journal article·2015-04Open access

Microstructure and Mechanical Properties of Ultra-fine-Grained Al-Mg-Si Tubes Produced by Parallel Tubular Channel Angular Pressing Process

G. Faraji, S. Roostae, A. Seyyed Nosrati, J. Y. Kang, H. S. Kim

Abstract

In the present work, commercial Al-6061 alloy tubes were processed via multi-pass parallel tubular channel angular pressing (PTCAP). The effects of the number of passes on grain refinement and mechanical properties were investigated. The microstructural evolution was characterized using electron back-scattered diffraction (EBSD) and scanning electron microscopy. The mechanical properties were evaluated using tensile tests and hardness measurements. The EBSD analyses presented that the elongated subgrains or grains with ~800 nm in size and a high fraction of low-angle grain boundaries were formed after two PTCAP passes. After four passes, the elongated subgrains have transformed to almost equiaxed grains with ~400 nm in size and high-angle grain boundaries. Microhardness of the processed tube increased from 38.9 to 63.4 HV (~63 pct) after three PTCAP passes. An increase in the number of PTCAP passes after three passes has no more effect on the microhardness. Yield and ultimate tensile strength were increased by 2.1 and 1.6 times, respectively, after four PTCAP passes (e ~6.4) compared to the annealed sample. Ductile fracture with an extensive necking zone and many big dimples occur in the annealed sample, while fine dimples and limited ductile fracture features were observed in the ultra-fine grained PTCAP-processed samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. R.Z. Valiev, R.K. Islamgaliev, I.V. Alexandrov, Progress in Materials Science, 45 (2000) 103-189.10.1016/S0079-6425(99)00007-9 ↗
2. K. Matsuki, T. Aida, T. Takeuchi, J. Kusui, K. Yokoe, Acta Materialia, 48 (2000) 2625-2632.10.1016/S1359-6454(00)00061-6 ↗
3. M.S. Soliman, E.A. El-Danaf, A.A. Almajid, Materials Science and Engineering: A, 532 (2012) 120-129.10.1016/j.msea.2011.10.072 ↗
4. Y. Chen, Y. Chai, H. Roven, S. Gireesh, Y. Yu, J. Hjelen, Materials Science and Engineering: A, 545 (2012) 139-147.10.1016/j.msea.2012.03.012 ↗
5. J. Zhang, K.-s. Zhang, H.-C. Wu, M.-h. Yu, Transactions of Nonferrous Metals Society of China, 19 (2009) 1303-1311.10.1016/S1003-6326(08)60442-2 ↗
6. M. Cabibbo, Materials Characterization, 61 (2010) 613-625.10.1016/j.matchar.2010.03.007 ↗
7. G. Faraji, P. Asadi, Materials Science and Engineering: A, 528 (2011) 2431-2440.10.1016/j.msea.2010.11.065 ↗
8. M. Reza Toroghinejad, F. Ashrafizadeh, R. Jamaati, M. Hoseini, and J.A. Szpunar, Mater. Sci. Eng. A, 2012, vol. 556, pp. 351–57.10.1016/j.msea.2012.06.098 ↗
9. M. Eizadjou, H.D. Manesh, K. Janghorban, Journal of Alloys and Compounds, 474 (2009) 406-415.10.1016/j.jallcom.2008.06.161 ↗
10. M.S. Mohebbi, A. Akbarzadeh, Materials Science and Engineering: A, 528 (2010) 180-188.10.1016/j.msea.2010.08.081 ↗
11. L.S. Tóth, M. Arzaghi, J.J. Fundenberger, B. Beausir, O. Bouaziz, R. Arruffat-Massion, Scripta Materialia, 60 (2009) 175-177.10.1016/j.scriptamat.2008.09.029 ↗
12. F. Djavanroodi, M. Daneshtalab, M. Ebrahimi, Materials Science and Engineering: A, 535 (2012) 115-121.10.1016/j.msea.2011.12.050 ↗
13. G. Faraji, A. Babaei, M.M. Mashhadi, K. Abrinia, Materials Letters, 77 (2012) 82-85.10.1016/j.matlet.2012.03.007 ↗
14. G. Faraji, M.M. Mashhadi, H.S. Kim, Materials Science and Engineering: A, 528 (2011) 4312-4317.10.1016/j.msea.2011.02.075 ↗
15. G. Faraji, M.M. Mosavi, H.S. Kim, Materials Transactions, 53 (2012) 8-12.10.2320/matertrans.MD201107 ↗
16. G. Faraji, M.M. Mashhadi, A.R. Bushroa, A. Babaei, Materials Science and Engineering: A, 563 (2013) 193-198.10.1016/j.msea.2012.11.065 ↗
17. G. Faraji, P. Yavari, S. Aghdamifar, and M.M. Mashhadi: J. Mater. Sci. Technol., 2014, vol. 30, pp. 134–38.10.1016/j.jmst.2013.08.010 ↗
18. M. Mesbah, G. Faraji, A.R. Bushroa, Materials Science and Engineering: A, 590 (2014) 289-294.10.1016/j.msea.2013.10.036 ↗
19. H.S. Kim, M.H. Seo, S.I. Hong, Journal of Materials Processing Technology, 113 (2001) 622-626.10.1016/S0924-0136(01)00710-5 ↗
20. Q. Jining, Z. Di, Z. Guoding, J.-C. Lee, Materials Science and Engineering: A, 408 (2005) 79-84.10.1016/j.msea.2005.08.128 ↗
21. A.S. Khan, C.S. Meredith, International Journal of Plasticity, 26 (2010) 189-203.10.1016/j.ijplas.2009.07.002 ↗
22. W.J. Kim, J.Y. Wang, Materials Science and Engineering: A, 464 (2007) 23-27.10.1016/j.msea.2007.03.074 ↗
23. M. Das, G. Das, M. Ghosh, M. Wegner, V. Rajnikant, S. GhoshChowdhury, T.K. Pal, Materials Science and Engineering: A, 558 (2012) 525-532.10.1016/j.msea.2012.08.040 ↗
24. A. Loucif, R.B. Figueiredo, T. Baudin, F. Brisset, T.G. Langdon, Materials Science and Engineering: A, 527 (2010) 4864-4869.10.1016/j.msea.2010.04.027 ↗
25. S.H. Lee, Y. Saito, T. Sakai, H. Utsunomiya, Materials Science and Engineering: A, 325 (2002) 228-235.10.1016/S0921-5093(01)01416-2 ↗
26. M.R. Rezaei, M.R. Toroghinejad, F. Ashrafizadeh, Journal of Materials Processing Technology, 211 (2011) 1184-1190.10.1016/j.jmatprotec.2011.01.023 ↗
27. M.R. Rezaei, M.R. Toroghinejad, F. Ashrafizadeh, Materials Science and Engineering: A, 529 (2011) 442-446.10.1016/j.msea.2011.09.057 ↗
28. G. Faraji, M.M. Mashhadi, H.S. Kim, Materials Letters, 65 (2011) 3009-3012.10.1016/j.matlet.2011.06.039 ↗
29. T.G. Langdon, Materials Science and Engineering: A, 462 (2007) 3-11.10.1016/j.msea.2006.02.473 ↗
30. F. Salimyanfard, M. Reza Toroghinejad, F. Ashrafizadeh, M. Jafari, Materials Science and Engineering: A, 528 (2011) 5348-5355.10.1016/j.msea.2011.03.075 ↗
31. C. Xu, M. Furukawa, Z. Horita, T.G. Langdon, Acta Materialia, 51 (2003) 6139-6149.10.1016/S1359-6454(03)00433-6 ↗
32. Y. Tham, M. Fu, H. Hng, Q. Pei, K. Lim, Materials and Manufacturing Processes, 22 (2007) 819-824.10.1080/10426910701446754 ↗
33. S.H. Lee, Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai, Scripta Materialia, 46 (2002) 281-285.10.1016/S1359-6462(01)01239-8 ↗
34. R.Z. Valiev, E.V. Kozlov, Y.F. Ivanov, J. Lian, A.A. Nazarov, B. Baudelet, Acta Metallurgica et Materialia, 42 (1994) 2467-2475.10.1016/0956-7151(94)90326-3 ↗
35. K.S. Raju, M.G. Krishna, K.A. Padmanabhan, K. Muraleedharan, N.P. Gurao, G. Wilde, Materials Science and Engineering: A, 491 (2008) 1-7.10.1016/j.msea.2007.11.072 ↗
36. Q.D. Wang, Y.J. Chen, J.B. Lin, L.J. Zhang, C.Q. Zhai, Materials Letters, 61 (2007) 4599-4602.10.1016/j.matlet.2007.02.067 ↗
37. C. Chang, P. Sun, P. Kao, Acta Materialia, 48 (2000) 3377-3385.10.1016/S1359-6454(00)00138-5 ↗
38. Z. Marciniak, J.L. Duncan, S.J. Hu, Mechanics of Sheet Metal Forming, Butterworth-Heinemann, Oxford 2002.