High-Temperature Phase Equilibria of Duplex Stainless Steels Assessed with a Novel In-Situ Neutron Scattering Approach
Source abstract
Abstract
Duplex stainless steels are designed to solidify with ferrite as the parent phase, with subsequent austenite formation occurring in the solid state, implying that, thermodynamically, a fully ferritic range should exist at high temperatures. However, computational thermodynamic tools appear currently to overestimate the austenite stability of these systems, and contradictory data exist in the literature. In the present work, the high-temperature phase equilibria of four commercial duplex stainless steel grades, denoted 2304, 2101, 2507, and 3207, with varying alloying levels were assessed by measurements of the austenite-to-ferrite transformation at temperatures approaching 1673 K (1400 °C) using a novel in-situ neutron scattering approach. All grades became fully ferritic at some point during progressive heating. Higher austenite dissolution temperatures were measured for the higher alloyed grades, and for 3207, the temperature range for a single-phase ferritic structure approached zero. The influence of temperatures in the region of austenite dissolution was further evaluated by microstructural characterization using electron backscattered diffraction of isothermally heat-treated and quenched samples. The new experimental data are compared to thermodynamic calculations, and the precision of databases is discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. J.-O. Nilsson: Mater. Sci. Technol., 1992, vol. 8, pp. 685–700.10.1179/mst.1992.8.8.685 ↗
2. S. Hertzman and J. Charles: Rev. Métall., 2012, vol. 108, pp. 413–25.10.1051/metal/2011071 ↗
3. R. Lillbacka, G. Chai, M. Ekh, P. Liu, E. Johnson, and K. Runesson: Acta Mater., 2007, vol. 55, pp. 5359–68.10.1016/j.actamat.2007.05.056 ↗
4. S. Harjo, Y. Tomota, P. Lukas, D. Neov, M. Vrana, P. Mikula, and M. Ono: Acta Mater., 2001, vol. 49, pp. 2471–79.10.1016/S1359-6454(01)00147-1 ↗
5. R.F.A. Jargelius-Pettersson: Corros. Sci., 1999, vol. 41, pp. 1639–64.10.1016/S0010-938X(99)00013-X ↗
6. S.J. Pawel, E.E. Stansbury, and C.D. Lundin: Corrosion, 1989, vol. 45, pp. 125–33.10.5006/1.3577829 ↗
7. H. Okamoto, in Proceedings of the Conference on Applied Stainless Steels ’92, 1992, pp. 360–69.
8. S. Hertzman, B. Brolund, and P. Ferreira: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 277–85.10.1007/s11661-997-0130-6 ↗
9. S. Hertzman, R.J. Pettersson, R. Blom, E. Kivineva, and J. Eriksson: ISIJ Int., 1996, vol. 36, pp. 968–76.10.2355/isijinternational.36.968 ↗
10. D.J. Kotecki, T.A. Siewert, WRC-1992 Constitution Diagram for Stainless Steel Weld Metals: A Modification of the WRC-1988 Diagram, AWS Annual Meeting, 1992, pp. 171–78.
11. A.J. Ramirez, J.C. Lippold, and S.D. Brandi: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1575–97.10.1007/s11661-003-0304-9 ↗
12. T.A. Palmer, J.W. Elmer, and S.S. Babu: Mater. Sci. Eng. A, 2004, vol. 374, pp. 307–21.10.1016/j.msea.2004.03.037 ↗
13. A.J. Studer, M.E. Hagen, and T.J. Noakes: Phys. B Condens. Matter, 2006, vols. 385–386, pp. 1013–15.10.1016/j.physb.2006.05.323 ↗
14. J.O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Calphad, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
15. Thermo-Calc Software AB, TCFE7 Steels/Fe-alloys database version 7.
16. J.W. Elmer, T.A. Palmer, and E.D. Specht: Metall. Mater. Trans. A, 2007, vol. 38A, 464–75.10.1007/s11661-006-9076-3 ↗
17. G. Kurdjumov and G. Sachs: Z. Phys., 1930, vol. 64, pp. 325–43.10.1007/BF01397346 ↗
18. N. Suutala, T. Takalo, and T. Moisio: Metall. Trans. A, 1979, vol. 10A, pp. 1183–90.10.1007/BF02811664 ↗
19. C.H. Shek, C. Dong, J.K.L. Lai, and K.W. Wong: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 15–19.10.1007/s11661-000-0047-9 ↗
20. S. Hertzman: ISIJ Int., 2001, vol. 41, pp. 580–89.10.2355/isijinternational.41.580 ↗
21. T.H. Chen and J.R. Yang: Mater. Sci. Eng. A, 2002, vol. 338, pp. 166–81.10.1016/S0921-5093(02)00065-5 ↗
22. N. Pettersson, R.F.A. Pettersson, and S. Wessman: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 1062–72.10.1007/s11661-014-2718-y ↗
23. Y.-H. Park and Z.-H. Lee: Mater. Sci. Eng. A, 2001, vol. 297, pp. 78–84.10.1016/S0921-5093(00)01263-6 ↗
24. J.D. Katz and T.B. King: Metall. Trans. B, 1989, vol. 20B, pp. 175–85.10.1007/BF02825598 ↗
25. T.A. Palmer and T. Debroy: Weld. Res., 1996, vol. 75, pp. 197–207.
26. P. Hagenfeldt, S. Bernhardsson, S. Lagerberg, High Nitrogen Containing Duplex Stainless Steel Having High Corrosion Resistance and Good Structure Stability, 1988.