Effect of prestrain on the ductile fracture behavior of an interstitial-free steel
Source abstract
Abstract
The effect of tensile prestrain on the ductile fracture behavior of an interstitial-free (IF) steel has been studied using primarily (1) the analysis of void density by optical microscopy, (2) characterization of the size of dimples by scanning electron microscope (SEM) and image analyzer, and (3) estimation of strain hardening behavior of a series of prestrained tensile specimens, loaded until fracture. The variation of void density with local plastic strain around the necked region of the specimens indicated the existence of two types of void nucleation pertaining to inclusions and precipitate particles. The critical strain for void nucleation (e{inn}) for the precipitate particles initially increases and then decreases with the increase in percentage prestrain. This phenomenon has been explained using the strain hardening exponent and nature of dislocation-particle interaction. The nature of variation of the average size of the dimples and that of e{inn} with prestrain are found to be similar. The dimple size thus bears a proportional relationship with the void, nucleation strain e{inn} and hence the former can be used to predict (e{inn}) for IF steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Y. Tokunaga and H. Kato: in Metallurgy of Vacuum Degassed Steel Products, R. Pradhan, ed., TMS, Warrendale, PA, 1990, pp. 91–108.
2. N. Narasaiah: Ph.D. Thesis, Indian Institute of Technology, Kharagpur, India. 2004.
3. H.P. Ganser, E.A. Werner, and F.D. Fischer: Int. J. Plast., 1998, vol. 14, pp. 789–803.10.1016/S0749-6419(98)00023-0 ↗
4. S. Sivaprasad, S. Tarafder, V.R. Ranganath, and K.K. Ray: Mater. Sci. Eng., A, 2000 vol. 284, pp. 195–201.10.1016/S0921-5093(00)00739-5 ↗
5. G. Straffelini: Mater. Sci. Eng., A, 2003 vol. 342, pp. 251–57.10.1016/S0921-5093(02)00308-8 ↗
6. L. Zhou: Eng. Fract. Mech., 1995 vol. 51, pp. 205–08.10.1016/0013-7944(94)00248-G ↗
7. J. Arndt and W. Dahl: Comput. Mater. Sci., 1997 vol. 9, pp. 1–6.10.1016/S0927-0256(97)00052-9 ↗
8. R. Schiffmann, W. Bleck, and W. Dahl: Comput. Mater. Sci., 1998, vol. 13, pp. 142–47.10.1016/S0927-0256(98)00054-8 ↗
9. S. Dhar, R. Sethuraman, and P.M. Dixit: Eng. Fract. Mech., 1996 vol. 53, pp. 917–28.10.1016/0013-7944(95)00151-4 ↗
10. H. Agarwal, A.M. Gokhale, S. Graham and M.F. Horstemeyer: Mater. Sci. Eng., A, 2003 vol. 341, pp. 35–42.10.1016/S0921-5093(02)00073-4 ↗
11. R. Schiffmann, J. Heyer, and W. Dahl: Eng. Fract. Mech., 2003 vol. 70, pp. 543–51.10.1016/S0013-7944(02)00151-0 ↗
12. M. Rakin, Z. Cvijovic, V. Grabulov, S. Putic, and A. Sedmak: Eng. Fract. Mech., 2003 vol. 71, pp. 813–27.10.1016/S0013-7944(03)00013-4 ↗
13. Z.F. Yue and C.Q. Zheng: Theor. Appl. Fract. Mech., 1995 vol. 22, pp. 139–50.10.1016/0167-8442(94)00054-5 ↗
14. A.S. Argon, J. Im, and A. Needleman: Metall. Trans. A, 1975 vol. 6, pp. 815–24.10.1007/BF02672305 ↗
15. A.S. Argon and J. Im: Metall. Trans. A, 1975 vol. 6, pp. 839–51.10.1007/BF02672307 ↗
16. T. Inoue and S. Kinoshita: Trans. Iron Steel Inst. Jpn., 1977 vol. 17. pp. 523–31.10.2355/isijinternational1966.17.523 ↗
17. G. Le Roy, J.D. Embury, G. Edwards, and M.F. Ashby: Acta Metall., 1981 vol. 29, pp. 1509–22.10.1016/0001-6160(81)90185-1 ↗
18. D. Kwon and R. Asaro: Metall. Trans. A, 1990 vol. 21, pp. 117–34.10.1007/BF02656430 ↗
19. P.B. Hirsch and F.J. Humphreys: Proc. R. Soc.(A), 1970 vol. 318. pp. 45–72.10.1098/rspa.1970.0133 ↗
20. I.C. Lindley, T. Oates, and C.E. Richards: Acta Metall., 1970 vol. 18, pp. 1127–36.10.1016/0001-6160(70)90103-3 ↗
21. L.M. Brown and W.M. Stobbs: Philos. Mag., 1976 vol. 34, pp. 351–72.10.1080/14786437608222028 ↗
22. Microscopic Testing Method for the Non-Metallic Inclusions of Steels, Japanese Standard JISG-0555, 1992.
23. Standard Test Method for Determining Average Grain Size, ASTM Designation E-112-96, ASTM, Philadelphia, PA, 2004, pp. 267–92.
24. Standard Test Methods for Tension Testing of Metallic Materials [Metric] ASTM Designation E 8M-04, ASTM, Philadelphia, PA, 2004, pp. 86–109.
25. E.E. Underwood: J. Met., 1986 vol. 38, pp. 30–32.
26. ASM Handbook, vol. 12. Fractography, 9th ed., ASM INTER-NATIONAL, Metals Park, OH, 1999, pp. 193–210.
27. J.F.C. Lins and H.R.Z. Sandim: Acta Microscopica, 2003 vol. 12, pp. 273–74.
28. I. Gupta and D. Bhattacharya: in Metallurgy of Vacuum Degassed Steel Products, R. Pradhan, ed., TMS, Warrendale, PA, 1990, pp. 43–72.
29. F.H. Samuel, S. Yue, and J.J. Jonas: in Metallurgy of Vacuum Degassed Steel Products, R. Pradhan, ed., TMS, Warrendale, PA, 1990, pp. 395–413.
30. M.N. Bassim and M.R. Bayoumi: Mater. Sci. Eng., 1986 vol. 81, pp. 317–24.10.1016/0025-5416(86)90271-5 ↗
31. R. Sandstorm, G. Engberg, and Y. Bergstorm: Met. Sci., 1981 vol. 15A, pp. 409–12.10.1179/030634581790426859 ↗
32. P.K. Liaw and J.D. Landes: Metall. Trans. A, 1986 vol. 17, pp. 473–89.10.1007/BF02643954 ↗
33. K.F. Amouzouvi: Mater. Sci. Eng., 1986 vol. 78, pp. 65–70.10.1016/0025-5416(86)90080-7 ↗
34. Q.Z. Chen and B.J. Duggan: Metall. Mater. Trans. A., 2004 vol. 35, pp. 3423–30.10.1007/s11661-004-0178-5 ↗
35. D. Kuhlmann-Wilsdorf: Trans. TMS-AIME, 1962 vol. 224, pp. 1047–61.
36. N.S. Mishra, S. Mishra, and V. Ramaswamy: Metall. Trans. A., 1989, vol. 20, pp. 2819–929.10.1007/BF02670174 ↗
37. R.E. Reed-Hill, W.R. Cribb, and S.W. Monteiro: Metall. Trans. A., 1973 vol. 4, pp. 2665–67.10.1007/BF02644276 ↗
38. C.H. Crussard and B. Jaoul: Rev. Metall., 1950 vol. 47, pp. 589–600.10.1051/metal/195047080589 ↗
39. M. Umemoto, Z.G. Liu, S. Sugimoto, and K. Tsuchiya: Metall. Mater. Trans. A, 2000 vol. 31, pp. 1785–94.10.1007/s11661-006-0249-x ↗
40. D.A. Korzekwa, D.K. Matlok, and G. Krauss: Metall. Trans. A., 1984, vol. 15, pp. 1221–28.10.1007/BF02644716 ↗
41. Y. Tomita and K. Okabayashi: Metall. Trans. A., 1985 vol. 16, pp. 865–72.10.1007/BF02814837 ↗
42. M.N. Bassim: Mater. Sci. Eng., A., 1989 vol. 113, pp. 367–71.10.1016/0921-5093(89)90323-7 ↗
43. X.F. Fang and W. Dahl: Mater. Sci. Eng., A., 1995 vol. 203, pp. 14–25.10.1016/0921-5093(95)09841-0 ↗
44. D. Chakraborty: Master’s Thesis, Indian Institute of Technology, Kharagpur, India, 2000.