Structural Stability of the Metastable β-[(Mo0.5Sn0.5)-(Ti13Zr1)]Nb1 Alloy with Low Young’s Modulus at Different States
Source abstract
Abstract
β-Ti alloys with low Young’s modulus are always formed at the lower critical limit of β stabilization, where the β structure is prone to be destabilized. This present work aims at studying the structural stability of β-Ti alloy [(Mo0.5Sn0.5)-(Ti13Zr1)]Nb1 with low Young’s modulus (E) at different states of suction-cast (SC) and solution-treated (ST), and the deformation mechanisms of this alloy are also discussed. The solution treatment eliminates the composition heterogeneity of the SC alloy, and no second phases are precipitated from the β matrix, as a result of a further decrease of E from 48 GPa (SC) to 43 GPa (ST). After tension deformation, the stress-induced {112} $$ \langle 111\rangle $$ β twinning is dominant in the SC alloy, while the stress-induced phase transformation of β → α″ plays a decisive role in the ST alloy, which results from the different structural stabilities of β matrix at different states. The minor second-phase precipitation renders the matrix with a slightly higher β stability of the SC alloy than that of the ST one.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. M. Abdel-Hady, K. Hinoshita, and M. Morinaga: Scripta Mater., 2006, vol. 55, pp. 477–80.10.1016/j.scriptamat.2006.04.022 ↗
2. M. Nakai, M. Niinomi, X. Zhao, and X. Zhao: Mater. Lett., 2011, vol. 65, pp. 688–90.10.1016/j.matlet.2010.11.006 ↗
3. T. Saito, T. Furuta, J.-H. Hwang, S. Kuramoto, K. Nishino, N. Suzuki, R. Chen, A. Yamada, K. Ito, and Y. Seno: Science, 2003, vol. 300, pp. 464–67.10.1126/science.1081957 ↗
4. M. Niinomi: Mater. Sci. Eng. A, 1998, vol. 243, pp. 231–36.10.1016/S0921-5093(97)00806-X ↗
5. M. Long and H. Rack: Biomaterials, 1998, vol. 19, pp. 1621–39.10.1016/S0142-9612(97)00146-4 ↗
6. Y. Hao, S. Li, S. Sun, C. Zheng, and R. Yang: Acta Biomater., 2007, vol. 3, pp. 277–86.10.1016/j.actbio.2006.11.002 ↗
7. K.K. Wang, L.J. Gustavson, and J.H. Dumbleton: Medical Applications of Titanium and Its Alloys: The Material and Biological Issues, ASTM International, West Conshohocken, PA, 1996.
8. R. Davis, H. Flower, and D. West: J. Mater. Sci., 1979, vol. 14, pp. 712–22.10.1007/BF00772735 ↗
9. Y.L. Hao, R. Yang, M. Niinomi, D. Kuroda, Y.L. Zhou, K. Fukunaga, and A. Suzuki: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3137–44.10.1007/s11661-002-0299-7 ↗
10. Y. Lee and G. Welsch: Mater. Sci. Eng. A, 1990, vol. 128, pp. 77–89.10.1016/0921-5093(90)90097-M ↗
11. B. Hickman: J. Mater. Sci., 1969, vol. 4, pp. 554–63.10.1007/BF00550217 ↗
12. W. Ho: J. Med. Biol. Eng., 2008, vol. 28, pp. 47–51.
13. Z. Fan and A. Miodownik: J. Mater. Sci., 1994, vol. 29, pp. 6403–12.10.1007/BF00353996 ↗
14. S. Hanada and O. Izumi: Metall. Trans. A, 1987, vol. 18A, pp. 265–71.10.1007/BF02825707 ↗
15. R. Talling, R. Dashwood, M. Jackson, and D. Dye: Acta Mater., 2009, vol. 57, pp. 1188–98.10.1016/j.actamat.2008.11.013 ↗
16. N. Sakaguchi, M. Niinomi, T. Akahori, J. Takeda, and H. Toda: Mater. Sci. Eng. C, 2005, vol. 25, pp. 370–76.10.1016/j.msec.2005.04.003 ↗
17. N. Sakaguch, M. Niinomi, and T. Akahori: Mater. Trans., 2004, vol. 45, pp. 1113–19.10.2320/matertrans.45.1113 ↗
18. M. Ahmed, D. Wexler, G. Casillas, O.M. Ivasishin, and E.V. Pereloma: Acta Mater., 2015, vol. 84, pp. 124–35.10.1016/j.actamat.2014.10.043 ↗
19. T. Grosdidier and M.-J. Philippe: Mater. Sci. Eng. A, 2000, vol. 291, pp. 218–23.10.1016/S0921-5093(00)00921-7 ↗
20. D. Banerjee and J.C. Williams: Acta Mater., 2013, vol. 61, pp. 844–79.10.1016/j.actamat.2012.10.043 ↗
21. C. Brozek, F. Sun, P. Vermaut, Y. Millet, A. Lenain, D. Embury, P. Jacques, and F. Prima: Scripta Mater., 2016, vol. 114, pp. 60–64.10.1016/j.scriptamat.2015.11.020 ↗
22. S. Kuramoto, T. Furuta, J. Hwang, K. Nishino, and T. Saito: Mater. Sci. Eng. A, 2006, vol. 442, pp. 454–57.10.1016/j.msea.2005.12.089 ↗
23. Q. Li, M. Niinomi, M. Nakai, Z. Cui, S. Zhu, and X. Yang: Mater. Sci. Eng. A, 2012, vol. 536, pp. 197–206.10.1016/j.msea.2011.12.103 ↗
24. M. Hida, E. Sukedai, C. Henmi, K. Sakaue, and H. Terauchi: Acta Metall., 1982, vol. 30, pp. 1471–79.10.1016/0001-6160(82)90167-5 ↗
25. Y. Yang, G. Li, G. Cheng, H. Wang, M. Zhang, F. Xu, and K. Yang: Scripta Mater., 2008, vol. 58, pp. 9–12.10.1016/j.scriptamat.2007.09.010 ↗
26. F. Sun, J. Zhang, M. Marteleur, T. Gloriant, P. Vermaut, D. Laillé, P. Castany, C. Curfs, P. Jacques, and F. Prima: Acta Mater., 2013, vol. 61, pp. 6406–17.10.1016/j.actamat.2013.07.019 ↗
27. H. Matsumoto, S. Watanabe, and S. Hanada: Metall. Mater. Trans. A, 2005, vol. 46A, pp. 1070–78.
28. S. Hanada, N. Masahashi, and T.K. Jung: Mater. Sci. Eng. A, 2013, vol. 588, pp. 403–10.10.1016/j.msea.2013.09.053 ↗
29. R.P. Kolli, W.J. Joost, and S. Ankem: JOM, 2015, vol. 67, pp. 1273–80.10.1007/s11837-015-1411-y ↗
30. Q. Wang, C. Ji, Y. Wang, J. Qiang, and C. Dong: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 1872–79.10.1007/s11661-012-1523-8 ↗
31. C. Pang, B. Jiang, Y. Shi, Q. Wang, and C. Dong: J. Alloys Compd., 2015, vol. 652, pp. 63–69.10.1016/j.jallcom.2015.08.209 ↗
32. A. Takeuchi and A. Inoue: Mater. Trans., 2005, vol. 46, pp. 2817–29.10.2320/matertrans.46.2817 ↗
33. Q. Wang, C. Dong, and P.K. Liaw: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 3440–47.10.1007/s11661-015-2923-3 ↗
34. B.B. Jiang, Q. Wang, D.H. Wen, F. Xu, G.Q. Chen, C. Dong, L.X. Sun, and P K. Liaw: Mater. Sci. Eng. A, 2017, vol. 687, pp. 1–7.10.1016/j.msea.2017.01.047 ↗
35. S. Li, T. Cui, Y. Hao, and R. Yang: Acta Biomater., 2008, vol. 4, pp. 305–17.10.1016/j.actbio.2007.09.009 ↗
36. D. Ping, Y. Mitarai, and F. Yin: Scripta Mater., 2005, vol. 52, pp. 1287–91.10.1016/j.scriptamat.2005.02.029 ↗
37. Y. Hao, S. Li, S. Sun, and R. Yang: Mater. Sci. Eng. A, 2006, vol. 441, pp. 112–18.10.1016/j.msea.2006.09.051 ↗
38. W.Q. Song, S. Sun, S. Zhu, G. Wang, J. Wang, and M.S. Dargusch: Mater. Des., 2012, vol. 34, pp. 739–45.10.1016/j.matdes.2011.06.049 ↗
39. Q. Wang, Q. Li, X. Li, R. Zhang, X. Gao, C. Dong, and P.K. Liaw: Metall. Mater. Trans. A, 2005, vol. 46A, pp. 3924–31.
40. P. Laheurte, A. Eberhardt, and M.-J. Philippe: Mater. Sci. Eng. A, 2005, vol. 396, pp. 223–30.10.1016/j.msea.2005.01.022 ↗
41. D.L. Moffat and D.C. Larbalestier: Metall. Trans. A, 1988, vol. 19A, pp. 1677–86.10.1007/BF02645135 ↗
42. T. Ahmed and H.J. Rack: Mater. Sci. Eng. A, 1998, vol. 243, pp. 206–1110.1016/S0921-5093(97)00802-2 ↗
43. T. Li, D. Kent, G. Sha, L.T. Stephenson, A.V. Ceguerra, S.P. Ringer, M.S. Dargusch, and J.M. Cairney: Acta Mater., 2016, vol. 106, pp. 353–66.10.1016/j.actamat.2015.12.046 ↗
44. A. Devaraj, S. Nag, R. Srinivasan, R.E.A. Williams, S. Banerjee, R. Banerjee, and H.L. Fraser: Acta Mater., 2012, vol. 60, pp. 596–609.10.1016/j.actamat.2011.10.008 ↗
45. S. Guo, Q. Meng, X. Zhao, Q. Wei, and H. Xu: Sci. Rep., 2014. doi:10.1038/srep14688.10.1038/srep14688 ↗
46. F. Sun, J. Zhang, M. Marteleur, C. Brozek, E. Rauch, M. Veron, P. Vermaut, P. Jacques, and F. Prima: Scripta Mater., 2015, vol. 94, pp. 17–20.10.1016/j.scriptamat.2014.09.005 ↗
47. Y. Yang, S. Wu, G. Li, Y. Li, Y. Lu, K. Yang, and P. Ge: Acta Mater., 2010, vol. 58, pp. 2778–87.10.1016/j.actamat.2010.01.015 ↗
48. M. Besse, P. Castany, and T. Gloriant: Acta Mater., 2011, vol. 59, pp. 5982–88.10.1016/j.actamat.2011.06.006 ↗
49. Y. Yang, G. Li, H. Wang, S. Wu, L. Zhang, Y. Li, and K. Yang: Scripta Mater., 2012, vol. 66, pp. 211–14.10.1016/j.scriptamat.2011.10.031 ↗
50. S. Guo, Q. Meng, X. Cheng, and X. Zhao: J. Mech. Behav. Biomed. Mater., 2014, vol. 38, pp. 26–32.10.1016/j.jmbbm.2014.06.006 ↗
51. T. Furuta, S. Kuramoto, J. Hwang, K. Nishino, and T. Saito: Mater. Trans., 2005, vol. 46, pp. 3001–07.10.2320/matertrans.46.3001 ↗