journal article·2004-12

A semiautomated electron backscatter diffraction technique for extracting reliable twin statistics

B. L. Henrie, T. A. Mason, B. L. Hansen

Publisher page

Abstract

A framework has been developed for extracting reliable twin statistics from a deformed microstructure using crystallographic twin identification techniques with spatially correlated electron backscatter diffraction (EBSD) data. The key features of this analysis are the use of the mathematical definition of twin relationships, the inclination of the common K1 plane at a twin boundary, and the correct identification of the parent orientation in a parent/twin pair. Methods for identifying the parent in a parent/twin pair will be briefly discussed and compared. Twin area fractions are then categorized by operative twin systems, number of active twin variants in each system, and corrected twin widths. These statistics are reported here for α-zirconium samples deformed in quasi-static four-point bend beams and in a 100 m/s Taylor cylinder impact test. Analysis of the statistics also begins to reveal the roles that deformation rate and relative orientation of the boundary conditions to the material’s symmetry axes play in determining the twinning activity that accommodates the imposed boundary conditions. These improved twin statistics can help quantify the deformation processes in materials that deform by twinning as well as serve to provide better validation of proposed models of the deformation processes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Nuclear Materials and Properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. J.W. Christian and S. Mahajan: Progr. Mater. Sci., 1995, vol. 39, p. 1.10.1016/0079-6425(94)00007-7 ↗
2. M.V. Klassen-Neklyudova: Mechanical Twinning of Crystals, Consultants Bureau, New York, NY, 1964.10.1007/978-1-4684-1539-1 ↗
3. C.N. Tomé, P.J. Maudlin, R.A. Lebensohm, and G.C. Kaschner: Acta Mater., 2001, vol. 49, pp. 3085–96.10.1016/S1359-6454(01)00190-2 ↗
4. S.R. Kalidindi: J. Mech. Phys. Solids, 1998, vol. 46, pp. 267–90.10.1016/S0022-5096(97)00051-3 ↗
5. X.Y. Zhang, L.C. Brinson, and Q.P. Sun: Smart Mater. Struct., 2000, vol. 9, pp. 571–81.10.1088/0964-1726/9/5/301 ↗
6. X. Gao, M. Huang, and L.C. Brinson: Int. J. Plasticity, 2000, vol. 16, pp. 1345–69.10.1016/S0749-6419(00)00013-9 ↗
7. P.H. Adler, G.B. Olson, and W.S. Owen: Metall. Trans. A, 1986, vol. 17A, pp. 1725–37.10.1007/BF02817271 ↗
8. M.H. Yoo and C.L. Fu: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 49–63.10.1007/s11661-998-0158-2 ↗
9. D.H. Shin, I. Kim, J. Kim, and Y.T. Zhu: Mater. Sci. Eng., 2002, vol. A334, p. 239.10.1016/S0921-5093(01)01813-5 ↗
10. F.D. Rosi, C.A. Dube, and B.H. Alexander: J. Met., 1953, Feb., pp. 257–65.
11. R.N. Wright and D.E. Mikkola: Metall. Trans. A, 1985, vol. 16A, pp. 881–90.10.1007/BF02814839 ↗
12. S. Mahajan, C.S. Pande, M.A. Iman, and B.B. Rath: Acta Metall., 1997, vol. 45, p. 2633.
13. S.R. Kalidindi: J. Mech. Phys. Solids, 1998, vol. 46, pp. 267–90.10.1016/S0022-5096(97)00051-3 ↗
14. E. El-Danaf, S.R. Kalidindi, and R.D. Doherty: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1223–33.10.1007/s11661-999-0272-9 ↗
15. M.A. Meyers, O. Vöhringer, and V.A. Lubarda: Acta Mater., 2001, vol. 49, pp. 4025–39.10.1016/S1359-6454(01)00300-7 ↗
16. D.R. Chichili, K.T. Ramesh, and K.J. Hemker: Acta Mater., 1998, vol. 46, pp. 1025–43.10.1016/S1359-6454(97)00287-5 ↗
17. A. Rohatagi, K.S. Vecchio, and G.T. Gray III: Acta Mater., 2001, vol. 49, pp. 427–38.10.1016/S1359-6454(00)00335-9 ↗
18. P. Klimanek and A. Potzsch: Mater. Sci. Eng., 2002, vol. A324, p. 145.10.1016/S0921-5093(01)01297-7 ↗
19. A.A. Salem, S.R. Kalidindi, and R.D. Doherty: Scripta Mater., 2002, vol. 46, pp. 419–23.10.1016/S1359-6462(02)00005-2 ↗
20. P. Rangaswamy, M.A.M. Bourke, D.W. Brown, G.C. Kaschner, R.B. Rogge, M.G. Stout, and C.N. Tome: Metall. Mater. Trans. A, 2002, vol. 33A, p. 757.10.1007/s11661-002-0142-1 ↗
21. D.W. Brown, M.A.M. Bourke, P.S. Dunn, R.D. Field, M.G. Stout, and D.J. Thoma: Metall. Mater. Trans. A, 2001, vol. 32A, p. 2219.10.1007/s11661-001-0197-4 ↗
22. B.L. Adams, S.I. Wright, and K. Kunze: Metall. Trans., 1993, vol. 24, p. 819.10.1007/BF02656503 ↗
23. T.A. Mason, J.F. Bingert, G.C. Kaschner, S.I. Wright, and R.J. Larsen: Metall. Mater. Trans. A, 2002, vol. 33A, p. 949.10.1007/s11661-002-0164-8 ↗
24. I.F. Bingert, T.A. Mason, G.C. Kaschner, P.J. Maudlin, and G.T. Gray III: Metall. Mater. Trans. A, 2002, vol. 33A, p. 955.10.1007/s11661-002-0165-7 ↗
25. S.I. Wright and R.J. Larsen: J. Microsc., 2002, vol. 205, p. 245.10.1046/j.1365-2818.2002.00992.x ↗
26. S.I. Wright, J.F. Bingert, T.A. Mason, and R.I. Larsen: Mater. Sci. Forum, 2002, vols. 408–412, p. 511.10.4028/www.scientific.net/MSF.408-412.511 ↗
27. G.C. Kaschner, F.J. Bingert, C. Liu, M.L. Lovato, P.J. Maudlin, M.G. Stout, and C.N. Tome: Acta Mater., 2001, vol. 49, p. 3097.10.1016/S1359-6454(01)00191-4 ↗
28. P.J. Maudlin, G.T. Gray III, C.M. Cady, and G.C. Kaschner: Phil. Trans. R. Soc. London A, 1999, vol. 357, p. 1707.10.1098/rsta.1999.0397 ↗
29. E. Tenckhoff: Deformation Mechanisms, Texture, and Anisotropy in Zirconium and Zircaloy, ASTM STP 966, ASTM, Philadelphia, PA, 1988.