Influence of Thermal Aging on Tensile and Low Cycle Fatigue Behavior of Type 316LN Austenitic Stainless Steel Weld Joint
Source abstract
Abstract
Influence of short-term thermal aging on the low-cycle fatigue (LCF) behavior of 316LN austenitic stainless steel weld joint with 0.07 wt pct N has been investigated. Prior thermal exposure was found to improve the fatigue life compared with the as-welded condition. Besides, the treatment also imparted a softening effect on the weld metal, leading to an increase in the ductility of the weld joint which had a bearing on the cyclic stress response. The degree of cyclic hardening was seen to increase after aging. Automated ball-indentation (ABI) technique was employed toward understanding the mechanical properties of individual zones across the weld joint. It was observed that the base metal takes most of the applied cyclic strain during LCF deformation in the as-welded condition. In the aged condition, however, the weld also participates in the cyclic deformation. The beneficial effect of thermal aging on cyclic life is attributed to a reduction in the severity of the metallurgical notch leading to a restoration of ductility of the weld region. The transformation of δ-ferrite to σ-phase during the aging treatment was found to influence the location of crack initiation. Fatigue cracks were found to initiate in the base metal region of the joint in most of the testing conditions. However, embrittlement in the weld metal caused a shift in the point of crack initiation with increasing strain amplitude under LCF.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. S.L. Mannan, S.C. Chetal, Baldev Raj, S.B. Bhoje: Trans. Indian Inst. Met., 2003, vol. 56, pp. 155–178.
2. E. Folkhard: Welding Metallurgy of Stainless Steels, Springer Verlag Wein, New York, NY, 1988.10.1007/978-3-7091-8965-8 ↗
3. R.G. Thomas, D. Yapp: Weld. J., 1978, vol. 57, pp. 361–366.
4. V.S. Raghunathan, V. Seetharaman, S. Venkadesan, P. Rodriguez: Metall. Trans. A, 1979, vol. 10A, pp. 1683–1689.10.1007/BF02811701 ↗
5. G.F. Slattery, S.R. Keown, M.E. Lambert: Met. Technol, 1983, vol. 10, pp. 373-385.10.1179/030716983803291208 ↗
6. T.P.S. Gill, M. Vijayalakshmi, J.B. Gnanamoorthy, K.A. Padmanabhan: Weld. Res. Suppl., 1986, vol. 65, pp. 122–128.
7. MO Malone (1967) Weld. J. Res. Suppl 46:241–253.
8. H. Shaikh, M.G. Pujar, N. Sivaibarasi, P.V. Sivaprasad, H.S. Khatak: Mater. Sci. Tech., 1994, vol. 10, pp. 1096–1103.10.1179/mst.1994.10.12.1096 ↗
9. J.J. Smith, R.A. Farrar: Int. Mater. Rev., 1993, vol. 38, No. 1, pp. 25–51.10.1179/imr.1993.38.1.25 ↗
10. S. Kožuh, M. Gojic´, L. Kosec: Kovove Mater., 2009, vol. 47, pp. 253–262.
11. M. Valsan, D. Sundararaman, K. Bhanu Sankara Rao, S.L. Mannan: Metall. Mater. Trans. A, 1995, vol. 26A, pp.1207–1219.10.1007/BF02670616 ↗
12. E. Yoshihisa, S. Ganesh Sundara Raman: Science and Technology of Welding and Joining, 2000, vol. 5, pp. 174–182.10.1179/136217100101538173 ↗
13. G.V. Prasad Reddy, R. Sandhya, M. Valsan, K.B.S. Rao: Int. J. Fatigue, 2008, vol. 30, pp. 538–546.10.1016/j.ijfatigue.2007.03.009 ↗
14. S.K. Chandra, V. Shankar, K. Mariappan, R. Sandhya, P.C. Chakraborty: Proc. Eng., 2013, vol. 55, pp. 176–180.10.1016/j.proeng.2013.03.239 ↗
15. K. Bhanu Sankara Rao, M. Valsan, S.L. Mannan: Mater. Sci. Eng. A., 1990, vol. 130, pp. 67–82.10.1016/0921-5093(90)90082-E ↗
16. H. Wang, H. Jing, L. Zhao, Y. Han, X. Lv, L. Xu: Mater. Sci. Eng. A, 2017, vol. 690, pp. 16-31.10.1016/j.msea.2017.02.090 ↗
17. M.D. Mathew, G. Sasikala, S.L. Mannan, P. Rodriguez: Mater. Sci. Technol., 1991, vol. 7 (6), pp. 533–536.10.1179/mst.1991.7.6.533 ↗
18. Sunil Goyal, R. Sandhya, M. Valsan, K. Bhanu Sankara Rao: Int. J. Fatigue, 2009, vol. 31, pp. 447–454.10.1016/j.ijfatigue.2008.07.006 ↗
19. FM Haggag, RK Nanstad, JT Hutton, DL Thomas, RL Swain (1990). In: AA Braun, NE Ashbaugh, FM Smith (eds) Applications of Automation Technology to Fatigue and Fracture Testing ASTM 1092. American Society for Testing and Materials, Philadelphia, pp. 188–208.10.1520/STP25039S ↗
20. FM Haggag (1993). In: WR Corwin, FM Haggag, WL Server (eds) Small Specimen Test Techniques Applied to Nuclear Reactor Vessel Thermal Annealing and Plant Life Extension ASTM STP 1204. American Society for Testing and Materials, Philadelphia, pp. 27–44.
21. M.D. Mathew, K.L. Murthy, L.M. Lietzan, V.N. Shah: Mater. Sci. Eng. A, 1999, vol. 269, pp. 186–196.10.1016/S0921-5093(99)00140-9 ↗
22. M.D. Mathew, K.L. Murty, K.B.S. Rao, S.L. Mannan: Mater. Sci. Eng. A, 1999, vol. 264, pp.159–166.10.1016/S0921-5093(98)01098-3 ↗
23. K.L. Murthy, P.Q. Miraglia, M.D. Mathew, V.N. Shah, F.M. Haggag: Int. J. Press. Vess. Pip., 1999, Vol. 76, pp. 361–369.10.1016/S0308-0161(99)00006-X ↗
24. G. Das, M. Das, S. Sinha, K.K. Gupta, S. Chakrabarthy, A.K. Ray: Mater. Sci. Eng. A, 2009, Vol. 51, (3–514), pp. 389–393.10.1016/j.msea.2009.02.007 ↗
25. J.F. Zarzour, P.J. Konkol, H. Dong: Mater. Charact., 1996, vol. 37, pp. 195–209.10.1016/S1044-5803(96)00128-3 ↗
26. J Ganesh Kumar, VD Vijayanand, M Nandagopal, K Laha (2015) Mater. High Temp., 32:619–626.10.1179/1878641315Y.0000000008 ↗
27. H.K. Khandelwal, K. Sharma, R. Chhibber: J. Minerals Mater. Charact. Engg., 2012, vol. 11, pp. 1095–1100.
28. S. Wu, T. Xu, M. Song, K. Guan: Mater. High Temp., 2016, vol. 33, pp. 270–275.10.1080/09603409.2016.1187463 ↗
29. T.P.S. Gill, M. Vijayalakshmi, P. Rodriguez, K.A. Padmanabhan: Metall. Mater. Trans. A, 1989, vol. 20A, pp. 1115–1124.10.1007/BF02650146 ↗
30. V.S. Srinivasan, M. Valsan, R. Sandhya, K. Bhanu Sankara Rao, S.L. Mannan, D.H. Sastry: Int. J. Fatigue, 1999, vol. 21, pp.11–21.10.1016/S0142-1123(98)00052-8 ↗
31. G.V. Prasad Reddy, R. Sandhya, S. Sankaran, M.D. Mathew: Metall. Mater. Trans. A, 2014, vol. 45, pp. 5044–5056.10.1007/s11661-014-2428-5 ↗
32. V.S. Srinivasan, R. Sandhya, K. Bhanu Sankara Rao, S.L. Mannan, K.S. Raghavan: Int. J. Fatigue, 1991, vol.13, pp. 471–478.10.1016/0142-1123(91)90482-E ↗
33. D. Sundararaman, P. Shankar, V.S. Raghunathan: Metall. Mater. Trans. A, 1996, vol. 27(5), pp. 1175–1186.10.1007/BF02649856 ↗
34. D.W. Kim, W.-S. Ryu, J.H. Hong, S.K. Choi: J. Nucl. Mater, 1998, vol. 254, pp.226–233.10.1016/S0022-3115(97)00360-7 ↗
35. V.S. Srinivasan, R. Sandhya, M. Valsan, K.B.S. Rao, S.L. Mannan, D.H. Sastry: Scripta Mater., 1997, vol. 37 (10), pp. 1593–1598.10.1016/S1359-6462(97)00282-0 ↗
36. S. Hasebe, T. Asayama: Mater. Sci. Res. Int., 1997, vol. 3 (3), pp. 178–184.
37. G. Sasikala, S.K. Ray, S.L. Mannan: Mater. Sci. Eng. A, 2003, vol. 359, pp. 86-90.10.1016/S0921-5093(03)00371-X ↗
38. C. Laird, Z. Wang, B.T. Ma, H.F. Chai: Mater. Sci. Eng. A, 1989, vol. 113, pp. 245-257.10.1016/0921-5093(89)90313-4 ↗
39. GV PrasadReddy, R Sandhya, M Valsan, KBS Rao (2010) Mater. Sci. Technol. 26:1384–1392.10.1179/174328408X317110 ↗
40. Vani Shankar, K. Mariappan, R. Sandhya, K. Laha: Int. J. Fatigue, 2016, vol. 82, pp. 487–496.10.1016/j.ijfatigue.2015.09.003 ↗
41. F. Liu, Y.H. Hwang, S.W. Nam: Mater. Sci. Eng. A, 2006, vol.427, pp. 35–41.10.1016/j.msea.2006.03.105 ↗
42. Meyer E, Zeits D (1980) Ver Deut Ing 52:645.
43. ASTM E646-07: ‘Standard test method for tensile strain hardening exponents (n-values) of metallic sheet materials’; 2007, Philadelphia, American Society for Testing and Materials.
44. D. Tabor: The Hardness of Metals, Oxford University Press, New York, NY, 1951.