Atomic-Scale Study of Plastic-Yield Criterion in Nanocrystalline Cu at High Strain Rates
Source abstract
Abstract
Large-scale molecular dynamics (MD) simulations are used to understand the macroscopic yield behavior of nanocrystalline Cu with an average grain size of 6 nm at high strain rates. The MD simulations at strain rates varying from 109 s−1 to 8 × 109 s−1 suggest an asymmetry in the flow stress values in tension and compression, with the nanocrystalline metal being stronger in compression than in tension. The tension-compression strength asymmetry is very small at 109 s−1, but increases with increasing strain rate. The calculated yield stresses and flow stresses under combined biaxial loading conditions (X-Y) gives a locus of points that can be described with a traditional ellipse. An asymmetry parameter is introduced that allows for the incorporation of the small tension-compression asymmetry. The biaxial yield surface (X-Y) is calculated for different values of stress in the Z direction, the superposition of which gives a full three-dimensional (3-D) yield surface. The 3-D yield surface shows a cylinder that is symmetric around the hydrostatic axis. These results suggest that a von Mises-type yield criterion can be used to understand the macroscopic deformation behavior of nanocrystalline Cu with a grain size in the inverse Hall–Petch regime at high strain rates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. K.J. Hemker: Science, 2004, vol. 304, pp. 221–23.10.1126/science.1097058 ↗
2. V. Yamakov, D. Wolf, S.R. Phillpot, A.K. Mukherjee, and H. Gleiter: Nat. Mater., 2002, vol. 1, pp. 45–49.10.1038/nmat700 ↗
3. V. Yamakov, D. Wolf, M. Salazar, S.R. Phillpot, and H. Gleiter: Acta Mater., 2001, vol. 49, pp. 2713–22.10.1016/S1359-6454(01)00167-7 ↗
4. H. Van Swygenhoven, M. Spaczer, and A. Caro: Acta Mater., 1999, vol. 47, pp. 3117–26.10.1016/S1359-6454(99)00109-3 ↗
5. H. Van Swygenhoven and P.M. Derlet: Phys. Rev. B, 2001, vol. 64, p. 224105.10.1103/PhysRevB.64.224105 ↗
6. P.M. Derlet and H. Van Swygenhoven: Scripta Mater., 2002, vol. 47, pp. 719–24.10.1016/S1359-6462(02)00182-3 ↗
7. A. Hasnaoui, H. Van Swygenhoven, and P.M. Derlet: Phys. Rev. B, 2002, vol. 66, p. 184112.10.1103/PhysRevB.66.184112 ↗
8. H. Van Swygenhoven, M. Spaczer, A. Caro, and D. Farkas: Phys. Rev. B, 1999, vol. 60, pp. 22–25.10.1103/PhysRevB.60.22 ↗
9. D.W. Brenner: Computer Modeling of Nanostructured Materials, 2nd ed., Carl Koch, ed., Noyes Publications, Norwich, NY, 2006.
10. G.F. Dieter: Mechanical Metallurgy, 3rd ed., McGraw Hill, New York, NY, 1986.
11. H. Van Swygenhoven: Science, 2002, vol. 296, pp. 66–67.10.1126/science.1071040 ↗
12. J. Schiotz and K.W. Jacobsen: Science, 2003, vol. 301, pp. 1357–59.10.1126/science.1086636 ↗
13. V. Yamakov, D. Wolf, S.R. Phillpot, A.K. Mukherjee, and H. Gleiter: Philos. Mag. Lett., 2003, vol. 83, pp. 385–93.10.1080/09500830031000120891 ↗
14. K.S. Kumar, H. Van Swygenhoven, and S. Suresh: Acta Mater., 2003, vol. 51, pp. 5743–44.10.1016/j.actamat.2003.08.032 ↗
15. D. Wolf, V. Yamakov, S.R. Phillpot, A. Mukherjee, and H. Gleiter: Acta Mater., 2005, vol. 53, pp. 1–40.10.1016/j.actamat.2004.08.045 ↗
16. D. Jia, K.T. Ramesh, E. Ma, L. Lu, and K. Lu : Scripta Mater., 2001, vol. 45, pp. 613–20.10.1016/S1359-6462(01)01071-5 ↗
17. E.M. Bringa, A. Caro, Y. Wang, M. Victoria, J.M. McNaney, B.A. Remington, R.F. Smith, B.R. Torralva, and H. Van Swygenhoven: Science, 2005, vol. 309, pp. 1838–41.10.1126/science.1116723 ↗
18. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 4th ed., Wiley & Sons, New York, NY, 1996.
19. T.H. Courtney: Mechanical Behavior of Materials, McGraw-Hill, New York, NY, 1990.
20. N.Q. Vo, R.S. Averback, P. Bellon, S. Odunuga, and A. Caro: Phys. Rev. B, 2008, vol. 77, p. 134108.10.1103/PhysRevB.77.134108 ↗
21. A.C. Lund, T.G. Nieh, and C.A. Schuh: Phys. Rev. B, 2004, vol. 69, p. 012101.10.1103/PhysRevB.69.012101 ↗
22. A.C. Lund and C.A. Schuh: Acta Mater., 2003, vol. 51, pp. 5399–5411.10.1016/S1359-6454(03)00396-3 ↗
23. C.A. Schuh and A.C. Lund: Nat. Mater., 2003, vol. 2, pp. 449–52.10.1038/nmat918 ↗
24. A.C. Lund and C.A. Schuh: Acta Mater., 2005, vol. 53, pp. 3193–3205.10.1016/j.actamat.2005.03.023 ↗
25. E. Moshe, S. Eliezer, E. Dekel, A. Ludmirsky, Z. Henis, M. Werdiger, I.B. Goldberg, N. Eliaz, and D. Eliezer: J. Appl. Phys., 1998, vol. 83, pp. 4004–11.10.1063/1.367222 ↗
26. G.I. Kanel, S.V. Razorenov, A.V. Utkin, V.E. Fortov, K. Baumung, H.U. Karow, D. Rusch, and V. Licht: J. Appl. Phys., 1993, vol. 74, pp. 7162–65.10.1063/1.355032 ↗
27. S. Eliezer, I. Gilath, and T. Bar-Noy: J. Appl. Phys., 1990, vol. 67, pp. 715–24.10.1063/1.345777 ↗
28. H. Tamura, T. Kohama, K. Kondo, and M. Yoshida: J. Appl. Phys., 2001, vol. 89, pp. 3520–22.10.1063/1.1346996 ↗
29. E. Moshe, S. Eliezer, E. Dekel, Z. Henis, A. Ludmirsky, I.B. Goldberg, and D. Eliezer: J. Appl. Phys., 1999, vol. 86, pp. 4242–48.10.1063/1.371352 ↗
30. P.M. Derlet and H. Van Swygenhoven: Phys. Rev. B, 2003, vol. 67, p. 014202.10.1103/PhysRevB.67.014202 ↗
31. S. Kumar, S.K. Kurtz, J.R. Banavar, and M.G. Sharma: J. Stat. Phys., 1992, vol. 67, pp. 523–51.10.1007/BF01049719 ↗
32. C.L. Kelchner, S.J. Plimpton, and J.C. Hamilton: Phys. Rev. B., 1998, vol. 58, pp. 11085–88.10.1103/PhysRevB.58.11085 ↗
33. A.F. Voter: in Intermetallic Compounds: Principles and Practice, J.H. Westbrook and R.L. Fleischer, eds., Wiley & Sons, New York, NY, 1994, vol. 1, p. 77.
34. J.A. Zimmerman, H. Gao, and F.F. Abraham: Modell. Simul. Mater. Sci. Eng., 2000, vol. 8, pp. 103–15.10.1088/0965-0393/8/2/302 ↗