journal article·2015-01

Microstructural Evolution in Gamma Titanium Aluminides During Severe Hot-Working

Ulrich Fröbel, Andreas Stark

Publisher page

Abstract

The plastic anisotropy of the γ titanium aluminides leads to the formation of shear bands and textures during hot-working. The textures and shear bands are well developed during severe hot-working necessary to achieve well-consolidated microstructures. The underlying mechanisms and the resulting effects on the deformation behavior could thus be studied thoroughly. This was done by scanning electron microscopic, transmission electron microscopic, high-energy X-ray diffraction, and mechanical testing techniques. Accordingly, the plastic anisotropy of the lamellar structure causes the formation of shear bands. The subsequent deformation within the shear bands is then stabilized by recrystallization processes. The plastic anisotropy of the constituent phases, on the other hand, causes the formation of textures in accordance with the directional shear stresses induced by deformation resulting in anisotropic deformation characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. F. Appel, M. Oehring, and R. Wagner: Intermetallics, 2000, vol. 8, pp. 1283-1312.10.1016/S0966-9795(00)00036-4 ↗
2. F. Appel, M. Oehring, J. D. H. Paul, Ch. Klinkenberg, T. Carneiro: Intermetallics, 2004, vol. 12, pp. 791-802.10.1016/j.intermet.2004.02.042 ↗
3. F. Appel, H. Kestler, and H. Clemens: in Intermetallic Compounds, Principles and Practice, vol. 3, J.H. Westbrook and R.L. Fleischer, eds., Wiley, Chichester, 2002, pp. 617–42.10.1002/0470845856.ch29 ↗
4. U. Froebel and F. Appel: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1817-32.10.1007/s11661-007-9203-9 ↗
5. M. H. Yoo and C. L. Fu: Mater. Sci. Eng. A, 1992, vol. 153, p. 470-8.10.1016/0921-5093(92)90239-W ↗
6. M. H. Yoo, J. Zou, and C. L. Fu: Mater. Sci. Eng. A, 1995, vol. 192-193, p. 14-23.10.1016/0921-5093(94)03206-8 ↗
7. F. Appel, U. Christoph, and R. Wagner: Phil. Mag. A, 1995, vol. 72, pp. 341-60.10.1080/01418619508239929 ↗
8. U. Brossmann, M. Oehring, U. Lorenz, F. Appel, and H. Clemens: Z. Metallkd., 2001, vol. 92, pp. 1009-14.
9. U. Brossmann, M. Oehring, and F. Appel: in Structural Intermetallics 2001, K. J. Hemker, D. M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J. M. Larsen, V. K. Sikka, M. Thomas, and J. D. Wittenberger, eds., TMS, Warrendale, PA, 2001, pp. 191–200.
10. V. Seetharaman and S. L. Semiatin: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1987-2004.10.1007/BF02651948 ↗
11. S. L. Semiatin, V. Sethamaran, and J. Weiss: Mater. Sci. Eng. A, 1998, vol. 243, pp. 1-24.10.1016/S0921-5093(97)00776-4 ↗
12. H.-G. Brockmeyer, M. Oehring, U. Lorenz, H. Clemens, and F. Appel: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3563-79.10.1007/s11661-004-0193-6 ↗
13. A. Stark, F.-P. Schimansky, and H. Clemens: Solid State Phenomena, 2010, vol. 160, pp. 301-306.10.4028/www.scientific.net/SSP.160.301 ↗
14. F. Appel and R. Wagner: Mater. Sci. Eng., 1998, vol. R22, pp. 187-268.10.1016/S0927-796X(97)00018-1 ↗
15. M. Yamaguchi and H. Inui: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 127–42.
16. U. Froebel: in Proc. 12th World Conf. Titanium, L. Zhou, H. Chang, Y. Lu, and D. Xu, eds., Ti-2011, Beijing, 2011, pp. 1429–32.
17. F. Appel, J.D.H. Paul, M. Oehring, U. Fröbel und U. Lorenz: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2149-64.10.1007/s11661-003-0279-6 ↗
18. D.E. Larsen, S. Kampe, and L. Christodoulou: in Intermetallic Matrix Composites, vol. 194, D.L. Anton, R. McMeeking, D. Miracle, and P. Martin, eds., MRS, Pittsburgh, PA, 1990, pp. 285–92.
19. L. Lutterotti, M. Bortolotti, G. Ischia, I. Lonardelli, and H.-R. Wenk: Zeitschrift für Kristallographie Supplements, 2007, vol. 26, pp. 125-30.10.1524/zksu.2007.2007.suppl_26.125 ↗
20. C. McCullough, J. J. Valencia, C. G. Levi, and R. Mehrabian: Acta Metall., 1989, vol. 37, pp. 1321-36.10.1016/0001-6160(89)90162-4 ↗
21. Y. Yamabe, M. Takeyama, and M. Kikuchi: in Gamma Titanium Aluminides, Y-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 111–30.
22. H. A. Lipsitt, D. Shechtman, and R. E. Schafrik: Metall. Trans. A, 1975, vol. 6A, 1991-96.10.1007/BF03161822 ↗
23. M. Yamaguchi and Y. Umakoshi: Prog. Mater. Sci., 1990, vol. 34, pp. 1-148.10.1016/0079-6425(90)90002-Q ↗
24. C.J. Williams and M.J. Blackburn: in Ordered Alloys, H. Kear, T. Sims, N.S. Stoloff, and J.H. Westbrook, eds., Claitor’s Publishing Division, BatonRouge, Louisiana, 1970, pp. 425–45.
25. H. A. Lipsitt, D. Shechtman, and R. E. Schafrik: Metall. Trans. A, 1980, vol. 11A, pp. 1369-75.10.1007/BF02653491 ↗
26. H. Inui, Y. Toda, and M. Yamaguchi: Phil. Mag. A, 1993, vol. 67, pp. 1315-32.10.1080/01418619308225357 ↗
27. H. Inui, Y. Toda, Y. Shirai, and M. Yamaguchi: Phil. Mag. A, 1994, vol. 69, pp. 1161-77.10.1080/01418619408242246 ↗
28. S. A. Court, J. P. A. Löfvander, M. H. Loretto, and H. L. Fraser: Phil. Mag. A, 1990, vol. 61, pp. 109-39.10.1080/01418619008235561 ↗
29. F. J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon, Oxford, UK, 1995.
30. M. J. Blackburn: in The Science, Technology, and Applications of Titanium, R. Jaffee and N.E. Promisel, eds., Pergamon Press, 1970, pp. 633–43.
31. C. R. Feng, D. J. Michel, and C. R. Crowe: Scripta Metall., 1988, vol. 22, pp. 1481-86.10.1016/S0036-9748(88)80024-3 ↗
32. C. R. Feng, D. J. Michel, and C. R. Crowe: Scripta Metall., 1989, vol. 23, pp. 1135-40.10.1016/0036-9748(89)90314-1 ↗
33. B. K. Kad and P. M. Hazzledine: Phil. Mag. Lett., 1992, vol. 66, pp. 133-39.10.1080/09500839208229275 ↗
34. F. Appel and U. Christoph: Intermetallics, 1999, vol. 7, pp. 1173-82.10.1016/S0966-9795(99)00030-8 ↗
35. S. L. Semiatin and J. J. Jonas: Formability and Workability of Metals, ASM, Metals Park, OH, 1984.
36. F. Appel, U. Lorenz, M. Oehring, and R. Wagner: German Patent DE 19747257 A1, 1999.
37. American Society for Testing and Materials (1983) ASTM E 399-83. Standard Method for Plane Strain Fracture Toughness of Metallic Materials, Philadelphia, PA.
38. J. K. Lee and M. H. Yoo: Metall. Trans., 1990, vol. 21A, pp. 2521-30.10.1007/BF02646997 ↗
39. K. J. Hemker, B. Viguier, and M. J. Mills: Mater. Sci. Eng. A, 1993, vol. 164, pp. 391-4.10.1016/0921-5093(93)90699-F ↗
40. J.P. Simmons, M.J. Mills, and S.I. Rao: in High-Temperature Ordered Intermetallic Alloys VI, vol. 364, J. Horton, I. Baker, S. Hanada, R.D. Noebe, and D.S. Schwartz, eds., vol. 364, MRS, Pittsburgh, PA, 1995, pp. 137–44.
41. C. L. Fu and M. H. Yoo: Intermetallics, 1993, vol. 1, pp. 59-63.10.1016/0966-9795(93)90022-N ↗
42. A. Girshick and V. Vitek: in MRS Symp. Proc., vol. 364, J. Horton, I. Baker, S. Hanada, R.D. Noebe, and D.S. Schwartz, eds., MRS, Pittsburgh, PA, 1995, pp. 145–50.
43. J. D. H. Paul, F. Appel, and R. Wagner: Acta Mater., 1998, vol. 46, pp. 1075-85.10.1016/S1359-6454(97)00332-7 ↗
44. F. Appel, J. D. H. Paul and M. Oehring: Gamma Titanium Aluminide Alloys, Wiley-VCH Verlag & Co. KGaA; Weinheim, Germany, 2011.10.1002/9783527636204 ↗
45. F. Appel and R. Wagner: in Twinning in Advanced Systems, M.H. Yoo and M. Wuttig, eds., TMS, Warrendale, PA, 1994, pp. 317–30.
46. G.A. Salishchev, R.M. Imayev, V.M. Imayev, and M.R. Shagiev: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 595–602.
47. H. Clemens, H. Kestler, N. Eberhardt, and W. Knabl: in Gamma Titanium Aluminides 1999, Y.-W. Kim, D.M. Dimiduk, and M.H. Loretto, eds., TMS, Warrendale, PA, 1999, pp. 209–23.
48. 50.Y. Mishin and C. Herzig: Acta Mater., 2000, vol. 48, pp. 589–623.10.1016/S1359-6454(99)00400-0 ↗
49. R. W. Cahn: in High Temperature Aluminides and Intermetallics, S.H. Whang, C.T. Liu, D.P. Pope, and J.O. Stiegler, eds., TMS, Warrendale, PA, 1990, pp. 245–70.
50. H. Gleiter and B. Chalmers: Prog. Mater. Sci., 1972, vol. 16, pp. 127-78.10.1016/0079-6425(72)90022-9 ↗
51. W.-J. Zhang, U. Lorenz, and F. Appel: Acta Mater., 2000, vol. 48, pp. 2803-13.10.1016/S1359-6454(00)00093-8 ↗
52. Y. Umakoshi, T. Nakano, T. Takenaka, K. Sumimoto, and T. Yamane: Acta Metall. Mater., 1993, vol. 41, pp. 1149-54.10.1016/0956-7151(93)90162-L ↗
53. D. Munz and T. Fett: Mechanisches Verhalten keramischer Werkstoffe, 1989, Springer, Berlin.10.1007/978-3-642-51710-5 ↗
54. S. Chen, P. A. Beaven, R. Wagner: Scripta. Metall. Mater., 1992, vol. 26, pp. 1205-10.10.1016/0956-716X(92)90564-U ↗
55. U. Christoph, F. Appel, and R. Wagner: Mater. Sci. Eng. A, 1997, vol. 239-40, pp. 39-45.10.1016/S0921-5093(97)00558-3 ↗
56. F. Appel: Phil. Mag., 2005, vol. 85, pp. 205-31.10.1080/14786430412331315662 ↗
57. S.L. Draper, B.A. Lerch, I.E. Locci, M. Shazly, and V. Prakash: Intermetallics, 2005, vol. 13, pp. 1014-19.10.1016/j.intermet.2004.12.015 ↗
58. U.R. Kattner, J.-C. Lin, and Y.A. Chang: Metall. Trans. A, 1992, vol. 23A, pp. 2081-90.10.1007/BF02646001 ↗
59. G.L. Chen, W.J. Zhang, Z.C. Liu, S.J. Li, and Y.-W. Kim: in Gamma Titanium Aluminides 1999, Y.-W. Kim, D.M. Dimiduk, and M.H. Loretto, eds., TMS, Warrendale, PA, 1999, pp. 371–80.