Microstructures and Mechanical Properties of as-Drawn and Laboratory Annealed Pearlitic Steel Wires
Source abstract
Abstract
Near eutectoid fully pearlitic wire rod (5.5 mm diameter) was taken through six stages of wire drawing (drawing strains of 0 to 2.47). The as-drawn (AD) wires were further laboratory annealed (LA) to re-austenitize and reform the pearlite. AD and LA grades, for respective wire diameters, had similar pearlite microstructure: interlamellar spacing (λ) and pearlite alignment with the wire axis. However, LA grade had lower hardness (for both phases) and slightly lower fiber texture and residual stresses in ferrite. Surprisingly, essentially identical tensile yield strengths in AD and LA wires, measured at equivalent spacing, were found. The work hardened AD had, as expected, higher torsional yield strengths and lower tensile and torsional ductilities than LA. In both wires, stronger pearlite alignment gave significantly increased torsional ductility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. E. A. Shipley: High-strength steels, The Iron and Steel Institute, London SWI; 1962, pp. 42-45.
2. J. D. Embury and R. M. Fisher: Acta Metall., 1996, vol. 14, pp. 147-159.10.1016/0001-6160(66)90296-3 ↗
3. G. Langford: Metall. Trans., 1970, vol. 1,pp. 465-477.10.1007/BF02811557 ↗
4. G. Langford: Metall. Trans. A, 1977, vol. 8,pp. 861-875.10.1007/BF02661567 ↗
5. M. Zelin: Acta Mater., 2002, vol. 50, pp. 4431-4447.10.1016/S1359-6454(02)00281-1 ↗
6. X. Zhang, A. Godfrey, N. Hansen, X. Huang, W. Liu and Q. Liu: Mater. Charact.,2009, vol. 61,pp. 65-72.10.1016/j.matchar.2009.10.007 ↗
7. X. Zhang, A. Godfrey, X. Huang, N. Hansen and Q. Liu: Acta Mater., 2011, vol. 59, pp. 3422-3430.10.1016/j.actamat.2011.02.017 ↗
8. A.B. Dove: Steel Wire Handbook, vol. 3, 1st ed., The Wire Association, Branford, Connecticut, 1972, pp. 61–65.
9. B. Verlinden, J. Driver, I. Samajdar, and R.D. Doherty: Thermo-Mechanical Processing of Metallic Materials, 1st ed., Pergamon Materials Series, Elsevier, Oxford, 2007, pp. 442–48.
10. J. Toribio: Scr. Mater., 1998, vol. 39, pp. 323-328.10.1016/S1359-6462(98)00166-3 ↗
11. J. Toribio: Mater. Sci. Eng. A, 2004, vol. 387-389, pp. 227-230.10.1016/j.msea.2004.01.084 ↗
12. X. Zhang, A. Godfrey, N. Hansen and X. Huang: Acta Mater., 2013, vol. 61, pp. 4898-4909.10.1016/j.actamat.2013.04.057 ↗
13. F. Fang, Y. Zhao, P. Liu, L. Zhou, X. Hu, X. Zhou and Z. Xie: Mater Sci. and Engg. A, 2014, vol. 608, pp. 11-15.10.1016/j.msea.2014.04.050 ↗
14. W.J. Nam, H.R. Song and C.M. Bae: ISIJ Int., 2005, vol. 45, pp. 1205-1210.10.2355/isijinternational.45.1205 ↗
15. M. W. Krapp, A. Hohenwarter, S. Wurster, B. Yang and R. Pippan: Acta Mater., 2016, vol. 106, pp. 239-248.10.1016/j.actamat.2015.12.037 ↗
16. T. Z. Zhao, S. H. Zhang, G. L. Zhang, H. W. Song and M. Cheng: Mater. Des., 2014, vol. 59, pp. 397-405.10.1016/j.matdes.2014.03.029 ↗
17. V. I. Izotov, V. A. Pozdnyakov, E. V. Lukyanenko and G. A. Filippov: Str. Plast., 2007, vol. 103, pp. 519-529.
18. A. V. Makarov, R. A. Savrai, V. M. Schastlivtesev and L. Y. Egorova: Str. Plast., 2007, vol. 104, pp. 522-534.
19. J. Gil Sevillano: Mater. Sci. Eng., 1975, vol. 21, pp. 221-225.10.1016/0025-5416(75)90218-9 ↗
20. S. Goto, R. Kirchheim, T. Al Kassab and C. Borchers: Trans. Nonferrous Met. Soc. China, 2007, vol. 17, pp. 1129-1138.10.1016/S1003-6326(07)60238-6 ↗
21. K. Van Acker, J. Root, P. Van Houtte, E. Aernoudt: Acta Mater., 1996, vol. 44, pp. 4039–4049.10.1016/S1359-6454(96)00051-1 ↗
22. B. Karlsson and G. Linden: Mater. Sci. Eng., 1975, vol. 17, pp. 153-164.10.1016/0025-5416(75)90039-7 ↗
23. K.T. Park, K. Cho and S, K. Choi: Scr. Mater., 1997, vol. 37, pp. 661-666.10.1016/S1359-6462(97)00138-3 ↗
24. P. Kumar, N.P. Gurao, A. Haldar and S. Suwas: ISIJ Int., 2011, vol. 51, pp. 679-684.10.2355/isijinternational.51.679 ↗
25. A. Durgaprasad, S. K. Giri, S. Lenka, S. Kundu, S. Chandra, S. K. Mishra, R. D. Doherty and I. Samajdar: Acta Mater., 2017, vol. 129, pp. 278-289.10.1016/j.actamat.2017.02.008 ↗
26. R.M. Shemenski, J. Walters and M. Foster: Wire J Intr., 2005, vol. 38, pp. 60-65.
27. G. M. Pharr: Mater. Sci. Eng. A, 1998, vol. 253, pp. 151-159.10.1016/S0921-5093(98)00724-2 ↗
28. P. Van Houtte: The “MTM-FHM” and “MTM-TAY” Software System - Version 2, Manual, Department of MME, KLU Leuven, Belgium, 1995, pp. 5–41.
29. H.J. Bunge: Texture Analysis in Materials Science: Mathematical Methods, Elsevier, Amsterdam, 2013, pp. 119–141.
30. P. Van Houtte and L. De Buyser: Acta Metall. Mater., 1993, vol. 41, pp. 323-336.10.1016/0956-7151(93)90063-X ↗
31. W. F. Hosford Jr: Trans AIME, 1964, vol. 230, pp. 12-15.
32. J. Languillaume, G. Kapelski and B. Baudelet: Acta Mater., 1997, vol. 45, pp. 1201-1212.10.1016/S1359-6454(96)00216-9 ↗
33. F. Yang, C. Ma, J.Q. Jiang, H.P. Feng and S.Y. Zhai: Scr. Mater., 2008, vol. 59, pp. 850-853.10.1016/j.scriptamat.2008.06.048 ↗
34. M. Nikolussi, S.L. Shang, T. Gressmann, A. Leineweber, E.J. Mittemeijer, Y. Wang and Z.K. Liu: Scr Mater., 2008, vol. 59, pp. 814–817.10.1016/j.scriptamat.2008.06.015 ↗
35. D. J. Dever: J Appl Phys., 1972, vol. 43, pp. 3293–3301.10.1063/1.1661710 ↗