Synthesis of Magnesium Borates by Mechanically Activated Annealing
Source abstract
Abstract
Different magnesium borate compounds such as MgB4O7, Mg2B2O5, and Mg3B2O6 were synthesized from B2O3/MgO powder blends by mechanically activated annealing (M2A). Milling experiments were carried out in a SPEX 8000 D Mixer/Mill, and mechanically activated powders were subsequently annealed under air. The effects of B2O3/MgO mole ratios (1/1, 1/2, 1/3, and 2/1), milling durations (30 minutes and 1 and 2 hours), annealing durations (2 and 5 hours), and annealing temperatures (973 K, 1173 K, and 1273 K (700 °C, 900 °C, and 1000 °C)) on the formation and microstructure of magnesium borates were investigated. Compositional, microstructural, and thermal characterizations were conducted by X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Temperature-product mole amount relations of the B2O3/MgO powder blends were interpreted by thermochemical software. MgB4O7 and Mg2B2O5 crystalline phases were identified in the M2A’d powders in the B2O3/MgO mole ratios of 1/1, 1/2, and 2/1. Mg2B2O5 and Mg3B2O6 crystalline phases were detected in the M2A’d B2O3/MgO: 1/3 powders in addition to unreacted MgO.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Crystal Structures and Properties · Bone Tissue Engineering Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Y. Li, Z. Fan, J.G. Lu, and R.P.H. Chang: Chem. Mater., 2004, vol. 16, pp. 2512–14.10.1021/cm0496366 ↗
2. A.F. Qasrawi, T.S. Kayed, A. Mergen, and M. Gürü: Res. Bull., 2005, vol. 40, pp. 583–89.10.1016/j.materresbull.2005.02.002 ↗
3. J. Zhang, Z. Li, and B. Zhang: Mater. Chem. Phys., 2006, vol. 98, pp. 195–97.10.1016/j.matchemphys.2005.08.059 ↗
4. X. Tao and X. Li: Nano Lett., 2008, vol. 8, pp. 505–10.10.1021/nl072678j ↗
5. S. Li, X. Fang, J. Leng, H. Shen, Y. Fan, and D. Xu: Mater. Lett., 2010, vol. 64, pp. 151–53.10.1016/j.matlet.2009.10.029 ↗
6. E.M. Elssfah, A. Elsanousi, J. Zhang, H.S. Song, and C. Tang: Mater. Lett., 2007, vol. 61, pp. 4358–61.10.1016/j.matlet.2007.02.002 ↗
7. Y. Zeng, H. Yang, W. Fu, L. Qiao, L. Chang, J. Chen, H. Zhu, M. Li, and G. Zou: Mater. Res. Bull., 2008, vol. 43, pp. 2239–47.10.1016/j.materresbull.2007.08.022 ↗
8. W. Zhu, Q. Zhang, L. Xiang, F. Wei, X. Sun, X. Piao, and S. Zhu: Cryst. Growth Des., 2008, vol. 8, pp. 2938–45.10.1021/cg800050u ↗
9. H.M. Davis and M.A. Knight: J. Am. Ceram. Soc., 1945, vol. 28, pp. 97–102.10.1111/j.1151-2916.1945.tb14519.x ↗
10. S. Miyagawa, S. Hirano, and S. Somiya: Bull. Tokyo Inst. Technol., 1972, vol. 108, pp. 33–42.
11. J.W. Jiang, L. Wang, Q. Yang, and D.R. Yang: J. Inorg. Mater., 2006, vol. 21, pp. 833–37.
12. J. Zhang and Y.M. Zhao: Acta Phys. Chim. Sin., 2006, vol. 22, pp. 110–13.10.3866/PKU.WHXB20060122 ↗
13. A. Obut: J. Alloys Compd., 2008, vol. 457, pp. 86–89.10.1016/j.jallcom.2007.03.018 ↗
14. B. Xu, T. Li, Y. Zhang, Z. Zhang, X. Liu, and J. Zhao: Cryst. Growth Des., 2008, vol. 8, pp. 1218–22.10.1021/cg700690g ↗
15. M. Körük and I. Girgin: J. Non-Cryst. Solids, 2009, vol. 355, pp. 965–69.10.1016/j.jnoncrysol.2009.04.021 ↗
16. R. Ma, Y. Bando, D. Golberg, and T. Sato: Angew. Chem. Int. Ed., 2003, vol. 42, pp. 1836–38.10.1002/anie.200250455 ↗
17. K. Sakane, T. Kitamura, H. Wada, and M. Suzue: Adv. Powder Technol., 1992, vol. 3, pp. 39–46.10.1016/S0921-8831(08)60687-1 ↗
18. W. Zhu, L. Xiang, Q. Zhang, X. Zhang, L. Hu, and S. Zhu: J. Cryst. Growth, 2008, vol. 310, pp. 4262–67.10.1016/j.jcrysgro.2008.06.072 ↗
19. A. Üçyıldız and İ. Girgin: Cent. Eur. J. Chem., 2010, vol. 8, pp. 758–65.10.2478/s11532-010-0039-6 ↗
20. U. Došler, M.M. Kržmanc, and D. Suvorov: J. Eur. Ceram. Soc., 2010, vol. 30, pp. 413–18.10.1016/j.jeurceramsoc.2009.05.049 ↗
21. C. Suryanarayana: Prog. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
22. E. Gaffet and N. Malhouroux-Gaffet: J. Alloys Compd., 1994, vol. 205, pp. 27–34.10.1016/0925-8388(94)90760-9 ↗
23. V. Gauthier, C. Josse, F. Bernard, E. Gaffet, and J.P. Larpin: Mater. Sci. Eng. A-Struct., 1999, vol. 265, pp. 117–28.10.1016/S0921-5093(98)01141-1 ↗
24. E. Gaffet and F. Bernard: Ann. Chim. Sci. Mater., 2002, vol. 27, pp. 47–59.10.1016/S0151-9107(02)90014-0 ↗
25. M.S. Archana, N. Hebalkar, K. Radha, and J. Joardar: J. Alloys Compd., 2010, vol. 501, pp. 18–24.10.1016/j.jallcom.2010.04.046 ↗
26. B. Bokhonov, Y. Borisova, and M. Korchagin: Carbon, 2004, vol. 42, pp. 2067–71.10.1016/j.carbon.2004.04.016 ↗
27. E. Barraud, S. Bégin-Colin, and G. Le Caër: J. Alloys Compd., 2005, vol. 398, pp. 208–18.10.1016/j.jallcom.2005.02.011 ↗
28. A.A. Kern and A.A. Coelho: Bruker-AXS TOPAS V.3.0, 2006, www.brukeraxs.com.
29. FACTSAGE 6.2 Thermochemical Software for Windows, Thermfact and GTT-Technologies, Center for Research in Computational Thermochemistry, Montreal, Canada, 2009, www.factsage.com.
30. D.R. Askeland: The Science and Engineering of Materials, 3rd ed., Wadsworth Publishing, Belmont, CA, 1994, pp. 291–313.