journal article·2019-12

Application of Diffusion Path Analysis to Understand the Mechanisms of Transient Liquid-Phase Bonding in the Ni-Si-B System

E. D. Moreau, S. F. Corbin

Publisher page

Abstract

Diffusion path analysis was applied to the Ni-Si-B system to explain the deviation from classical transient liquid-phase bonding observed when using multicomponent systems containing Boron as a melting point depressant. This was achieved using a combination of differential scanning calorimetry, SEM-EDS microstructural and chemical analysis, and Thermo-Calc modeling software of Ni/Ni-Si-B couples. Compositional analysis identified differing distributions of B and Si across the braze joint which were mapped onto isothermal sections of Thermo-calc-generated phase diagrams. Below 1093 °C, the inevitable formation of diffusionally affected zone (DAZ) and isothermally solidified zone is a direct consequence of the need for phase equilibria in the Ni-Si-B ternary system and is predicted by diffusion path analysis. Above 1100 °C, diffusion path analysis also correctly predicts a persistent liquid phase observed to occur through the melting of the DAZ (i.e., a γ-Ni(Si)-Ni3B eutectic reaction).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. W.D. Macdonald, T.W. Eagar, Annu. Rev. Mater. Sci., (1992) Vol. 22 pp. 23-46.10.1146/annurev.ms.22.080192.000323 ↗
2. D.S. Duvall, W.A. Owczarski, D.F. Paulonis, Welding Journal, (1974), Vol. 53-4 pp. 203-214.
3. P. Roberts: 2nd ed., CRC Press, Boca Raton, 2013, pp. 266–314.
4. N.P. Wikstrom, O.A. Idowu, O.A. Ojo, M.C. Chaturvedi: in Proc. 3rd Int. Brazing and Soldering Conf. TX, 2006.
5. C.W. Sinclair, J. Phase Equilibira. (1999), 20(4), pp. 361–69.10.1361/105497199770340888 ↗
6. C.W. Sinclair, G.R. Purdy, J.E. Morral, Metall. Mater. Trans. A., (2000), Vol. 31A pp. 1187-1192.10.1007/s11661-000-0114-2 ↗
7. X.J. Yuan, M.B. Kim, C.Y. Kang, J. Mater. Sci. Tech., (2011), Vol.27(7), pp. 1191-1197.10.1179/026708310X12668415533847 ↗
8. W.A. Owczarski, W.H. King, D.S. Duvall: U.S. Patent# 3,530,568, 1970.
9. I. Tuah-Poku, M. Dollar, T. B. Massalski, Metall. Trans. A., (1988), Vol. 19A, pp. 675-686.10.1007/BF02649282 ↗
10. J. T. Niemann, R.A. Garett, Welding Journal, (1974), Vol. 53(4), Part 1., pp. 175-183.
11. H. Nakagawa, C.H. Lee, T.H. North, Metall. Trans. A, (1991), Vol. 22A, pg. 543-555.10.1007/BF02656822 ↗
12. J.D. Schobel, N.H. Stadelmaier, Z. Metallkd., (1965), Vol. 56, pp. 856.
13. T. Tokunaga, K. Nishio, H. Ohtani, M. Hasebe, Materials Trans., (2003), Vol. 44(9), pp. 1651-54.10.2320/matertrans.44.1651 ↗
14. B. Jansson, J. Agren, A, Mat. Sci. and Eng., (1984), Vol. 63, pp. 51-60.10.1016/0025-5416(84)90162-9 ↗
15. M. Pouranvari, A. Ekrami, J. Weld. Res. (2014), vol. 93, pp. 60–68.
16. M. Pouranvari, A. Ekrami, Canadian Metallurgical Quarterly, (2014), Vol. 53(1), pp. 38-46.10.1179/1879139513Y.0000000076 ↗
17. A. Ghasemi, M. Pouranvari, Sci. and Tech. of Welding and Joining, (2018), 23(5), pp. 441-448.10.1080/13621718.2017.1410341 ↗
18. M. Pouranvari, A. Ekrami, A.H. Kokabi, J. Sci. Tech. Weld. Join. (2018), 23(1), pp. 13-18.10.1080/13621718.2017.1327934 ↗
19. A.T. Egbewande, C. Chukwukaeme, O.A. Ojo, J. Materials Characterization, (2008), Vol. 59, pg. 1051-1058.10.1016/j.matchar.2007.08.023 ↗
20. J.E. Ramirez, S. Liu: Weld. J. Suppl. 1992, pp. 365–76.
21. Y. Zhou, W.F. Gale, T.H. North, Int. Mat. Rev., Vol. 40(5), (1995), pp. 181-196.10.1179/imr.1995.40.5.181 ↗
22. K. Ohsasa, T. Shinmura, T. Narita, J. Phase Equilibria, (1999), 20(3), pp. 199-206.10.1361/105497199770335721 ↗
23. M. Abdelfatah, O.A. Ojo: in Proc. 3rd Int. Brazing and Soldering Conf., TX, 2006.
24. R. Metselaar, J. Mater. Ed. (1984), 6, p. 229–260.
25. R. Metselaar, J. Mater. Ed. (1985), 7(4), p. 653–685.
26. J. B. Clark, Transactions of the Metallurgical Society of AIME, (1963), Vol. 227, pp. 1250–1251.
27. D.M. Turriff, S.F. Corbin, M. Kozdras, Acta. Mater., (2010), Vol. 210(8), pp. 1332-1341.10.1016/j.actamat.2009.10.037 ↗
28. Corbin, P. Lucier, Metall. Mater. Trans. A, (2001), Vol. 32(4), pp. 971-978.10.1007/s11661-001-0354-9 ↗
29. M.L. Kuntz, S.F. Corbin, Y. Zhou, Acta Mater., (2005), Vol. 53(10), pp. 3071-82.10.1016/j.actamat.2005.03.018 ↗
30. D.C. Murray, S.F. Corbin, J. Mater. Proc. Tech., (2017), Vol. 248, pp. 92-102.10.1016/j.jmatprotec.2017.05.013 ↗
31. B.A. Lindner, Thermodynamic and Kinetic Simulation of Transient Liquid-Phase Bonding. M.A.Sc. Thesis Dissertation University of Wisconsin Milwaukee, 2015.
32. J. Ruiz-Vargas, N. Siredey-Schwaller, P. Noyrez, S. Mathieu, P. Bocher, N. Gey, J. Mater. Charac., (2014), Vol. 94, pp. 46-47.10.1016/j.matchar.2014.04.009 ↗
33. W. J. Boettinger, U.R. Kattner, K.W. Moon, J.H. Perepezko, DTA and Heat-Flux DSC Measurements of Alloy Melting and Freezing: Practice Guide. National Institute of Standards and Technology, Special Publication, 2006, pp. 960–15.10.1016/B978-008044629-5/50005-7 ↗
34. J. Ruiz-Vargas, N. Siredey-Schwaller, P. Bocher, A Hazotte, J. Mater. Proc. Tech., (2013a), Vol. 213, pp. 2074-80.10.1016/j.jmatprotec.2013.06.008 ↗
35. J. Ruiz-Vargas, N. Siredey-Schwaller, N. Gey, P. Bocher, A Hazotte, J. Mater. Proc. Tech., (2013), Vol. 213(1), pp. 20-29.10.1016/j.jmatprotec.2012.07.016 ↗
36. S.K. Tung, L.C. Lim, M.O. Lai, Scripta Materialia, (1996), Vol. 34, pp. 763-769.10.1016/1359-6462(95)00577-3 ↗
37. S. Lebaili, S. Hamar-Thibault, Acta Metall., (1987), Vol. 35(3), pp. 701-710.10.1016/0001-6160(87)90194-5 ↗
38. S. Omori, Y. Hashimoto, K. Shoji, K. Hidaka, Y. Kohira, Funtai Oyobi Funmatsuyakin, (1972), Vol. 18, pp. 316.
39. ASM International Handbook Committee, Volume 6—Welding, Brazing, and Soldering. Materials Park, OH 44073-0002, 1993, 6, pp. 924–30.