journal article·2020-01

Stress Corrosion Cracking Observed in Ex-service Gas Pipelines: A Comprehensive Study

A. Roccisano, S. Nafisi, R. Ghomashchi

Publisher page

Abstract

The properties affecting stress corrosion cracking (SCC) in ex-service API 5L X42 and X65 pipeline steels were investigated to determine the differences between the two grades. Field-grown sections of SCC affected pipelines were studied to determine what effect the physical properties had on SCC growth. Using electron backscatter diffraction (EBSD) and a newly developed technique, SCC affected grains were separated from unaffected grains to determine the microstructural properties influencing SCC. It was confirmed in both grades that cracks primarily propagated between high angle grain boundaries and most coincident site lattice boundaries didn’t offer increased resistance to SCC. Σ3, Σ7, and Σ11 boundaries were present in higher proportions in uncracked grain boundaries than cracked in both grades. Crack arrest locations typically had high levels of {110}//RP (rolling plane) and {111}//RP textured grains ahead of cracks whilst cracked grain boundaries tended to contain both {110}//RP and {112}//RP textured grains. Uncracked outer surfaces of pipe in both grades contained mostly {110}//RP textured grains. Transgranular cracking was observed in both grades in isolated locations and tended to occur in {100}//RP and {111}〈112〉 textures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Transportation Research Board and National Academies of Sciences, Engineering, Medicine: Safely Transporting Hazardous Liquids and Gases in a Changing U.S. Energy Landscape, The National Academies Press, Washington, DC, 2018. https://doi.org/10.17226/24923.10.17226/24923 ↗
2. R.N. Parkins: CORROSION 2000. 2000.
3. A. King, G. Johnson, D. Engelberg, W. Ludwig, and J. Marrow: Science, 2008, 321(5887): p. 382-385.10.1126/science.1156211 ↗
4. B. Fang, A. Atrens, J. Wang, E.-H. Han, Z. Zhu, and W. Ke: Journal of materials science, 2003, 38(1): p. 127-132.10.1023/A:1021126202539 ↗
5. J.G. Gonzalez-Rodriguez, M. Casales, V.M. Salinas-Bravo, J.L. Albarran, and L. Martinez: Corrosion, 2002, 58(7): p. 584-590.10.5006/1.3277649 ↗
6. National Energy Board: Public Inquiry Concerning Stress Corrosion Cracking on Canadian Oil and Gas Pipelines: Report of the Inquiry, Technical Report no. MH-2-95, National Energy Board, Calgary, AB, 1996. http://publications.gc.ca/pub?id=9.646397&sl=0
7. F. Song: CORROSION 2008. 2008.
8. R.N. Parkins: Corrosion, 1996, 52(5): p. 363-374.10.5006/1.3292124 ↗
9. G. Van Boven, W. Chen, and R. Rogge: Acta Materialia, 2007, 55(1): p. 29-42.10.1016/j.actamat.2006.08.037 ↗
10. O. Lavigne, E. Gamboa, W. Costin, M. Law, V. Luzin, and V. Linton: Engineering Failure Analysis, 2014, 45: p. 283-91.10.1016/j.engfailanal.2014.07.011 ↗
11. E. Gamboa, V. Linton, and M. Law: International Journal of Fatigue, 2008, 30(5): p. 850-860.10.1016/j.ijfatigue.2007.06.006 ↗
12. J.H. Bulloch: Theoretical and Applied Fracture Mechanics, 1991, 16(1): p. 1-17.10.1016/0167-8442(91)90036-J ↗
13. M.A. Eaglesham, J.U. Gaum, and J.H. Bulloch: Theoretical and Applied Fracture Mechanics, 1988, 10(2): p. 97-109.10.1016/0167-8442(88)90002-X ↗
14. R. Parkins: in 5th Symp. Line Pipe Research L. 1974. p. 30174.
15. J.A. Beavers, T.K. Christman, and R.N. Parkins: Materials Performance, 1988, 27(4): p. 22-26.
16. P. Kentish: Corrosion Science, 2007, 49(6): p. 2521-2533.10.1016/j.corsci.2006.12.014 ↗
17. H. Asahi, T. Kushida, M. Kimura, H. Fukai, and S. Okano: Corrosion, 1999, 55(7): p. 644-652.10.5006/1.3284018 ↗
18. J. Li, M. Elboujdaini, B. Fang, R. Revie, and M.W. Phaneuf: Corrosion, 2006, 62(4): p. 316-322.10.5006/1.3280664 ↗
19. Z.Y. Liu, X.G. Li, C.W. Du, G.L. Zhai, and Y.F. Cheng: Corrosion Science, 2008, 50(8): p. 2251-2257.10.1016/j.corsci.2008.05.011 ↗
20. M.A. Arafin and J.A. Szpunar: Corrosion Science, 2009, 51(1): p. 119-128.10.1016/j.corsci.2008.10.006 ↗
21. M.A. Arafin and J.A. Szpunar: ICF12, Ottawa 2009, 2009.
22. A. Roccisano, S. Nafisi, and R. Ghomashchi: in Iron Steel Technol. Conf., AISTech 2018, 2018.
23. V. Venegas, F. Caleyo, J.L. González, T. Baudin, J.M. Hallen, and R. Penelle: Scripta Materialia, 2005, 52(2): p. 147-152.10.1016/j.scriptamat.2004.09.015 ↗
24. V.C. Venegas, F. Hallen, J. M. Baudin, T. Penelle: Metall. Mater. Trans. A, 2007, 38(5): 1022-1031.10.1007/s11661-007-9130-9 ↗
25. V. Venegas, F. Caleyo, T. Baudin, J.H. Espina-Hernández, and J.M. Hallen: Corrosion Science, 2011, 53(12): p. 4204-4212.10.1016/j.corsci.2011.08.031 ↗
26. B. Rath and I. Bernstein: Metallurgical Transactions, 1971, 2(10): p. 2845-2851.10.1007/BF02813262 ↗
27. T. Watanabe: Res Mechanica, 1984, 11(1): p. 47-84.
28. H. Lin and D. Pope: Acta metallurgica et materialia, 1993, 41(2): p. 553-562.10.1016/0956-7151(93)90085-7 ↗
29. P. Lin, G. Palumbo, U. Erb, and K.T. Aust: Scripta Metallurgica Et Materialia, 1995, 33(9): p. 1387-1392.10.1016/0956-716X(95)00420-Z ↗
30. American Petroleum Institute: API 5L: Specification for Line Pipe, 43rd edn., API Publishing Services, Washington, DC, 2004.
31. A. ASTM: ASTM Stand, 2012, pp. 1–43.
32. O. Lavigne, E. Gamboa, J. Griggs, V. Luzin, M. Law, and A. Roccisano: Mater. Sci. Technol. 2016;85:26–35
33. E. Gamboa: Corrosion Engineering, Science and Technology, 2015, 50(3): p. 191-195.10.1179/1743278215Y.0000000006 ↗
34. O. Lavigne, E. Gamboa, V. Luzin, and M. Law: Engineering Failure Analysis, 2018, 85: p. 26-35.10.1016/j.engfailanal.2017.12.004 ↗
35. J. Beavers and N. Thompson: ASM Handbook. ASM International, Cleveland 2006, pp 1015-1025
36. F.J. Humphreys, G.S. Rohrer, and A.D. Rollett: in Recrystallization and related annealing phenomena, chap. 4, Elsevier, Amsterdam, 2017, p. 118.10.1016/B978-0-08-098235-9.00006-9 ↗
37. J.H. Shen, Y.L. Li, and Q. Wei: Materials Science and Engineering: A, 2013, 582: p. 270-275.10.1016/j.msea.2013.06.025 ↗
38. EDAX: Electron Backscatter Diffraction (EBSD) Analysis of Cracking in Polycrystalline Materials, Technical Note, 2015. https://www.edax.com/resources/applications-literature?requestedmedia=/-/media/ametekedax/files/ebsd/technical_notes/ebsd%20analysis%20of%20cracking%20in%20polycrystalline%20materials.pdf&EmailRequired=yes.
39. J. Kuniya, H. Anzai, and I. Masaoka: Corrosion, 1992, 48(5): p. 419-425.10.5006/1.3315955 ↗
40. G.S. Rohrer: Journal of Materials Science, 2011, 46(18): p. 5881-5895.10.1007/s10853-011-5677-3 ↗
41. M.A. Mohtadi-Bonab, J.A. Szpunar, R. Basu, and M. Eskandari: International Journal of Hydrogen Energy, 2015, 40(2): p. 1096-1107.10.1016/j.ijhydene.2014.11.057 ↗
42. R. Ray, J. Jonas, M. Butron-Guillen, and J. Savoie: ISIJ International, 1994, 34(12): p. 927-942.10.2355/isijinternational.34.927 ↗
43. O. Engler, M.Y. Huh, and C.N. Tome: Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 2000, 31(9): p. 2299-2315.10.1007/s11661-000-0146-7 ↗
44. N.S. Mourino, R. Petrov, J.H. Bae, K. Kim, and L.A.I. Kestens: Advanced Engineering Materials, 2010, 12(10): p. 973-980.10.1002/adem.201000065 ↗
45. S. Nafisi, M.A. Arafin, L. Collins, and J. Szpunar: Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 2012, 531: p. 2-11.
46. H. Kurishita, A. Oishi, H. Kubo, and H. Yoshinaga: J. Japan Inst. Metals, 1983, 47: p. 546.10.2320/jinstmet1952.47.7_546 ↗
47. V.Y. Gertsman and S.M. Bruemmer: Acta Materialia, 2001, 49(9): p. 1589-1598.10.1016/S1359-6454(01)00064-7 ↗
48. B. Alexandreanu, B. Capell, and G.S. Was: Materials Science and Engineering: A, 2001, 300(1–2): p. 94-104.10.1016/S0921-5093(00)01705-6 ↗
49. D.C. Crawford and G.S. Was: Metallurgical Transactions a-Physical Metallurgy and Materials Science, 1992, 23(4): p. 1195-1206.10.1007/BF02665051 ↗
50. B. Alexandreanu and G.S. Was: Scripta Materialia, 2006, 54(6): p. 1047-1052.10.1016/j.scriptamat.2005.11.051 ↗
51. A. Boumaiza, T. Baudin, N. Rouag, and R. Penelle: Chinese Physics Letters, 2007, 24(6): p. 1759.10.1088/0256-307X/24/6/090 ↗