Effect of Carbon Reduction on the Toughness of 9CrWVTaN Steels
Source abstract
Abstract
Nitride-strengthened, reduced activation, martensitic steel is anticipated to have higher creep strength because of the remarkable thermal stability of nitrides. Two nitride-strengthened, reduced activation martensitic steels with different carbon contents were prepared to investigate the microstructure and mechanical property changes with decreasing carbon content. It has been found that both steels had the microstructure of full martensite with fine nitrides dispersed homogeneously in the matrix and displayed extremely high strength but poor toughness. Compared with the steel with low carbon content (0.005 pct in wt pct), the steel with high carbon content (0.012 pct in wt pct) had not only the higher strength but also the higher impact toughness and grain coarsening temperature, which was related to the carbon content. On the one hand, carbon reduction led to Ta-rich inclusions; on the other hand, the grain grew larger when normalized at high temperature because of the absence of Ta carbonitrides, which would decrease impact toughness. The complicated Al2O3 inclusions in the two steels have been revealed to be responsible for the initiated cleavage fracture by acting as the critical cracks.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Fusion materials and technologies · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. C. Hu, J. Yu, and F. Wan: Nucl. Sci. Eng., 2004, vol. 24, no. 1, pp. 56–64.
2. K. Maruyama, K. Sawada, and J. Koike: ISIJ Int., 2001, vol. 41, pp. 641–53.10.2355/isijinternational.41.641 ↗
3. Å. Gustafson and J. Ågren: ISIJ Int., 2001, vol. 41, pp. 356–60.10.2355/isijinternational.41.356 ↗
4. V. de Castro, T. Leguey, A. Muñoz, M.A. Monge, P. Fernández, A.M. Lancha, and R. Pareja: J. Nucl. Mater., 2007, vols. 367–370, pp. 196–201.10.1016/j.jnucmat.2007.03.146 ↗
5. P. Olier, A. Bougault, A. Alamo, Y. de Carlan. (2009) J. Nucl. Mater. 386–388:561–63.10.1016/j.jnucmat.2008.12.177 ↗
6. M. Klimenkov, R. Lindau, and A. Moslang: J. Nucl. Mater., 2009, vols. 386–388, pp. 553–56.10.1016/j.jnucmat.2008.12.174 ↗
7. R. Lindau, A. Möslang, M. Rieth, M. Klimiankou, E. Materna-Morris, A. Alamo, A.-A.F. Tavassoli, C. Cayron, A.-M. Lancha, P. Fernandez, N. Baluc, R. Schäublin, E. Diegele, G. Filacchioni, J.W. Rensman, B.V.D. Schaaf, E. Lucon, and W. Dietz: Fusion Eng. Des., 2005, vols. 75–79, pp. 989–96.10.1016/j.fusengdes.2005.06.186 ↗
8. R.J. Kurtz, A. Alamo, E. Lucon, Q. Huang, S. Jitsukawa, A. Kimura, R.L. Klueh, G.R. Odette, C. Petersen, M.A. Sokolov, P. Spätig, and J.-W. Rensman: J. Nucl. Mater., 2009, vol. 386–388, pp. 411–17.10.1016/j.jnucmat.2008.12.323 ↗
9. R. Schaeublin, T. Leguey, P. Spätig, N. Baluc, and M. Victoria: J. Nucl. Mater., 2002, vol. 307–311, pp. 778–82.10.1016/S0022-3115(02)01193-5 ↗
10. G. Yu, N. Nita, and N. Baluc: Fusion Eng. Des., 2005, vol. 75–79, pp. 1037–41.10.1016/j.fusengdes.2005.06.311 ↗
11. Q. Yong: The Second Phase in Steels, Metallurgical Industry Press, Beijing, China, 2006.
12. M. Taneike, F. Abe, and K. Sawada: Nature, 2003, vol. 424, pp. 294–96.10.1038/nature01740 ↗
13. F. Abe, M. Taneike, and K. Sawada: Pres. Ves. Pip., 2007, vol. 84, pp. 3–12.10.1016/j.ijpvp.2006.09.003 ↗
14. J. Hald and S. Straub: Proc. Sixth Liege Conference, Materials for Advanced Power Engineering, Jülich, 1998, J. Lecomte-Beckers, F. Schubert, and P.J. Ennis, eds., Schriften des Forschungszentrum Jülich-Reihe Energietechnik, Jülich 1998, p. 155.
15. M. Taneike, K. Sawada, and F. Abe: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1255–62.10.1007/s11661-004-0299-x ↗
16. P. Hu, W. Yan, L.-F. Deng, W. Sha, Y.-Y. Shan, and K. Yang: Fusion Eng. Des., 2010, vol. 85, pp. 1632–37.10.1016/j.fusengdes.2010.04.066 ↗
17. S.H. Ryu, Y.S. Lee, B.O. Kong, J.T. Kim, D.H. Kwak, S.W. Nam, and B. Vandenberghe: Proc. 3rd Int. Conf. on Advanced Structural Steels, Gyeongju, Korea, 2006, pp. 563–69.
18. M. Yoshizawa and M. Igarashi: Pres. Ves. Pip., 2007, vol. 84, pp. 37–43.10.1016/j.ijpvp.2006.09.005 ↗
19. K.W. Tupholme, D. Dulieu, and G.J. Butterworth: J. Nucl. Mater., 1988, vol. 155–157, pp. 650–55.10.1016/0022-3115(88)90389-3 ↗
20. K.W. Tupholme, D. Dulieu, and G.J. Butterworth: J. Nucl. Mater., 1991, vol. 179–181, pp. 684–88.10.1016/0022-3115(91)90181-6 ↗
21. K. Ehrlich, S. Kelzenberg, H.-D. Röhrig, L. Schäfer, and M. Schirra: J. Nucl. Mater., 1994, vol. 212–215, pp. 678–83.10.1016/0022-3115(94)90144-9 ↗
22. A. Kohyama, A. Hishinuma, D.S. Gelles, R.L. Klueh, W. Dietz, and K. Ehrlich: J. Nucl. Mater., 1996, vol. 233–237, pp. 138–47.10.1016/S0022-3115(96)00327-3 ↗
23. B. van der Schaaf, D.S. Gelles, S. Jitsukawa, A. Kimura, R.L. Klueh, A. Moslang, and G.R. Odette: J. Nucl. Mater., 2000, vol. 283–287, pp. 52–59.10.1016/S0022-3115(00)00220-8 ↗
24. R.L. Klueh, D.S. Gelles, S. Jitsukawa, A. Kimura, G.R. Odette, B. van der Schaaf, and M. Victoria: J. Nucl. Mater., 2002, vol. 307–311, pp. 455–65.10.1016/S0022-3115(02)01082-6 ↗
25. S. Jitsukawa, M. Tamura, B. van der Schaaf, R.L. Klueh, A. Alamo, C. Petersen, M. Schirra, P. Spaetig, G.R. Odette, A.A. Tavassoli, K. Shiba, A. Kohyama, A. Kimura. (2002) J. Nucl. Mater. 307–311:179–86.10.1016/S0022-3115(02)01075-9 ↗
26. N. Baluc, K. Abe, J.L. Boutard, V.M. Chernov, E. Diegele, S. Jitsukawa, A. Kimura, R.L. Klueh, A. Kohyama, R.J. Kurtz, R. Lasser, H. Matsui, A. Moslang, T. Muroga, G.R. Odette, M.Q. Tran, B. van der Schaaf, Y. Wu, J. Yu, S.J. Zinkle (2007) Nucl. Fusion 47:S696–717.10.1088/0029-5515/47/10/S18 ↗
27. R.L. Klueh, E.T. Cheng, M.L. Grossbeck, and E.E. Bloom: J. Nucl. Mater., 2000, vol. 280, pp. 353–59.10.1016/S0022-3115(00)00060-X ↗
28. A. Hishinuma, A. Kohyama, R.L. Klueh, D.S. Gelles, W. Dietz, and K. Ehrlich: J. Nucl. Mater., 1998, vol. 258–263, pp. 193–204.10.1016/S0022-3115(98)00395-X ↗
29. N. Baluc: Phys. Scripta, 2009, vol. T138, p. 014004.10.1088/0031-8949/2009/T138/014004 ↗
30. S. Jitsukawa, K. Suzuki, N. Okubo, M. Ando, and K. Shiba: Nucl. Fusion, 2009, vol. 49, p. 115006.10.1088/0029-5515/49/11/115006 ↗
31. R.L. Klueh: J. Nucl. Mater., 2008, vol. 378, pp. 159–66.10.1016/j.jnucmat.2008.05.010 ↗
32. C.P.C. Wong, J.-F. Salavy, Y. Kim, I. Kirillov, E. Rajendra Kumar, N.B. Morley, S. Tanaka, and Y.C. Wu (2008) Fusion Eng. Des. 83: 850–57.10.1016/j.fusengdes.2008.06.040 ↗
33. S. Saroja, A. Dasgupta, R. Divakar, S. Raju, E. Mohandas, M. Vijayalakshmi, K.B.S. Rao, and B. Raj: J. Nucl. Mater., 2011, vol. 409, pp. 131–39.10.1016/j.jnucmat.2010.09.022 ↗
34. R.L. Klueh, N. Hashimoto, and P.J. Maziasz: J. Nucl. Mater., 2007, vol. 367–370, pp. 48–53.10.1016/j.jnucmat.2007.03.001 ↗
35. Y. de Carlan, M. Murugananth, T. Sourmail, H.K.D.H. Bhadeshia (2004) J. Nucl. Mater. 329–333: 238–42.10.1016/j.jnucmat.2004.04.017 ↗
36. G. Poulachon, M. Dessoly, J.L. Lebrun, C. Le Calvez, V. Prunet, I.S. Jawahir (2002) Wear 253: 339–56.10.1016/S0043-1648(02)00122-9 ↗
37. L. Zhang and B.G. Thomas: ISIJ Int., 2003, vol. 43, pp. 271–91.10.2355/isijinternational.43.271 ↗
38. R.L. Klueh: Int. Mater. Rev., 2005, vol. 50, pp. 287–310.10.1179/174328005X41140 ↗
39. B. Weiss and R. Stickler: Metall. Trans., 1972, vol. 3, pp. 851–66.10.1007/BF02647659 ↗
40. T. Gladman: Proc. Royal Soc. A, 1966, vol. 294, pp. 298–309.10.1098/rspa.1966.0208 ↗
41. D.J. Abson and R.J. Pargeter: Int. Met. Rev., 1986, vol. 31, pp. 141–96.10.1179/095066086790324302 ↗
42. H.J. Jun, J.S. Kang, D.H. Seo, K.B. Kang, and C.G. Park: Mater. Sci. Eng. A, 2006, vol. 422, pp. 157–62.10.1016/j.msea.2005.05.008 ↗
43. K. Sawada, M. Taneike, K. Kimura, and F. Abe: ISIJ Int., 2004, vol. 44, pp. 1243–49.10.2355/isijinternational.44.1243 ↗
44. J. Rawers and M. Grujicic: Mater. Sci. Eng. A, 1996, vol. 207, pp. 188–94.10.1016/0921-5093(95)10031-8 ↗
45. P.D. Hodgson, M.R. Hickson, and R.K. Gibbs: Mater. Sci. Forum, 1998, vol. 284–286, pp. 63–72.10.4028/www.scientific.net/MSF.284-286.63 ↗
46. W. Yan, Y.Y. Shan, and K. Yang: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1211–22.10.1007/s11661-007-9161-2 ↗
47. Z.R. Hesabi, A. Simchi, and S.M.S. Reihani: Mater. Sci. Eng. A, 2006, vol. 428, pp. 159–68.10.1016/j.msea.2006.04.116 ↗
48. Ş. Yılmaz, M. Ipek, G.F. Celebi, and C. Bindal: Vacuum, 2005, vol. 77, pp. 315–21.10.1016/j.vacuum.2004.11.004 ↗
49. J.S. Zhang, Z.Q. Sun, G.L. Chen, X.J. Liu, H. Cui, and X.J. Duan: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1261–69.10.1007/s11661-997-0292-2 ↗
50. L. Zhang, B.G. Thomas, X. Wang, and K. Cai: 85th Steelmaking Conf. Proc., ISS-AIME, Warrendale, PA, 2002, pp. 431–52.