journal article·2018-03

High Temperature Elastic Properties of Reduced Activation Ferritic-Martensitic (RAFM) Steel Using Impulse Excitation Technique

Haraprasanna Tripathy, Subramanian Raju, Raj Narayan Hajra, Saroja Saibaba

Publisher page

Abstract

The polycrystalline elastic constants of an indigenous variant of 9Cr-1W-based reduced activation ferritic-martensitic (RAFM) steel have been determined as a function of temperature from 298 K to 1323 K (25 °C to 1000 °C), using impulse excitation technique (IET). The three elastic constants namely, Young’s modulus E, shear modulus G, and bulk modulus B, exhibited significant softening with increasing temperature, in a pronounced non-linear fashion. In addition, clearly marked discontinuities in their temperature variations are noticed in the region, where ferrite + carbides → austenite phase transformation occurred upon heating. Further, the incidence of austenite → martensite transformation upon cooling has also been marked by a step-like jump in both elastic E and shear moduli G. The martensite start Ms and Mf finish temperatures estimated from this study are, Ms = 652 K (379 °C) and Mf =580 K (307 °C). Similarly, the measured ferrite + carbide → austenite transformation onset (Ac1) and completion (Ac3) temperatures are found to be 1126 K and 1143 K (853 °C and 870 °C), respectively. The Poisson ratio μ exhibited distinct discontinuities at phase transformation temperatures; but however, is found to vary in the range 0.27 to 0.29. The room temperature estimates of E, G, and μ for normalized and tempered microstructure are found to be 219 GPa, 86.65 GPa, and 0.27, respectively. For the metastable austenite phase, the corresponding values are: 197 GPa, 76.5 GPa, and 0.29, respectively. The measured elastic properties as well as their temperature dependencies are found to be in good accord with reported estimates for other 9Cr-based ferritic-martensitic steel grades. Estimates of θ D , the elastic Debye temperature and γG, the thermal Gruneisen parameter obtained from measured bulk elastic properties are found to be θ D = 465 K (192 °C) and γG = 1.57.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. G. Grimvall: Thermophysical Properties of Materials, 2nd ed., North-Holland, Elsevier, Amsterdam, 1999, pp. 37-68.
2. Ledbetter H (1983) Elastic Properties, In: Reed RP, Clark AR (eds) Materials at low temperatures American Society of Metals, Metals Park, pp. 1-45.
3. Ledbetter H (2006) Mater. Sci. Eng, A, 442:31-34.10.1016/j.msea.2006.04.147 ↗
4. A. Migliori, J. P. Baiardo and T. W. Darling: Los Alamos Science, 2000, No. 26, pp. 208-225.
5. Y. Wang, J. J. Wang, H. Zhang, V. R. Manga, S. L. Shang, L -Q Chen, Z-K Liu: J. Phys 2010, 22:1-8
6. D. C. Wallace: Statistical Physics of Crystals and Liquids, World Scientific Pub., Singapore, 2002, pp. 1-303.
7. Stixrude L (2001) Microscopic Theory of Elastic Constants Handbook of Elastic Properties of Solids, Liquids, and Gases. In: Levy M, Bass H, Stern R (eds.) Vol II: Elastic Properties of Solids. Academic Press, Boston, pp. 640-671.
8. Y. Ikeda: Mater. Trans. JIM, 1997, Vol. 38, pp.761-770.10.2320/matertrans1989.38.761 ↗
9. Mehl MJ, Klein BM, Papaconstantopoulos DA (1994) First Principles Calculation of Elastic Properties. In: J. H. Westbrook and R. L. Fleischer (eds) Intermetallic Compounds, Vol. I: Principles. John Wiley, Chichester, pp. 195-210.
10. Anderson OL (1995) Equations of State for Solids in Geophysics and Ceramic Science. Oxford University Press, New York, pp. 1-383.10.1093/oso/9780195056068.001.0001 ↗
11. S. Raju and A. K. Rai: J. Nucl. Mater., 2010, Vol. 408, pp.40-44.10.1016/j.jnucmat.2010.10.064 ↗
12. S. Raju, K. Sivasubramanian and E. Mohandas: Scripta Mater., 2001, Vol. 44 pp. 269-274.10.1016/S1359-6462(00)00574-1 ↗
13. S. Raju, K. Sivasubramanian and E. Mohandas: Solid St. Commun., 2002, Vol. 124, pp. 151–156.10.1016/S0038-1098(02)00451-9 ↗
14. Michel H. G. Jacobs and Harry A. J. Oonk: Phys. Chem. Chem. Phys., 2000, Vol. 2, pp. 2641-2646.
15. G. Simmons and H. Wang: Single crystal elastic constants and calculated aggregate properties: A handbook, II edition, 1971, MIT Press, Cambridge, Mass, pp.1-370.
16. Hearmon RFS (1979) Landolt Bornstein Numerical Data and Functional Relationships in Science and Technology. In: Hellwege K-H (ed) Elastic, Piezoelectric, Pyroelectric, Piezooptic, Electrooptic Constants, and Nonlinear Dielectric Susceptibilities of Crystal. Springer, Berlin, pp. 1–244.
17. H. Wawra: Zeit. fur Metallkunde, 1978, Vol. 69, pp. 518-523.
18. Isaak DG (2001) Elastic properties of minerals and planetary objects. In: Levy M, Bass H, Stern R (eds) Handbook of Elastic Properties of Solids, Liquids, and Gases Volume III: Biological and Organic Materials Earth and Marine Sciences. Academic Press, Boston, pp. 325-376.
19. G. R. Speich, A. J. Schwoeble and W. C. Leslie: Metall. Trans., 1972, Vol.3, pp. 2031-2037.10.1007/BF02643211 ↗
20. Ledbetter H, Kim S (2001) Monocrystal Elastic Constants and Derived Properties of the Cubic and the Hexagonal Elements. In: In: Levy M, Bass H, Stern R (eds) Handbook of Elastic Properties of Solids Liquids and Gases Volume II: Elastic Properties of Solids. Academic Press, Boston, pp. 97-106.
21. Hassel Ledbetter: Cryogenics, 1982, Vol. 22, pp. 653-656.10.1016/0011-2275(82)90072-8 ↗
22. W. F. Weston, H. M. Ledbetter and E. R. Naimon: Mater. Sci. Engg,.1975, Vol. 20, pp. 185-194.10.1016/0025-5416(75)90148-2 ↗
23. H. M. Ledbetter, M. W. Austin and S. A. Kim: Mater. Sci. Engg., 1987, Vol.85, pp. 85-89.10.1016/0025-5416(87)90470-8 ↗
24. Ulrich Bohnenkamp and Rolf Sandstrom: Steel Res., 2000, Vol. 71, pp. 94-99.10.1002/srin.200005696 ↗
25. T. Darling, A. Migliori, P.E. Armstrong, R. Vaidya, C. Scherer and T. Lowe: Reports on the measurement of elastic properties of 51XX series of steels for the heat treatment distortion project, Los Alamos Report, LA-UR-97, 1997, pp. 1–64.
26. S. Sharafat, G.R. Odette and J. Blanchard: J. Nucl. Mater., 2009, Vol. 386-388, pp.896–899.10.1016/j.jnucmat.2008.12.325 ↗
27. K. Laha, S. Saroja, A. Moitra, R. Sandhya, M. D. Mathew, T. Jayakumar and E. Rajendra Kumar: J. Nucl. Mater., 2013, Vol. 439, pp. 41-50.10.1016/j.jnucmat.2013.03.073 ↗
28. N. Baluc, R. Schäublin, P. Spätig and M. Victoria: Nucl. Fusion, 2004, Vol. 44, pp. 56-61.10.1088/0029-5515/44/1/006 ↗
29. S. Raju, B. Jeyaganesh, A. K. Rai, R. Mythili, S. Saroja, E. Mohandas, M. Vijayalakshmi, K. B. S. Rao and Baldev Raj: J. Nucl. Mater., 2009, Vol. 389, pp. 385-393.10.1016/j.jnucmat.2009.02.030 ↗
30. S. Raju, B. Jeyaganesh, A. K. Rai, R. Mythili, S. Saroja and Baldev Raj: J. Nucl. Mater., 2010, Vol. 405, pp.59–69.10.1016/j.jnucmat.2010.07.036 ↗
31. Ravi Kirana, S Raju, R Mythili, S Saibaba, T Jayakumar, and E Rajendra Kumar: Steel Res., 2015, Vol. 86, pp. 825-840.10.1002/srin.201400183 ↗
32. Ravikirana, R. Mythili, S Raju, S Saroja, G. Paneerselvam, T Jayakumar and E. Rajendra Kumar: Bull. Mater. Sci., 2014, Vol. 37, pp.1453-1460.10.1007/s12034-014-0096-0 ↗
33. S. Raju, B. Jeyaganesh, A. K. Rai, S. Saroja, E. Mohandas, M. Vijayalakshmi, and Baldev Raj: Int. J. Thermophys., 2010, Vol.31, pp. 399-415.10.1007/s10765-010-0720-1 ↗
34. S. Raju, H. Tripathy, A. K. Rai, R. N. Hajra, S. Saroja, T Jayakumar and E. Rajendra Kumar: J. Nucl. Mater., 2015, Vol. 459, pp.150–158.10.1016/j.jnucmat.2015.01.026 ↗
35. M. D. Mathew, J. Vanaja, K. Laha, G. Varaprasad Reddy, K. S. Chandravathi and K. Bhanu Sankara Rao: J. Nucl. Mater., 2011, Vol. 417, pp.77-80.10.1016/j.jnucmat.2011.01.058 ↗
36. R. Sandhya, Vani Shankar, K. Mariappan, M. D. Mathew, T. Jayakumar and E. Rajendra Kumar, Adv. Mater. Res., 2014, Vol. 891-892, pp. 383-388.10.4028/www.scientific.net/AMR.891-892.383 ↗
37. A. Moitra, A. Das Gupta, S. Sathyanarayanan, G. Sasikala, S. K. Albert, S. Saroja, A. K. Bhaduri, E. Rajendra Kumar and T. Jayakumar: Procedia Engineering, 2014, Vol. 86, pp.258-263.10.1016/j.proeng.2014.11.036 ↗
38. G. Roebben, B. Bollen, A. Brebels, J. Van Humbeeck and O. Van der Biest: Rev. Sci. Instrum., 1997, Vol. 68, pp. 4511-4515.10.1063/1.1148422 ↗
39. G. Roebben, R.–G. Duan, D. Sciti and O. Van der Biest: J. Euro Ceram Soc., 2002, Vol. 22, pp. 2501-2509.10.1016/S0955-2219(02)00111-5 ↗
40. W. Pabst, E. Gregorova and M. Cerny: J. Euro Ceram Soc., 2013, Vol. 33, pp. 3085-3093.10.1016/j.jeurceramsoc.2013.06.012 ↗
41. J. D. Lord and R. Morrell: NPL Measurement Good Practice Guide: Elastic Modulus Measurement, NPL Report, 2006, Teddington, U. K., pp. 1-98.
42. M. Radovic, E. Lora-Curzio and L. Riester: Mater. Sci. Engg. A, 2004, Vol. 368, pp.56-70.10.1016/j.msea.2003.09.080 ↗
43. Javier Etcheverry, Gustavo Sanchez, Nicholas Bonades and Leandro Iglesias Raggu: IV Congresso Iberoamericano de Acoustica, 2008, FIA A025, pp.1-5.
44. A. K. Swarnakar, S. Giménez, S. Salehi, J. Vleugels and O. Van der Biest: Key Engg. Mater., 2007, Vol. 333, pp.235-238.10.4028/www.scientific.net/KEM.333.235 ↗
45. A. Brebels and B. Bollen: Non destructive evaluation of materials properties as a function of temperature, in: NDE India-2014, Conference Proceedings, 2015, Vol. 20, No.6, pp. 1–10.
46. ASTM E1876-15: Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio by Impulse Excitation of Vibration, 2015, ASTM International, West Conshohocken, PA, pp. 1-17.
47. ASTM C1259-15: Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration, 2015, ASTM International, West Conshohocken, PA, pp. 1-17.
48. Jeyaganesh B, Raju S, Rai AK, Mohandas E, Vijayalakshmi M, Rao ABS, Raj B (2011) Mater. Sci. Tech. 27:500-512.10.1179/026708309X12506933873260 ↗
49. Hong–Seok Yang and H. K. D. H. Bhadeshia: Scripta Mater., 2009, Vol. 60, pp. 493-495.10.1016/j.scriptamat.2008.11.043 ↗
50. Cast´an T, Vives E, Planes A (1990) J. Phys. 2:1743-1752.
51. Hidenori Terasaki, Hideki Yamagishi, Koji Moriguchi, Yusaku Tomio and Yu-ichi Komizo, ISIJ Int., 2011, Vol.51, pp. 1566-1568.10.2355/isijinternational.51.1566 ↗
52. Bhadeshia H, Honeycombe R (2017) Steels: Microstructure and Properties. 4th edition. Elsevier, London.
53. A.-A. F. Tavassoli, J.-W. Rensman, M. Schirra and K. Shiba: Fusion Eng. & Design, 2002, Vol. 61-62, pp. 617-628.10.1016/S0920-3796(02)00255-7 ↗
54. Yin YF, Faulkner RG (2008) Physical and elastic properties of creep resistant steels. In: Abe F, Kern T-U, Viswanathan R (eds.) Creep-resistant steels. Woodhead Pub Co, Cambridge, pp. 217-240.10.1533/9781845694012.2.217 ↗
55. K. Haarmann, J. C. Vaillant, B. Vandenberghe, W. Bendick and A. Arbab: The T91/P91 Book, 2002, Vallourec and Mannesmann tubes, Boulogne.
56. Richardot D, Vaillant JC, Arbab A, Bendick W (2000) The T92/P92 book. Vallourec & Mannesmann tubes, Boulogne.
57. K. Sawada, T. Ohba, H. Koshima and K. Kimura: Mater. Sci. Engg. A, 2005, Vol. 394, pp. 36-42.10.1016/j.msea.2004.10.041 ↗
58. B. A. Latella and S. R. Humphries: Scripta Metall., 2004, Vol. 51, pp. 635-639.10.1016/j.scriptamat.2004.06.028 ↗
59. http://www.matweb.com/
60. Kim SA, Johnson WL (2007) Mater. Sci. Engg. A 452-453:633-63910.1016/j.msea.2006.11.147 ↗
61. G. R. Speich and W. C. Leslie: Metall. Trans., 1973, Vol.4, pp. 1873-1875.10.1007/BF02665415 ↗
62. S. Raju, B. Jeyaganesh, A. Banerjee and E. Mohandas: Mater. Sci. Eng. A, 2007, Vol. 465, pp. 29-37.10.1016/j.msea.2007.01.127 ↗
63. H. Ledbetter: Phys. Stat. Solidi B, 1994, Vol. 181, pp. 81-85.10.1002/pssb.2221810109 ↗
64. S. Raju and A. K. Rai: J. Nucl. Mater., 2011, Vol. 408, pp. 40-44.10.1016/j.jnucmat.2010.10.064 ↗