journal article·2018-01Open access

The Influence of Strain Path on Rare Earth Recrystallization Textures in a Magnesium-Zinc-Rare Earth Alloy

D. Griffiths, B. Davis, J. D. Robson

Abstract

Abstract In this study, the effect of strain path on texture evolution during cold rolled and annealing of hot rolled Mg-Zn-Rare-Earth (RE) alloy (ZEK100) sheet has been investigated. Strain path during cold rolling has been varied by changing rolling direction with respect to the original hot rolling (HR) direction of the sheet. Cold rolling either parallel or perpendicular to the HR direction leads to spread and split of basal poles in the transverse direction (TD) during annealing, characteristic of Mg-Zn-RE alloys. However, when the sheet is continuously rotated between cold rolling passes, this texture spread is not produced. It is demonstrated that a change in dislocation activity, as predicted by crystal plasticity modeling, cannot explain the unusual textures developed in Mg-Zn-RE alloys. Instead, the role of strain path in determining shear band evolution is considered to be critical. When shear bands are suppressed by continuously rotating the specimen, the distinct Zn-RE texture is not produced. Furthermore, it is demonstrated the dominance of the TD spread grains emerges gradually during recrystallization, leading to the final observed texture.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. B. L. Mordike, Mater. Sci. Eng. A 2002, vol. 324, pp.103–112.10.1016/S0921-5093(01)01290-4 ↗
2. K. Hantzsche, J. Bohlen, J. Wendt, K. Kainer, S. Yi, D. Letzig, Scripta Mater. 2010, vol. 63, pp. 725–730.10.1016/j.scriptamat.2009.12.033 ↗
3. N. Stanford, D. Atwell, A. Beer, C. Davies, M. R. Barnett, Scripta Mater. 2008, vol. 59, pp. 772–775.10.1016/j.scriptamat.2008.06.008 ↗
4. J. Bohlen, M. R. Nürnberg, J. W. Senn, D. Letzig, S. R. Agnew, Acta Mater. 2007, vol. 55, pp. 2101–2122.10.1016/j.actamat.2006.11.013 ↗
5. J. P. Hadorn, K. Hantzsche, S. B. Yi, J. Bohlen, D. Letzig, J. A. Wollmershauser, S. R. Agnew, Metall. Mater. Trans. A 2012, vol. 43, pp. 1347–1362.10.1007/s11661-011-0923-5 ↗
6. J. P. Hadorn, T. T. Sasaki, T. Nakata, T. Ohkubo, S. Kamado, K. Hono, Scripta Mater. 2014, vol. 93, pp. 28–31.10.1016/j.scriptamat.2014.08.022 ↗
7. J. D. Robson, Metall. Mater. Trans. A 2014, vol. 45, pp. 3205–3212.10.1007/s11661-013-1950-1 ↗
8. M. Bugnet, A. Kula, M. Niewczas, G. A. Botton, Acta Mater. 2014, vol. 79, pp. 66–73.10.1016/j.actamat.2014.06.004 ↗
9. D. Griffiths, Mater. Sci. Tech. 2015, vol. 31, pp. 10–24.10.1179/1743284714Y.0000000632 ↗
10. J. Bohlen, J. Wendt, M. Nienaber, K. U. Kainer, L. Stutz, D. Letzig, Mater. Charact. 2015, vol. 101, pp. 144–152.10.1016/j.matchar.2015.02.002 ↗
11. I. Basu, T. Al-Samman, Acta Mater. 2014, vol. 67, pp. 116–133.10.1016/j.actamat.2013.12.015 ↗
12. T. Al-Samman, X. Li, Mater. Sci. Eng. A 2011, vol. 528, pp. 3809–3822.10.1016/j.msea.2011.01.080 ↗
13. L. W. F. Mackenzie, M. O. Pekguleryuz, Scripta Mater. 2008, vol. 59, pp. 665–668.10.1016/j.scriptamat.2008.05.021 ↗
14. P. Dobron, J. Balík, F. Chmelík, K. Illková, J. Bohlen, D. Letzig, P. Lukáč, J. Alloys Compd. 2014, vol. 558, pp. 628–632.10.1016/j.jallcom.2013.11.142 ↗
15. Z. R. Zeng, M. Z. Bian, S. W. Xu, C. H. J. Davies, N. Birbilis, J. F. Nie, Scripta Mater. 2015, vol. 108, pp. 6–10.10.1016/j.scriptamat.2015.06.009 ↗
16. R. Hielscher, H. Schaeben, J. Appl. Crystall. 2008, vol. 41, pp. 1024–1037.10.1107/S0021889808030112 ↗
17. R. A. Lebensohn, C. N. Tomé, Acta Metall. Mater. 1993, vol. 41, pp. 2611–2624.10.1016/0956-7151(93)90130-K ↗
18. R. A. Lebensohn, C. Tomé, Mater. Sci. Eng. A, vol. 175 pp. 71–82.10.1016/0921-5093(94)91047-2 ↗
19. S. R. Agnew, O. Duygulu, Int. J. Plast. 2005, vol. 21, pp. 1161–1193.10.1016/j.ijplas.2004.05.018 ↗
20. H. Wang, B. Raeisinia, P. D. Wu, S. R. Agnew, C. N. Tomé, Int. J. Solids Struct. 2010, vol. 47, pp. 2905–2917.10.1016/j.ijsolstr.2010.06.016 ↗
21. B. Hutchinson, J. Jain, M. R. Barnett, Acta Mater. 2012, vol. 60, pp. 5391–5398.10.1016/j.actamat.2012.06.057 ↗