journal article·2002-12Open access

Conducting high-cycle fatigue strength step tests on gamma TiAl

B. A. Lerch, S. L. Draper, J. M. Pereira

Abstract

High cycle fatigue strength testing of gamma TiAl by the step test method is investigated. A design of experiments was implemented to determine if the coaxing effect occurred during testing. Since coaxing was not observed, step testing was deemed a suitable method to define the fatigue strength at 106 cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. C.M. Austin, T.J. Kelly, K.E. McAllister, and J.C. Chesnutt: Structural Intermetallics 1997, TMS Symp. Proc., M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 413–25.
2. T.S. Harding and J.W. Jones: Scripta Mater., 2000, vol. 43, pp. 623–29.10.1016/S1359-6462(00)00470-X ↗
3. J. Kumpfert, Y.W. Kim, and D.M. Dimiduk: Mater. Sci. Eng., 1995, vols. A192–A193, pp. 465–73.10.1016/0921-5093(94)03263-7 ↗
4. V. Recina and B. Karlsson: Scripta Mater., 2000, vol. 43, pp. 609–15.10.1016/S1359-6462(00)00448-6 ↗
5. A.F. Madayag: Metal Fatigue: Theory and Design, John Wiley & Sons, New York, NY, 1969, pp. 144–48.
6. T.S. Harding and J.W. Jones: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1741–52.10.1007/s11661-998-0329-1 ↗
7. S.L. Draper, B.A. Lerch, J.M. Pereira, M.V. Nathal, C.M. Austin, and O. Erdman: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1–16.
8. R. Smith, T. Harding, J.W. Jones, P. Steif, and T.M. Pollock: Structural Intermetallics 2001, TMS, Warrendale, PA, 2001, pp. 259–68.
9. T.S. Harding and J.W. Jones: Scripta Mater., 2000, vol. 43, pp. 631–36.10.1016/S1359-6462(00)00471-1 ↗
10. G.M. Sinclair: Proc. ASTM, ASTM, Philadelphia, PA, 19, vol. 52, pp. 743–58.
11. J.B. Kommers: Proc. ASTM, Part II, ASTM, Philadelphia, PA, 1939, vol. 38, pp. 249–68.
12. J.C. Levy and S.L. Kanitkar: J. Iron Steel Inst., 1961, vol. 197, part 4, pp. 296–300.
13. R.I. Stephens, R.G. Dubensky, L.L. Frauen, and R.L. Wrenn: J. Mater. JMLSA, 1972, vol. 7 (1), pp. 64–70.10.1007/BF00549551 ↗
14. T. Nicholas: Fatigue—David L. Davisdson Symp., K.S. Chan, P.K. Liaw, R.S. Bellows, T.C. Zogas, and W.O. Soboyejo, eds., TMS, Warrendale, PA, 2002, pp. 91–106.
15. T. Nakagawa and Y. Ikai: Fatigue Eng. Mater. Struct., 1979, vol. 2, pp. 13–21.10.1111/j.1460-2695.1979.tb01339.x ↗
16. V.I. Belyaev: Problems of Metal Fatigue, Daniel Davey and Co., Inc., New York, NY, 1963, pp. 17–38.
17. M.A. Morris, T. Lipe, and D.G. Morris: Scripta Mater., 1996, vol. 34 (8), pp. 1337–43.10.1016/1359-6462(95)00670-2 ↗
18. U. Christoph, F. Appel, and R. Wagner: Mater. Sci. Eng., 1997, vols. A239–A240, pp. 39–45.10.1016/S0921-5093(97)00558-3 ↗