journal article·2015-11

High-Temperature Flow Stress and Recrystallization Characteristics of Al-Bearing Microalloyed TWIP Steels

Mahesh Chandra Somani, David A. Porter, Atef S. Hamada, L. Pentti Karjalainen

Publisher page

Abstract

In this study, the effects of microalloying (Nb,V) and aluminum on the constitutive flow behavior and static recrystallization (SRX) characteristics of microalloyed TWIP steels (Fe-20Mn-0.6C-Al-(Nb,V)) have been investigated under hot deformation conditions. Compression tests in a Gleeble simulator, including the double-hit technique, enabled the acquisition of flow stress and recrystallization data. These were analyzed to determine the powers of strain and strain rate as well as the activation energies of deformation and recrystallization (Q def and Q rex). Aluminum increased the flow stress and activation energy of deformation and delayed the onset of dynamic recrystallization of microalloyed TWIP steels. While microalloying with V up to 0.3 pct seems to have little or no effect on the SRX kinetics, microalloying with 0.026 pct Nb significantly slowed down the SRX rate, similarly as in the case of low C-Mn steels. Addition of high aluminum (4.9 pct) marginally retarded the SRX kinetics in comparison with the steels with low aluminum (1.5 pct), with or without microalloying with V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. O. Grassel, L. Kruger, G. Frommeyer, and L.W. Meyer: Intern. J. Plasticity,2000, vol. 16, pp. 1391-1409.10.1016/S0749-6419(00)00015-2 ↗
2. G. Frommeyer, U. Brüx, and P. Neumann: ISIJ Int., 2003, vol. 43, pp. 438-446.10.2355/isijinternational.43.438 ↗
3. O. Bouaziz, S. Allain, C.P. Scott, P. Cugy, and D. Barbier: Curr. Opin. Solid State Mater. Sci., 2011, vol. 15, pp. 141-168.10.1016/j.cossms.2011.04.002 ↗
4. J.P. Chateau, A. Dumay, S. Allain, and A. Jacques: Proceedings of the 15th International Conference on Strength of Materials (ICSMA-15), J. Physics: Conf. Series, 2010, vol. 240, p. 012023. DOI:10.1088/1742-6596/240/1/012023.10.1088/1742-6596/240/1/012023 ↗
5. C. Scott, B. Remy, J.-L. Collet, A. Cael, C. Bao, F. Danoix, B. Malard, and C. Curfs: Int. J. Mater. Research, 2011, vol. 102, pp. 538-549.10.3139/146.110508 ↗
6. Project PrecHiMn, Precipitation in High Manganese Steels, Annual Report, Research Fund for Coal and Steel (RFCS), European Commission, Brussels, 2014.
7. A.S. Hamada, L.P. Karjalainen, and M.C. Somani: Mater. Sci. Eng. A,2007, vol. 467, pp. 114-124.10.1016/j.msea.2007.02.074 ↗
8. A.S. Hamada, L.P. Karjalainen, and M.C. Somani: Cand. Metall. Quart.,2007, vol. 46, pp. 47-56.10.1179/cmq.2007.46.1.47 ↗
9. A.S.Hamada, L.P. Karjalainen, and M.C. Somani: ISIJ Int., 2007, vol. 47, pp. 907–12.10.2355/isijinternational.47.907 ↗
10. D. Li, Y. Feng, Z. Yin, F. Shangguan, K. Wang, Q. Liu, and F. Hu: Mater. Sci. Eng. A,2011, vol. 528, pp. 8084-89.10.1016/j.msea.2011.07.073 ↗
11. A. Marandi, A. Zarei-Hanzaki, N. Haghdadi, and M. Eskandari: Mater. Sci. Eng. A, 2012, vol. 554, pp. 72-78.10.1016/j.msea.2012.06.014 ↗
12. J. Zhang, H. Di, X. Wang, Y. Cao, J. Zhang, and T. Ma: Mater. and Design,2013, vol. 44, pp.354-364.10.1016/j.matdes.2012.08.004 ↗
13. F. Reyes, J. Calvo, J.M. Cabrera, and I. Mejía: Steel Res. Int., 2012, vol. 83, pp. 334-339.10.1002/srin.201100320 ↗
14. L.A. Dobrzański, and W. Borek: J. Achievements in Mater. Manufacturing Processes, 2011, vol. 46, pp. 71-78.
15. L.A. Dobrzański, and W. Borek: Mater. Sci. Forum, 2012, vols. 706-709, pp. 2053-58.10.4028/www.scientific.net/MSF.706-709.2053 ↗
16. M. Schinhammer, C.M. Pecnik, F. Rechberger, A.C. Hänzi, J.F. Löffler, and P.J. Uggowitzer: Acta Mater.,2012, vol. 60, pp. 2746-56.10.1016/j.actamat.2012.01.041 ↗
17. C.M. Sellars, and W.J.McG. Tegart: Int. Metal. Rev., 1972, vol. 17, pp. 1-16.10.1179/095066072790137765 ↗
18. M.C. Somani, L.P. Karjalainen, D.A. Porter, and R.A. Morgridge: in Proceedings of the International Conference on Thermomechanical Processing: Mechanisms, Microstructure and Control, E.J. Palmiere, M. Mahfouf, and C. Pinna, eds., The University of Sheffield, Sheffield, 2003, pp. 436–41.
19. M.C. Somani, and L.P. Karjalainen: Mater. Sci. Forum,2012, vols. 715-716, pp. 751-756.10.4028/www.scientific.net/MSF.715-716.751 ↗
20. B. Roebuck, J.D. Lord, R.K. Varma and M.S. Loveday: Guidelines for the Measurement of Flow Stress in Hot Axisymmetric Compression Tests, NPL Report CMMT(BPG)003, National Physical Laboratory, Middlesex, UK, February 1997.
21. J.S. Perttula, and L.P. Karjalainen: Mater. Sci. Technol., 1998, vol. 14, pp. 626-630.10.1179/mst.1998.14.7.626 ↗
22. J. Perttula: Ph.D. Thesis, Acta Universitatis Ouluensis, C 119, University of Oulu, Finland, 1998.
23. C. Scott, and P. Cugy: Proceedings of the International Symposium on Automobile Steel (ISAS’09), Dalian, China, 2009, pp. 211–21.
24. Thermo-Calc Software AB: TCFE6—TCS Steel/Fe-Alloys Database, Version 6.2, 2010.
25. K.-T. Park, S.W. Hwang, J.H. Ji, and C.S. Lee: Procedia Engg.,2011, vol. 10, pp.1002-1006.10.1016/j.proeng.2011.04.165 ↗
26. H.J. McQueen, S. Yue, N.D. Ryan, and E. Fry: J. Mater. Process. Technol., 1995, vol. 53, pp. 293-310.10.1016/0924-0136(95)01987-P ↗
27. F. Reyes-Calderón, I. Mejia, A. Boulaajaj, and J.M. Cabrera: Mater. Sci. Eng. A, 2013, vol. 560, pp. 552–60.10.1016/j.msea.2012.09.101 ↗
28. M.C. Somani, H. Tervonen, L.P. Karjalainen, and D.A. Porter: Mater. Sci. Forum, 2013, vol. 753, pp. 195-200.10.4028/www.scientific.net/MSF.753.195 ↗
29. F. Reyes-Calderón, I. Mejía, and J.M. Cabrera: Mater. Sci. Eng. A, 2013, vol. 562, pp. 46-52.10.1016/j.msea.2012.10.091 ↗
30. M. El Wahabi, J.M. Cabrera, and J.M. Prado: Mater. Sci. Eng. A,2003, vol. 343, pp. 116-125.10.1016/S0921-5093(02)00357-X ↗
31. A.S. Hamada: Ph.D. Thesis, Acta Universitatis Ouluensis, C 281, University of Oulu, Finland, 2007.
32. D. Li, Y. Feng, Z. Yin, F. Shangguan, K. Wang, Q. Liu, and F. Hu: Mater. Des.,2012, vol. 34, pp.713-718.10.1016/j.matdes.2011.05.031 ↗
33. W. Xiong, B. Wietbrock, A. Saeed-Akbari, M. Bambach, and G. Hirt: Steel Res. Int., 2011, vol. 82, pp.127-136.10.1002/srin.201000263 ↗
34. L.P. Karjalainen, J.A. Koskiniemi, and X.D. Liu: Proceedings of the 37th Mechanical Working and Steel Processing Conference & International Symposium on Recovery and Recrystallization in Steel, Hamilton, ON, 1995, vol. XXXIII, pp. 861–69.
35. D.J. Towle, and T. Gladman: Metal Sci.,1979, vol. 13, pp. 246-256.
36. G. Mohapatra, and S.S. Sahay: Mater. Sci. Technol.,2011, vol. 27, pp. 377-381.10.1179/026708310X12677993661961 ↗
37. C.M. Sellars, and J.A. Whiteman: Metal Sci.,1979, vol. 13, pp. 187-194.10.1179/msc.1979.13.3-4.187 ↗
38. L.M. Fu, H.R. Wang, W. Wang, and A.D. Shan: Mater. Sci. Technol., 2011, vol. 27, pp. 996-1001.10.1179/1743284711Y.0000000001 ↗
39. Y.X. Wu, D. Tang, Z.L. Mi, and H.T. Jiang: Adv. Mater. Res.,2014, vol. 893, pp. 419-423.10.4028/www.scientific.net/AMR.893.419 ↗
40. L.P. Karjalainen, and J.S. Perttula, ISIJ Int.,1996, vol. 36, pp. 729-736.10.2355/isijinternational.36.729 ↗
41. P.D. Hodgson, and R.K. Gibbs: ISIJ Int.,1992, vol. 32, pp. 1329-1338.10.2355/isijinternational.32.1329 ↗
42. C.M. Sellars: Mater. Sci. Technol.,1990, vol. 6, pp. 1072-1081.10.1179/mst.1990.6.11.1072 ↗
43. L.P. Karjalainen: Proceedings of the 3rd International Conference on HSLA Steels, The Chinese Society for Metals, Beijing, 1995, pp. 179–84.
44. K. Airaksinen, L.P. Karjalainen, D. Porter, and J. Perttula: Mater. Sci. Forum,1998, vols. 284-286, pp.119-126.10.4028/www.scientific.net/MSF.284-286.119 ↗
45. A.S. Hamada, L.P. Karjalainen, M.C. Somani, and R.M. Ramadan: Mater. Sci. Forum, 2007, vol. 550, pp.217-222.10.4028/www.scientific.net/MSF.550.217 ↗