ultra-High-Strength Corrosion-Resistant Steel in Sulfuric Acid Solution

Min Sun, Kui Xiao, Chaofang Dong, Xiaogang Li, Ping Zhong

Publisher page

Abstract

Because Cr9Ni5MoCo14 is a new ultra-high-strength corrosion-resistant steel, it is important to study its corrosion behavior in sulfuric acid solution, which is used to simulate the aggressive environment. The effect of pH on the electrochemical and semiconducting properties of passive films formed on ultra-high-strength corrosion-resistant steel in sulfuric acid solution was investigated by means of the potentiodynamic polarization technique, electrochemical impedance spectroscopy (EIS), Mott-Schottky analysis, and X-ray photoelectron spectroscopy (XPS). The results indicated that Cr9Ni5MoCo14 steel showed a passive state in acid solutions. The corrosion behavior of this Cr9Ni5MoCo14 alloy was influenced by the passive film formed on the surface, including thickness, stability, and partitioning of elements of the passive film. The passive current density decreases with increasing pH, and the corrosion resistance was enhanced by the increasing thickness and depletion of the defects within the passive film. Moreover, an enrichment of chromium (primarily the oxides of Cr) and depletion of iron in the passive film led to improved corrosion resistance. These results can provide a theoretical basis for use of this alloy and further development of ultra-high-strength corrosion-resistant steel in today’s society.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. M.L.A. Graça, C.Y. Hoo, O.M.M: Silva and N.J. Lourenço. Eng. Fail. Anal., 2009, vol. 16, pp. 182-86.10.1016/j.engfailanal.2008.02.003 ↗
2. Y. Tomita: Mater. Sci. Technol., 1991, vol. 7, pp. 481-89.10.1179/026708391790183754 ↗
3. W. Garrison: Metals and Materials Society, 1990, vol. 42, pp. 20-24.10.1007/BF03220942 ↗
4. Y. Tomita: Int. Mater. Rev., 2000, vol. 45, pp. 27-37.10.1179/095066000771048791 ↗
5. Y.-S. Choi, J.-G. Kim, Y.-S. Park and J.-Y. Park: Mater. Lett., 2007, vol. 61, pp. 244-47.10.1016/j.matlet.2006.04.041 ↗
6. A.N. Isfahanya, H. Saghafiana, G. Borhanib: J. Alloys Compd., 2011, vol. 509, pp. 3931-36.10.1016/j.jallcom.2010.12.174 ↗
7. C.O.A. Olsson and D. Landolt: Electrochim. Acta, 2003, vol. 48, pp. 1093-1104.10.1016/S0013-4686(02)00841-1 ↗
8. J.H. Potgieter, P.A. Olubambi, L. Cornish, C.N. Machio, and E.-S.M. Sherif: Corros. Sci., 2008, vol. 50, pp. 2572-79.10.1016/j.corsci.2008.05.023 ↗
9. D. Wallinder, J. Pan, C. Leygraf and A. Delblanc-Bauer: Corros. Sci., 1998, vol. 41, pp. 275-89.10.1016/S0010-938X(98)00122-X ↗
10. S. Haupt and H.H. Strehblow: Corros. Sci., 1995, vol. 37, pp. 43-54.10.1016/0010-938X(94)00104-E ↗
11. W. Fredriksson, D. Petrini, K. Edström, F. Björefors and L. Nyholm: Corro. Sci., 2013, vol. 67, pp. 268-80.10.1016/j.corsci.2012.10.021 ↗
12. R.D. Moser, P.M. Singh, L.F. Kahn and K.E. Kurtis: Corros. Sci., 2012, vol. 57, pp. 241-53.10.1016/j.corsci.2011.12.012 ↗
13. Y.B. Hu, C.F. Dong, M. Sun, K. Xiao, P. Zhong and X.G. Li: Corros. Sci., 2011, vol. 53, pp. 4159-65.10.1016/j.corsci.2011.08.024 ↗
14. S. Min, X. Kui, D. Chaofang, L. Xiaogang and Z. Ping: Acta Metall. Sinica, 2011, vol. 47, pp. 442-48.
15. Z.J. Yan, S. Min, L. Dabo, L. Xiaogang and L. Tianqi: Int. J. Miner. Metall. Mater., 2010, vol. 17, pp. 282-89.10.1007/s12613-010-0108-z ↗
16. A. Davydov, K.V. Rybalka, L.A. Beketaeva, G.R. Engelhardt, P. Jayaweera and D.D. MacDonald: Corros. Sci., 2005, vol. 47, pp. 195-215.10.1016/j.corsci.2004.05.005 ↗
17. M. Stratmann andJ. Müller: Corros. Sci., 1994, vol. 36, pp. 327-59.10.1016/0010-938X(94)90161-9 ↗
18. C.A. Della Rovere, J.H. Alano, R. Silva, P.A.P. Nascente, J. Otubo and S.E. Kuri: Corros. Sci., 2012, vol. 57, pp. 154–61.10.1016/j.corsci.2011.12.022 ↗
19. X. Cheng, Z. Feng, C. Li, C. Dong and X. Li: Electrochim. Acta, 2011, vol. 56, pp. 5860-65.10.1016/j.electacta.2011.04.127 ↗
20. J.W. Schultze and M.M. Lohrengel: Electrochim. Acta, 2000, vol. 45, pp. 2499-513.10.1016/S0013-4686(00)00347-9 ↗
21. M. Metikoš-Huković and R. Babić: Corros. Sci., 2007, vol. 49, pp. 3570-79.10.1016/j.corsci.2007.03.023 ↗
22. I. Betova, M. Bojinov, T. Laitinen, K. Mäkelä, P. Pohjanne and T. Saario: Corros. Sci., 2002, vol. 44, pp. 2699-723.10.1016/S0010-938X(02)00074-4 ↗
23. S.E. Ziemniak and M. Hanson: Corros. Sci., 2002, vol. 44, pp. 2209-30.10.1016/S0010-938X(02)00004-5 ↗
24. P.A. Schweitzer. Fundamentals of Metallic Corrosion. Corrosion Engineering Handbook, CRC Press, Boca Raton, Florida, 2007, pp. 34-35.
25. X. Tang and Y.F. Cheng: Electrochim. Acta, 2009, vol. 54, pp. 1499-1505.10.1016/j.electacta.2008.09.037 ↗
26. I. Annergren, M. Keddam, H. Takenouti and D. Thierry: Electrochim. Acta, 1997, vol. 42, pp. 1595-1611.10.1016/S0013-4686(96)00321-0 ↗
27. I. Annergren, M. Keddam, H. Takenouti and D. Thierry: Electrochim. Acta, 1993, vol. 38, pp. 763-71.10.1016/0013-4686(93)85031-S ↗
28. M. Keddam, O.R. Mattos and H. Takenouti: Electrochim. Acta, 1986, vol. 31, pp. 1159-65.10.1016/0013-4686(86)80128-1 ↗
29. D.D. MacDonald, K.M. Ismail and E. Sikora: J. Electrochem. Soc., 1998, vol. 145, pp. 3141-49.10.1149/1.1838777 ↗
30. D.D. MacDonald: J. Electrochem. Soc., 1992, vol. 139, pp. 3434-49.10.1149/1.2069096 ↗
31. Z. Feng, X. Cheng, C. Dong, L. Xu and X. Li: Corros. Sci., 2010, vol. 52, pp. 3646-53.10.1016/j.corsci.2010.07.013 ↗
32. H. Luo, C.F. Dong, K. Xiao and X.G. Li: Appl. Surf. Sci., 2011, vol. 258, pp. 631-39.10.1016/j.apsusc.2011.06.077 ↗
33. A. Fattah-alhosseini, F. Soltani, F. Shirsalimi, B. Ezadi, and N. Attarzadeh: Corros. Sci., 2011, vol. 53, pp. 3186-92.10.1016/j.corsci.2011.05.063 ↗
34. S. Ningshen, U. Kamachi Mudali, V.K. Mittal and H.S. Khatak: Corros. Sci., 2007, vol. 49, pp. 481-96.10.1016/j.corsci.2006.05.041 ↗
35. Z.H. Dong, W. Shi, G.A. Zhang and X.P. Guo: Electrochim. Acta, 2011, vol. 56, pp. 5890-97.10.1016/j.electacta.2011.04.120 ↗
36. D.D. MacDonald, A. Sun, N. Priyantha and P. Jayaweera: J. Electroanal. Chem., 2004, vol. 572, pp. 421-31.10.1016/j.jelechem.2004.05.032 ↗
37. S. Fajardo, D.M. Bastidas, M.P. Ryan, M. Criado, D.S. McPhail and J.M. Bastidas: Appl. Surf. Sci., 2010, vol. 256, pp. 6139-43.10.1016/j.apsusc.2010.03.140 ↗
38. Y. Zhang, D.D. MacDonald, M. Urquidi-MacDonald, G.R. Engelhardt and R.B. Dooley: Corros. Sci., 2006, vol. 48, pp. 3812-23.10.1016/j.corsci.2006.01.009 ↗
39. G. Goodlet, S. Faty, S. Cardoso, P.P. Freitas, A.M.P. Simões, M.G.S. Ferreira, and M. Da Cunha Belo: Corros. Sci., 2004, vol. 46, pp. 1479–99.10.1016/j.corsci.2003.09.022 ↗
40. L. Hamadou, A. Kadri and N. Benbrahim: Corros. Sci., 2010, vol. 52, pp. 859-64.10.1016/j.corsci.2009.11.004 ↗
41. M.H. Dean and U. Stimming: Corros. Sci., 1989, vol. 29, pp. 199-211.10.1016/0010-938X(89)90030-9 ↗
42. H. Tsuchiya and S. Fujimoto: Sci. Technol. Adv. Mater., 2004, vol. 5, pp. 195-200.10.1016/j.stam.2003.10.014 ↗
43. V.A. Alves and C.M.A. Brett: Electrochim. Acta, 2002, vol. 47, pp. 2081-91.10.1016/S0013-4686(02)00077-4 ↗
44. N.E. Hakiki, M.F. Montemor, M.G.S. Ferreira, and M. da Cunha Belo: Corros. Sci., 2000, vol. 42, pp. 687–702.10.1016/S0010-938X(99)00082-7 ↗
45. C. Sunseri, S. Piazza and F.D. Quarto: J. Electrochem. Soc., 1990, vol. 137, pp. 2411-17.10.1149/1.2086952 ↗
46. A.V. Sameljuk, O.D. Neikov, A.V. Krajnikov, Y.V. Milman and G.E. Thompson: Corros. Sci., 2004, vol. 46, pp. 147-58.10.1016/S0010-938X(03)00138-0 ↗
47. A. Fattah-alhosseini, F. Soltani, F. Shirsalimi, B. Ezadi and N. Attarzadeh: Corros. Sci., 2011, vol. 53, pp. 3186-92.10.1016/j.corsci.2011.05.063 ↗
48. J. Chivot, L. Mendoza, C. Mansour, T. Pauporté and M. Cassir: Corros. Sci., 2008, vol. 50, pp. 62-69.10.1016/j.corsci.2007.07.002 ↗
49. M.J. Carmezim, A.M. Simões, M.O. Figueiredo, and M. Da Cunha Belo, Corros. Sci., 2002, vol. 44, pp. 451–65.10.1016/S0010-938X(01)00076-2 ↗
50. M.J. Carmezim, A.M. Simões, M.F. Montemor, and M.D. Cunha Belo: Corros. Sci., 2005, vol. 47, pp. 581–91.10.1016/j.corsci.2004.07.002 ↗
51. C.R. Clayton, G.P. Halada and J.R. Kearns: Mater. Sci. Eng., A, 1995, vol. 198, pp. 135-44.10.1016/0921-5093(95)80068-6 ↗
52. N.E. Hakiki, M.F. Montemor, M.G.S. Ferreira, and M. da Cunha Belo: Corros. Sci., 2000, vol. 42, pp. 687–702.10.1016/S0010-938X(99)00082-7 ↗
53. M. da Cunha Belo, B. Rondot, C. Compere, M.F. Montemor, A.M.P. Simões, and M.G.S. Ferreira: Corros. Sci., 1998, vol. 40, pp. 481–94.10.1016/S0010-938X(98)00016-X ↗