journal article·2013-08

The Synthesis of the Fe3O4 Nanoparticles and the Analysis of the Current–Voltage Measurements on Au/Fe3O4/p-Si Schottky Contacts in a Wide Temperature Range

Ali Riza Deniz, Zakir Çaldıran, Yilmaz Şahin, Mehmet Şinoforoğlu, Önder Metin, Kadem Meral, Şakir Aydoğan

Publisher page

Abstract

The iron oxide (Fe3O4) magnetic nanoparticles were synthesized via the organic solution phase method and used for the fabrication of the Au/Fe3O4/p-Si rectifying device. The variation in electrical characteristics of the Au/Fe3O4/p-Si Schottky contacts was investigated as a function of temperature using current–voltage (I–V) measurements in the temperature range of 40 K to 370 K (−233 °C to 97 °C). The I–V characteristics of the contacts indicated extremely strong temperature dependence. The double distribution of barrier heights was found in the Fe3O4/p-Si Schottky diodes from the I–V-T measurements. The Schottky barrier height (Φb) increases with the increasing temperature, while the ideality factor n decreases. The nonlinearity in the activation energy plot was observed, which is attributed to barrier inhomogeneities by assuming a Gaussian distribution of barrier heights at the Fe3O4/p-Si interface. The Richardson constant measured from the temperature-dependent I–V characteristics is 2.99 A/K2 cm2, which is lower than the ideal value.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. A. Guerrero-Martínez, J. Pérez-Juste, and L.M. Liz-Marzán: Adv. Mater., 2010, vol. 22, pp. 1182–95.10.1002/adma.200901263 ↗
2. N.H. Cho, T.C. Cheong, J.H. Min, J.H. Wu, S.J. Lee, D. Kim, J.S. Yang, S. Kim, Y.K. Kim, and S.Y. Seong: Nat. Nanotechnol., 2011, vol. 6, pp. 675–82.10.1038/nnano.2011.149 ↗
3. Z. Fan, M. Shelton, A.K. Singh, D. Senapati, S.A. Khan, and P.C. Ray: ACS Nano, 2012, vol. 6, pp. 1065–73.10.1021/nn2045246 ↗
4. W. Yan, H. Fan, and C. Yang: Mater. Lett., 2011, vol. 65, pp. 1595–97.10.1016/j.matlet.2011.03.026 ↗
5. X. Jia and H. Fan: Mater. Res. Bull., 2010, vol. 45, pp. 1496–1500.10.1016/j.materresbull.2010.06.018 ↗
6. L. Lou, K. Yu, Z. Zhang, R. Huang, Y. Wang, and Z. Zhu: Appl. Surf. Sci., 2012, vol. 258, pp. 8521–26.10.1016/j.apsusc.2012.05.031 ↗
7. U. Schwertmann and R.M. Cornell: Iron Oxides in the Laboratory: Preparation and Characterization, VCH, Weinheim, Cambridge, 1991.
8. E. Oh, B.W. Lee, T.S. Kim, J.M. Lee, S.J. Oh, and J.D. Song: Curr. Appl. Phys., 2012, vol. 12, pp. 1244–47.10.1016/j.cap.2012.02.041 ↗
9. V. Janardhanam, A. Ashok Kumar, V.R. Reddy, and P.N. Reddy: J. Alloys Compds., 2009, vol. 485, p. 467.10.1016/j.jallcom.2009.05.141 ↗
10. I. Dokme and S. Altindal: Semicond. Sci. Technol., 2006, vol. 21, p. 1053.10.1088/0268-1242/21/8/012 ↗
11. S. Karatas, S. Altindal, and M. Cakar: Physica B, 2005, vol. 357, p. 386.10.1016/j.physb.2004.12.003 ↗
12. S. Yılmaz, I. Polat, S. Altındal, and E.E. Bacaksız: Mater. Sci. Eng. B, 2012, vol. 177, pp. 588–93.10.1016/j.mseb.2012.03.010 ↗
13. R.T. Tung: Phys. Rev. B, 1992, vol. 45, p. 13509.10.1103/PhysRevB.45.13509 ↗
14. J.H. Werner and H.H. Guttler: J. Appl. Phys., 1991, vol. 69, pp. 1522–33.10.1063/1.347243 ↗
15. H. Yan, M. Zhang, and H. Yan: J. Magnet. Magn. Mater., 2009, vol. 321, pp. 2340–44.10.1016/j.jmmm.2009.02.031 ↗
16. X. Zhichuan, S. Chengmin, H. Yanglong, G. Hongjun, and S. Shouheng: Chem. Mater., 2009, vol. 21, pp. 1778–80.10.1021/cm802978z ↗
17. Z. Çaldıran, A.R. Deniz, Y. Sahin, Ö. Metin, K. Meral, and Ş. Aydoğan: J. Alloys Compds., 2013, vol. 552, pp. 437–42.10.1016/j.jallcom.2012.11.079 ↗
18. R. Rhoderick and R.H. Williams: Metal Semiconductor Contacts, 2nd ed., Clarendon, Oxford, United Kingdom, 1988.
19. J.P. Sullivan, R.T. Tung, M.R. Pinto, and W.R. Graham: J. Appl. Phys., 1991, vol. 70, p. 7403.10.1063/1.349737 ↗
20. S. Chand and J. Kumar: Appl. Phys. A, 1996, vol. 63, p. 171.
21. J.H. Werner and H.H. Güttler: J. Appl. Phys., 1993, vol. 73, p. 1315.10.1063/1.353249 ↗
22. M.B. Reddy, A.A. Kumar, V. Jamardhanam, V.R. Reddy, and P.N. Reddy: Curr. Appl. Phys., 2009, vol. 9, p. 972.10.1016/j.cap.2008.10.001 ↗
23. Y.P. Song, R.L. Van Meirhaeghe, W.H. Laflere, and F. Cardon: Solid State Electron., 1986 vol. 29, p. 19633.10.1016/0038-1101(86)90145-0 ↗
24. C.A. Dimitriadis, S. Logothetidis, and I. Alexandrou: Appl. Phys. Lett., 1995, vol. 66, p. 502.10.1063/1.114070 ↗
25. S. Chand and J. Kumar: Semicond. Sci. Technol., 1995, vol. 10, pp. 1680–88.10.1088/0268-1242/10/12/019 ↗
26. J.H. Werner: Appl. Phys. A, 1988, vol. 47(3), pp. 291–300.10.1007/BF00615935 ↗
27. M.D. Dio, A. Cola, M.G. Lupo, and L. Vasanelli: Solid-State Electron., 1995, vol. 38, pp. 1923–89.10.1016/0038-1101(95)00020-T ↗
28. M.O. Aboelfotoh: Solid-State Electron., 1991, vol. 34, pp. 51–55.10.1016/0038-1101(91)90200-I ↗
29. H. Norde: J. Appl. Phys., 1979, vol. 50, p. 5052.10.1063/1.325607 ↗
30. S. Karatas, S. Altındal, A. Türüt, and A. Özmen: Appl. Surf. Sci., 2003, vol. 217, pp. 250–60.10.1016/S0169-4332(03)00564-6 ↗
31. S. Karatas, S. Altindal, A. Turut, and M. Cakar: Physica B, 2007, vol. 392, p. 43.10.1016/j.physb.2006.10.039 ↗
32. S. Chand: Semicond. Sci. Technol., 2002, vol. 17, p. 3.10.1088/0268-1242/17/7/103 ↗