journal article·2020-09

Eutectic Nucleation in 7xxx Series Aluminum Alloys from a Non-classical Viewpoint

Mohammad Pourgharibshahi, Mehdi Divandari, Hassan Saghafian, Giulio Timelli

Publisher page

Abstract

The early stages of eutectic solidification in a copper-containing 7xxx series aluminum alloy (AA 7068 or AMS 4331) were studied using the two-thermocouple computer-aided thermal analysis (CATA) technique. A feature was detected on the cooling rate curve at the equilibrium solidus temperature of the alloy which persists until the peak of the subsequent final eutectic solidification. Detailed analysis of the temperature difference between the wall and the center of the thermal analysis sample, together with examination of the eutectic solidified on the walls of porosities and a study of the eutectic nucleation on the basis of the non-classical theory of adsorption heterogeneous nucleation, indicated how the feature can be related to the faceting of the atomic structure of the solid/liquid (S/L) interface. The solidification of the remnant liquid after the faceting transition at the equilibrium solidus point depends on the interfacial undercooling and proceeds via either primary phase re-nucleation or secondary phase nucleation by adsorption. The eutectic solidification is affected by the presence of the primary phase which acts like an adsorbent.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. L.F. Mondolfo: Aluminum Alloys: Structure and Properties, 2nd edn., Butterworths, London, 1976.
2. N.A. Belov, D.G. Eskin, A.A. Aksenov (2005) Multicomponent Phase Diagrams. Elsevier, New York
3. ASM International (2018) Aluminum Science and Technology. ASM International, Cleveland, pp. 462–77
4. R. Ghiaasiaan, X. Zeng, and S. Shankar: Mater. Sci. Eng. A, 2014, vol. 594, pp. 260–77.10.1016/j.msea.2013.11.087 ↗
5. R. Ghiaasiaan, B.S. Amirkhiz, and S. Shankar: Mater. Sci. Eng. A, 2017, vol. 698, pp. 206–17.10.1016/j.msea.2017.05.047 ↗
6. S. Lin: PhD thesis, UNIVERSITÉ DU QUÉBEC À CfflCOUTIM MÉMOIRE, 1999.
7. D.G. Eskin and L. Katgerman: Metall. Mater. Trans. A, 2007, vol. 38, pp. 1511–9.10.1007/s11661-007-9169-7 ↗
8. M. Rappaz, A. Jacot, W.J. Boettinger (2003) Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 34A:467–7910.1007/s11661-003-0083-3 ↗
9. M. Rappaz: Curr. Opin. Solid State Mater. Sci., 2015, vol. 20, pp. 37–45.10.1016/j.cossms.2015.07.002 ↗
10. D. Warrington and D.G. Mccartney: Cast Met., 1990, vol. 3, pp. 202–8.10.1080/09534962.1990.11819040 ↗
11. T. Koutsoukis and M.M. Makhlouf: Int. J. Cast Met. Res., 2017, vol. 30, pp. 231–43.10.1080/13640461.2017.1287645 ↗
12. M. Pourgharibshahi, M. Divandari, H. SaghafianLarijani, P. Ashtari (2017) J. Mater. Process. Technol. 250:203–1910.1016/j.jmatprotec.2017.07.018 ↗
13. C.-C. Wang and C.S. Smith: JOM, 1950, vol. 2, pp. 136–8.10.1007/BF03398987 ↗
14. L. Bäckerud, E. Krol, J. Tamminen (1986) Solidification Characteristics of Aluminum Alloys, Wrought Alloys, Vol. 1. Skanaluminium, Oslo
15. L. Bäckerud, G. Chai, and J. Tamminen: Solidification Characteristics of Aluminum Alloys. Vol. 2. Foundry Alloys, AFS/ SKAN ALUMINUM, New York, 1990.
16. M.A. Lamplough and B.A. Scott: Proc. R. Soc. Lond. A, 1914, vol. 90, pp. 600–4.10.1098/rspa.1914.0092 ↗
17. J.H. Hollomon and D. Turnbull: J. Met., 1951, pp. 803–05.10.1007/BF03397378 ↗
18. B.E. Sundquist and L.F. Mondolfo: Trans. Met. Soc. AIME, 1961, vol. 221, p. 607.
19. B.E. Sundquist, R. Bruscato, and L.F. Mondolfo: J. Inst. Met., 1963, vol. 91, p. 204.
20. M. Gigliotti, G.A. Colligan, and G.L.F. Powell: Metall. Trans., 1970, vol. 1, pp. 891–7.10.1007/BF02811770 ↗
21. G.L.F. Powell and G.A. Colligan: Metall. Trans., 1971, vol. 2, pp. 849–52.10.1007/BF02662745 ↗
22. G.L.F. Powell and G.A. Colligan: Metall. Trans., 1970, vol. 1, pp. 1349–51.10.1007/BF02900253 ↗
23. G.L.F. Powell and G.A. Colligan: Metall. Trans., 1970, vol. 1, pp. 133–38.10.1007/BF02819252 ↗
24. C. Lemaignan, M.C. Cheynet, and N. Eustathopoulos: J. Cryst. Growth, 1980, vol. 50, pp. 720–8.10.1016/0022-0248(80)90018-4 ↗
25. L.M. Hogan: J. Aust. Inst. Met., 1965, vol. 10, pp. 78–88.
26. M. Hillert and H. Steinhauser: Jemont Ann, 1960, vol. 144, pp. 520–59.
27. C. Lemaignan: Acta Metall., 1981, vol. 29, pp. 1379–84.10.1016/0001-6160(81)90173-5 ↗
28. S. Akamatsu, S. Moulinet, and G. Faivre: Metall. Mater. Trans. A, 2001, vol. 32, pp. 2039–48.10.1007/s11661-001-0016-y ↗
29. L.F. Mondolfo, B. Vonnegut, H. Chessin (1972) Science, 176:69510.1126/science.176.4035.695-b ↗
30. A. Kofler: J. Austral. Inst. Met., 1965, vol. 10, p. 132.
31. M. Heni and H. Löwen: Phys. Rev. Lett., 2000, vol. 85, pp. 3668–71.10.1103/PhysRevLett.85.3668 ↗
32. H. Men, Z. Fan (2018) Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 49:2766–77.10.1007/s11661-018-4628-x ↗
33. O. Dolynchuk, M. Tariq, and T. Thurn-Albrecht: J. Phys. Chem. Lett., 2019, vol. 10, pp. 1942–6.10.1021/acs.jpclett.9b00608 ↗
34. W.T. Kim and B. Cantor: Acta Metall., 1994, vol. 42, pp. 3115–27.10.1016/0956-7151(94)90409-X ↗
35. B. Cantor (2003) Philos. Trans. R. Soc. A Math. Phys. Eng. Sci. 361:409–1710.1098/rsta.2002.1137 ↗
36. S. Ma, A.J. Brown, R. Yan, R.L. Davidchack, P.B. Howes, C. Nicklin, Q. Zhai, T. Jing, and H. Dong: Commun. Chem., 2019, vol. 2, pp. 1–12.10.1038/s42004-018-0104-1 ↗
37. G.A. Chadwick: Acta Metall., 1962, vol. 10, pp. 1–12.10.1016/0001-6160(62)90180-3 ↗
38. M.F. Chell and H.W. Kerr: Metall. Trans., 1972, vol. 3, pp. 2002–4.10.1007/BF02642592 ↗
39. W. Kurz and D.J. Fisher: Fundamentals of Solidification, 3rd edn., CRC Press, Aedermannsdorf, 1998.
40. S.T. Bluni, M.R. Notis, and A.R. Marder: Acta Metall. Mater., 1995, vol. 43, pp. 1775–82.10.1016/0956-7151(94)00397-Z ↗
41. M. Pourgharibshahi, H. Saghafian, M. Divandari, and G. Timelli: Metall. Mater. Trans. A, 2019, vol. 50, pp. 326–35.10.1007/s11661-018-5000-x ↗
42. B. Cini, E. Vinet, and P.J. Desre: Philos. Mag. A, 2000, vol. 80, pp. 955–66.10.1080/01418610008212092 ↗
43. P.J. Desré, E. Cini, and B. Vinet: J. Non. Cryst. Solids, 2001, vol. 288, pp. 210–7.10.1016/S0022-3093(01)00522-1 ↗
44. G. Chai (1994) Dendrite Coherency during Equiaxed Solidification in Aluminium Alloys. Stockholm University, Stockholm.
45. S. Farahany, A. Ourdjini, T.A.A. Bakar, and M.H. Idris: Met. Mater. Int., 2014, vol. 20, pp. 929–38.10.1007/s12540-014-5019-5 ↗
46. C. González-Rivera, H. CruzM, A. GarcíaH., J.A. Juarez-Islas (1999) J. Mater. Eng. Perform. 8:103–1010.1361/105994999770347241 ↗
47. Y. Xu, D. Casari, Q. Du, R.H. Mathiesen, L. Arnberg, and Y. Li: Acta Mater., 2017, vol. 140, pp. 224–39.10.1016/j.actamat.2017.08.053 ↗
48. D.H. StJohn, A. Prasad, M.A. Easton, and M. Qian: Metall. Mater. Trans. A, 2015, vol. 46, pp. 4868–85.10.1007/s11661-015-2960-y ↗
49. J.F. Wallace: Jom, 1963, vol. 15, pp. 372–6.10.1007/BF03378248 ↗
50. L.A. Tarshis, J.L. Walker, and J.W. Rutter: Metall. Trans., 1971, vol. 2, pp. 2589–97.10.1007/BF02814899 ↗
51. I. Maxwell and A. Hellawell: Acta Metall., 1975, vol. 23, pp. 229–37.10.1016/0001-6160(75)90188-1 ↗
52. D. Shu, B. Sun, J. Mi, and P.S. Grant: Acta Mater., 2011, vol. 59, pp. 2135–44.10.1016/j.actamat.2010.12.014 ↗
53. D.H. StJohn, M. Qian, M.A. Easton, and P. Cao: Acta Mater., 2011, vol. 59, pp. 4907–21.10.1016/j.actamat.2011.04.035 ↗
54. Z. Fan, F. Gao, L. Zhou, and S.Z. Lu: Acta Mater., 2018, vol. 152, pp. 248–57.10.1016/j.actamat.2018.04.045 ↗
55. I. Sunagawa: Crystals: Growth, Morphology, and Perfection, Cambridge University Press, Cambridge, 2005.10.1017/CBO9780511610349 ↗
56. W.K. Burton and N. Cabrera: Discuss. Faraday Soc., 1949, vol. 5, p. 33.10.1039/df9490500033 ↗
57. F.C. Frank: Adv. Phys., 1952, vol. 1, pp. 91–109.10.1080/00018735200101171 ↗
58. W.K. Burton, N. Cabrera, and F.C. Frank: Nature, 1949, vol. 163, pp. 398–9.10.1038/163398a0 ↗
59. F.C. Frank (1949) Discuss. Faraday Soc. 5:48–5410.1039/df9490500048 ↗
60. J.A. Dantzig, M. Rappaz (2009) Solidification, 1st edn, EPFL Press, Lausanne10.1201/9781439808030 ↗