journal article·2014-06

A Novel Multi-objective Genetic Algorithms-Based Calculation of Hill’s Coefficients

Krishnaswamy Hariharan, Nirupam Chakraborti, Frédéric Barlat, Myoung-Gyu Lee

Publisher page

Abstract

The anisotropic coefficients of Hill’s yield criterion are determined through a novel genetic algorithms-based multi-objective optimization approach. The classical method of determining anisotropic coefficients is sensitive to the effective plastic strain. In the present procedure, that limitation is overcome using a genetically evolved meta-model of the entire stress strain curve, obtained from uniaxial tension tests conducted in the rolling direction and transverse directions, and biaxial tension. Then, an effective strain that causes the least error in terms of two theoretically derived objective functions is chosen. The anisotropic constants evolved through genetic algorithms correlate very well with the classical results. This approach is expected to be successful for more complex constitutive equations as well.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Hill, R., Proc. R. Soc. Lond. A, 1948. 193(1033): p. 281-97.
2. Zang, S.L., S. Thuillier, A. Le Port, and P.Y. Manach. Int. J. Mech. Sci, 2011. 53(5): p. 338-47.10.1016/j.ijmecsci.2011.02.003 ↗
3. Banabic, D., H. Aretz, D.S. Comsa, and L. Paraianu, Int. J. Plast., 2005. 21(3): p. 493-512.10.1016/j.ijplas.2004.04.003 ↗
4. Jackiewicz, J. Mater. Manuf. Process., 2009. 24(3): p. 375-83.10.1080/10426910802679881 ↗
5. Chaparro, B.M., S. Thuillier, L.F. Menezes, P.Y. Manach, and J.V. Fernandes. Comput. Mater. Sci, 2008. 44(2): p. 339-46.10.1016/j.commatsci.2008.03.028 ↗
6. Coello, C.A.C., G.B. Lamont, and D.A. Van Veldhuisen, Evolutionary Algorithms for Solving Multi-objective Problems. 2 ed. 2007, Springer, New York.
7. Datta, S. and P.P. Chattopadhyay. Int. Mater. Rev, 2013. 58(8): p. 475-504.10.1179/1743280413Y.0000000021 ↗
8. Chakraborti, N., Int. Mater. Rev, 2004. 49(3–1): p. 246-60.10.1179/095066004225021909 ↗
9. N. Chakraborti: in Informatics for Materials Science and Engineering, Butterworth-Heinemann, Oxford, 2013, pp. 71–95.10.1016/B978-0-12-394399-6.00005-9 ↗
10. Paszkowicz, W., Mater. Manuf. Process., 2013. 28(7): p. 708-25.10.1080/10426914.2012.746707 ↗
11. Banabic, D., Sheet Metal Forming Processes. 2010: Springer, Berlin.10.1007/978-3-540-88113-1 ↗
12. Deb, K., Multi-Objective Optimization Using Evolutionary Algorithms. 2001: Wiley, Chichester
13. Mondal, D.N., K. Sarangi, F. Pettersson, P.K. Sen, H. Saxén, and N. Chakraborti. Hydrometallurgy, 2011. 107(3–4): p. 112-23.10.1016/j.hydromet.2011.02.008 ↗
14. Pettersson, F., N. Chakraborti, and H. Saxén, Appl. Soft Comput., 2007. 7(1): p. 387-97.10.1016/j.asoc.2005.09.001 ↗
15. Miettinen, K., Nonlinear Multiobjective Optimization. 1999: Kluwer Academic Publishers, Boston.
16. Li, X., in Evolutionary Multi-Criterion Optimization, C. Fonseca, et al., Editors. 2003, Springer Berlin Heidelberg. p. 207-21.10.1007/3-540-36970-8_15 ↗
17. Lee, J.Y., L. Xu, F. Barlat, R.H. Wagoner, and M.G. Lee, Exp. Mech, 2013. 53(9): p. 1681-92.10.1007/s11340-013-9758-x ↗
18. Pettersson, F., A. Biswas, P.K. Sen, H. Saxén, and N. Chakraborti, Mater. Manuf. Process, 2009. 24(3): p. 320-30.10.1080/10426910802679386 ↗
19. Ulutan, D., T. Özel, Mater. Manuf. Process., 2013. 28(7): p. 835-41.10.1080/10426914.2012.718474 ↗
20. Barlat, F., J.C. Brem, J.W. Yoon, K. Chung, R.E. Dick, D.J. Lege, F. Pourboghrat, S.H. Choi, and E. Chu, Int. J. Plast., 2003. 19(9): p. 1297-1319.10.1016/S0749-6419(02)00019-0 ↗
21. Barlat, F., J.W. Yoon, and O. Cazacu, Int. J. Plast., 2007. 23(5): p. 876-96.10.1016/j.ijplas.2006.10.001 ↗