journal article·2015-09

Effects of Finish Cooling Temperature on Tensile Properties After Thermal Aging of Strain-Based API X60 Linepipe Steels

Hyo Kyung Sung, Dong Ho Lee, Sang Yong Shin, Sunghak Lee, Yunjo Ro, Chang Sun Lee, Byoungchul Hwang

Publisher page

Abstract

Two types of strain-based American Petroleum Institute (API) X60 linepipe steels were fabricated at two finish cooling temperatures, 673 K and 723 K (400 °C and 450 °C), and the effects of the finish cooling temperatures on the tensile properties after thermal aging were investigated. The strain-based API X60 linepipe steels consisted mainly of polygonal ferrite (PF) or quasi-polygonal ferrite and the volume fraction of acicular ferrite increased with the increasing finish cooling temperature. In contrast, the volume fractions of bainitic ferrite (BF) and secondary phases decreased. The tensile properties before and after thermal aging at 473 K and 523 K (200 °C and 250 °C) were measured. The yield strength, ultimate tensile strength, and yield ratio increased with the increasing thermal aging temperature. The strain hardening rate in the steel fabricated at the higher finish cooling temperature decreased rapidly after thermal aging, probably due to the Cottrell atmosphere, whereas the strain hardening rate in the steel fabricated at the lower finish cooling temperature changed slightly after thermal aging. The uniform elongation and total elongation decreased with increasing thermal aging temperature, probably due to the interactions between carbon atoms and dislocations. The uniform elongation decreased rapidly with the decreasing volume fractions of BF and martensite and secondary phases. The yield ratio increased with the increasing thermal aging temperature, whereas the strain hardening exponent decreased. The strain hardening exponent of PL steel decreased rapidly after thermal aging because of the large number of mobile dislocations between PF and BF or martensite or secondary phases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. T. Araki: Atlas for Bainitic Microstructures, ISIJ, Tokyo, 1992, pp. 1–100.
2. J.Y. Koo, M.J. Luton, N.V. Bangaru, R.A. Petkovic, D.P. Fairchild, C.W. Petersen, H. Asahi, T. Hara, Y. Terada, M. Sugiyama, H. Tamehiro, Y. Komizo, S. Okaguchi, M. Hamada, A. Yamamoto, and I. Takeuchi: Proc. 13th Int. Offshore Polar Eng. Conf., Honolulu, Hawaii, 2003, pp. 10–18.
3. K. Nagai, Y. Shinohara, S. Sakamoto, E. Tsuru, and H. Asahi: Proc. 19th Int. Offshore Polar Eng. Conf., Osaka, Japan, 2009, pp. 56–60.
4. M.W. Hukle, B.D. Newbury, D.B. Lillig, J.J. Regina, and A.M. Horn: Proc. 27th Int. Conf. on Offshore Mech. and Arctic Eng., Estoril, Portugal, 2008, pp. 16–19.
5. G. Shigesato, Y. Shinohara, T. Hara, M. Sugiyama, and H. Asahi: Proc. 16th Int. Offshore Polar Eng. Conf., Lisbon, Portugal, 2007, pp. 2983–87.
6. Y. Shinohara, T. Hara, E. Tsuru, and H. Asahi: Proc. 16th Int. Offshore Polar Eng. Conf., Lisbon, Portugal, 2007, pp. 2949–54.
7. R. Denys: Pipeline Technology Conference, Elsevier, Amsterdam, 2000, vols. I, II, pp. 1–166.
8. US Patent Pub., 2007, No. 20070193666.
9. T. Hara, Y. Shinohara, Y. Terada, H. Asahi, and N. Doi: Proc. 19th Int. Offshore Polar Eng. Conf., Osaka, Japan, 2009, pp. 73–79.
10. D.B. Lillig: Proc. 18th Int. Offshore Polar Eng. Conf., Vancouver, Canada, 2008, pp. 1–12.
11. J. Hu, L.-X. Du, J.-J. Wang, C.-R. Gao, T.-Z. Yang, A.-Y. Wang, and R.D.K. Misra: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4937–47.10.1007/s11661-013-1839-z ↗
12. V. Colla, M. Desanctis, A. Dimatteo, G. Lovicu, and R. Valentini: Metall. Mater. Trans. A, 2011, vol. 41A, pp. 2781–93.10.1007/s11661-011-0702-3 ↗
13. S.K. Kim, Y.M. Kim, Y.J. Lim, and N.J. Kim: Proc. 15th Conf. on Mech. Behavior of Mater., Seoul, Korea, 2001, pp. 177–86.
14. G. Krauss and S.W. Thompson: ISIJ Int., 1995, vol. 35, pp. 937-45.10.2355/isijinternational.35.937 ↗
15. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Trans. A, 1990, vol. 21A, pp. 1493-1507.10.1007/BF02672564 ↗
16. H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 2004, vol. A378, pp. 34-39.10.1016/j.msea.2003.10.328 ↗
17. T. Hara, Y. Shinohara, Y. Hattori, T. Muraki, and N. Doi: Proc. 21th Int. Offshore Polar Eng. Conf., ISOPE, Hawaii, 2011, pp. 575–80.
18. Y.M. Kim, S.Y. Shin, H. Lee, B. Hwang S. Lee, and N.J. Kim: Metall. Mater. Trans. A, 2007, vol. 38A. pp. 1731-42.10.1007/s11661-007-9197-3 ↗
19. N. Ishikawa, H. Sueyoshi, and N. Shikanai: Proc. 19th Int. Offshore Polar Eng. Conf., Osaka, Japan, 2009, pp. 43–49.
20. H. Igari, H. Nakanura, and S. Okaguchi: Proc. 21th Int. Offshore Polar Eng. Conf., Hawaii, 2011, pp. 569–74.
21. API Recommended Practice 5L3: American Petroleum Institute, Washington, DC, 1996.
22. W. Oldfield: Curve Fitting Impact Test Data–A Statistical Procedure, ASTM Standardizations News, West Conshohocken, PA, 1975, pp. 24–29.
23. D. Hull and D.J. Bacon: Introduction to Dislocations, 5th Ed., Elsevier Ltd., Amsterdam, 2011.
24. C. Capdevila, F.G. Caballero, and C. Garcia de Andres: ISIJ Int., 2003, vol. 42, pp. 894-902.10.2355/isijinternational.42.894 ↗
25. K.W. Andrew: JISI, 1965, vol. 203, pp. 721-27.
26. C.Y. Kung and J.J. Raymond: Metall. Trans. A, 1982, vol. 13A, pp. 328-31.10.1007/BF02643327 ↗
27. D.P. Koistinen and R.E. Marburger: Acta Metal., 1959, vol. 7, pp. 59–60.10.1016/0001-6160(59)90170-1 ↗
28. Y.M. Kim, S.K. Kim, and N.J. Kim: Mater. Sci. Forum, 2005, vol. 475, pp. 282–92.