journal article·2007-06

Solidification under Forced-Flow Conditions in a Shallow Cavity

A.N. Turchin, D.G. Eskin, L. Katgerman

Publisher page

Abstract

The solidification of an Al-4.5 pct Cu alloy in a shallow cavity under conditions of forced flow was studied both by fluid-dynamics simulations with solidification included and by experiments. The variation in bulk-flow velocity and initial superheat dramatically changes the macro- and microstructure, promoting grain refinement, an equiaxed-to-columnar transition (ECT), the formation of peculiar grain and dendrite morphologies, etc. The solidification parameters during solidification in the shallow cavity under forced-flow conditions have been determined by computer simulations and partially compared with the experimental results. The interaction between flow vortices and the progressing solidification front and its effect on structure evolution have been analyzed. Finally, quantitative correlations between microstructure, solidification, and flow parameters have been established.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. K. Murakami, T. Fujiyama, A. Koike, T. Okamoto: Acta Mater., 1983, vol. 31, pp. 1425–3210.1016/0001-6160(83)90012-3 ↗
2. A. Buchholz, S. Engler: Comput. Mater. Sci., 1996, vol. 7, pp. 221–2710.1016/S0927-0256(96)00084-5 ↗
3. M. Guo, Y. Yang, F. Hua, Z. Hu: Z. Metallkd., 2004, vol. 95, pp. 835–3910.3139/146.018030 ↗
4. W.D. Griffits, D.G. McCartney: Mater. Sci. Eng. A, 1996, vol. 216, pp. 47–6010.1016/0921-5093(96)10392-0 ↗
5. S. Steinbach, L. Ratke: Mater. Sci. Eng. A, 2005, vols. 413–414, pp. 200–0410.1016/j.msea.2005.09.010 ↗
6. R.S. Rerko, H.C. de Groh III, C. Beckermann: Mater. Sci. Eng. A, 2003, vol. 347, pp. 186–9710.1016/S0921-5093(02)00592-0 ↗
7. P.A. Nikrityuk, K. Eckert, R. Grundmann: Int. J. Heat Mass Transf., 2006, vol. 49, pp. 1501–1510.1016/j.ijheatmasstransfer.2005.08.035 ↗
8. P.A. Nikrityuk, K. Eckert, B. Willers, S. Eckert: in Modeling of Casting, Welding and Advanced Solidification Processes XI, C.A. Gandin, M. Bellet, eds., TMS, Warrendale, PA, 2006, pp. 333–40
9. A. Turchin, D.G. Eskin, L. Katgerman: Mater. Sci. Eng. A, 2005, vols. 413–414, pp. 98–10410.1016/j.msea.2005.09.020 ↗
10. C.M. Oldenburg, F.J. Spera: Numer. Heat. Transf. B, 1992, vol. 21, pp. 217–2910.1080/10407799208944917 ↗
11. M.R. Barkhudarov, C.W. Hirt: in Modeling of Casting, Welding, and Advanced Solidification Processes VII, M. Cross, J. Campbell, eds., TMS, Warrendale, PA, 1995, pp. 935–46
12. H. Grazzini and D. Nesa: in Solidification Processing ‘97, University of Sheffield, Sheffield, United Kingdom, 1997, pp. 147–50
13. J. Zuidema, Jr.: Doctoral Thesis, Delft University of Technology, Delft, The Netherlands, 2005, pp. 89–103
14. C.J. Vreeman, F.P. Incropera: Int. J. Heat Mass Transf., 2000, vol. 43, pp. 687–70410.1016/S0017-9310(99)00175-1 ↗
15. H. Yao, R.K. Cooper, S. Raghunathan: J. Fluids Eng., 2004, vol. 126, pp. 919–2710.1115/1.1845531 ↗
16. R. Trivedi, H. Miyahara, P. Mazumder, E. Simsek, S.N. Tewari: J. Cryst. Growth., 2001, vol. 222, pp. 365–7910.1016/S0022-0248(00)00761-2 ↗
17. T. Okamoto, K. Kishitake, I. Bessho: J. Cryst. Growth, 1975, vol. 29, pp. 131–3610.1016/0022-0248(75)90216-X ↗
18. W. Kurz, D.J. Fisher: Fundamentals of Solidification, 3rd ed., Trans Tech Publications Ltd., Aedermannsdorf, Switzerland, 1992
19. J. Pilling, A. Hellawell: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 229–3210.1007/BF02647763 ↗
20. D.G. Eskin, Suyitno, L. Katgerman: Progr. Mater. Sci., 2004, vol. 49, pp. 629–71110.1016/S0079-6425(03)00037-9 ↗
21. A.N. Turchin, D.G. Eskin, L. Katgerman: in Continuous Casting, H.R. Müller, ed., Wiley-VCH, Weinheim, Germany, 2005, pp. 283–8910.1002/9783527607969.ch39 ↗
22. S. Henry, T. Minghetti, M. Rappaz: Acta Mater., 1998, vol. 46, pp. 6431–4310.1016/S1359-6454(98)00308-5 ↗
23. U. Feurer: in Quality Control of Engineering Alloys and The Role of Metals Science, H. Nieswaag, J.W. Schut, eds., Delft University of Technology, Delft, The Netherlands, 1978, pp. 131–45
24. D.H. Kirkwood: Mater. Sci. Eng., 1985, vol. 73, pp. L1–L410.1016/0025-5416(85)90319-2 ↗
25. H.J. Diepers, C. Beckermann, I. Steinbach: Acta Mater., 1999, vol. 47, pp. 3663–7810.1016/S1359-6454(99)00239-6 ↗
26. L. Ratke, W.K. Thieringer: Acta Metall., 1985, vol. 33, pp. 1793–180210.1016/0001-6160(85)90003-3 ↗