Orientation Dependence of Cracking in Hot-Dip Zn-Al-Mg Alloy Coatings on a Sheet Steel
Source abstract
Abstract
The present study was aimed at investigating a basic cause of cracking in hot-dip Zn-Al-Mg alloy coatings on an extra deep drawing quality sheet steel. The electron backscattering diffraction technique was employed to examine the crystallographic planes of the cracks generated before and after bending deformation of the coated steel sheets. It was clarified that the occurrence of cracking in the Zn-Al-Mg alloy coatings absolutely depends on the orientation of the primary Zn and eutectic Zn alloy phases. Finally, a cracking mechanism was proposed on the basis of the anisotropy of thermal expansion and the Young’s modulus in the phases constituting the coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. A.R. Marder: Prog. Mater. Sci., 2000 vol.45, pp. 191-271.10.1016/S0079-6425(98)00006-1 ↗
2. J. Elvins, J.A. Spittle, J.H. Sullivan, D.A. Worsley: Corros. Sci., 2008, vol.50, pp. 1650-58.10.1016/j.corsci.2008.02.005 ↗
3. A. Amadeh, B. Pahlevani, S. Heshmati-Manes: Corros. Sci., 2002, vol.44, pp. 2321-31.10.1016/S0010-938X(02)00043-4 ↗
4. N. LeBozec, D. Thierry, M. Rohwerder, D. Persson, G. Luckeneder: Corros. Sci., 2013, vol. 74, pp. 379-86.10.1016/j.corsci.2013.05.011 ↗
5. D. Yang, J. Chen, Q. Han, K. Liu: J. Rare Earths, 2009, vol.27, pp. 114-18.10.1016/S1002-0721(08)60203-3 ↗
6. Y. Chen, Y. Liu, H. Tu, C. Wu, X. Su, J. Wang: Surf. Coat. Technol., 2015, vol.275, pp. 90-97.10.1016/j.surfcoat.2015.05.034 ↗
7. C. Yao, S.L. Tay, J.H. Yang, T. Zhu, W. Gao: Int. J. Electrochem. Sci., 2014, vol.9, pp.7083-96.10.1016/S1452-3981(23)10953-9 ↗
8. S. Alibeigi, R. Kavitha, R.J. Meguerian, J.R. McDermid: Acta Mater., 2011, vol.59, pp. 3537-49.10.1016/j.actamat.2011.02.027 ↗
9. M. Dutta, A.K. Halder, S.B. Singh: Surf. Coat. Technol., 2010, vol.205, pp. 2578-84.10.1016/j.surfcoat.2010.10.006 ↗
10. A.T. Alpas, J. Inagaki: ISIJ Int., 2000, vol.40, pp. 172-81.10.2355/isijinternational.40.172 ↗
11. S. Ploypech, P. Jearanaisilawong, Y. Boonyongmaneerat: Surf. Coat. Technol., 2013, vol. 223, pp. 1-5.10.1016/j.surfcoat.2013.02.017 ↗
12. D.W. Vallance, D.K. Matlock: JMEPEG, 1992, vol.1, pp. 685-94.10.1007/BF02649250 ↗
13. S. Ploypech, Y. Boonyongmaneerat, P. Jearanaisilawong: Surf. Coat. Technol., 2012, vol. 206, pp. 3758-63.10.1016/j.surfcoat.2012.03.029 ↗
14. G. Reumont, J.B. Vogt, A. Iost, J. Foct: Surf. Coat. Technol., 2001, vol.139, pp. 265-71.10.1016/S0257-8972(01)01017-9 ↗
15. T. Mizuno, H. Mulki: Wear, 1996, vol.198, pp.176-84.10.1016/0043-1648(96)06963-3 ↗
16. H. Asgari, M.R. Toroghinejad, M.A. Golozar: Current Appl. Phys., 2009, vol. 9, pp. 59-66.10.1016/j.cap.2007.10.090 ↗
17. M. Safaeirad, M.R. Toroghinejad, F. Ashrafizadeh: J. Mater. Process. Technol., 2008, vol. 196, pp. 205-12.10.1016/j.jmatprotec.2007.05.035 ↗
18. G. Vincent, N. Bonasso, J.S. Lecomte, B. Colinet, B. Gay, C. Esling: J. Mater. Sci., 2006, vol. 41, pp. 5966-75.10.1007/s10853-006-0274-6 ↗
19. H. Asgari, M.R. Toroghinejad, M.A. Golozar: ISIJ Int., 2008, vol. 48, pp. 628-33.10.2355/isijinternational.48.628 ↗
20. M. Arimura, M. Urai, J. Iwaya and M. Iwai: in Proceedings of galvatech ’95, Chicago, 1995, p. 733.
21. D. Jaffrey, J.D. Browne, T.J. Howard: Metall. Trans. B, 1980, vol.11B, pp. 631-35.10.1007/BF02670143 ↗
22. R. Parisot, S. Forest, A. Pineau, F. Nguyen, X. Demonet, J.M. Mataigne: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 813-23.10.1007/s11661-004-0008-9 ↗
23. E. Tzimas, G. Papadimitriou: Surf. Coat. Technol., 2001, vol. 145, pp. 176-85.10.1016/S0257-8972(01)01323-8 ↗
24. [24] K. Honda, W. Yamada, K. Ushioda: Mater Trans, 2008, vol.49, pp. 1395-1400.10.2320/matertrans.MRA2008009 ↗
25. T. Pusztai, L. Rátkai, A. Szállás, and L. Gránásy: Phys. Rev. E, 2013, vol. 87, pp. 032401(1–4).10.1103/PhysRevE.87.032401 ↗
26. R. Götzinger, M. Barth and D.M. Herlach: J. Appl. Phys., 1998, vol.84, pp. 1643-49.10.1063/1.368233 ↗
27. G. A. Chadwick: Prog. Mater. Sci., vol. 12, 1963–1965, pp. 99–182.10.1016/0079-6425(63)90037-9 ↗
28. Liu, Jones: Acta Metall. Mater., 40, 1992, pp. 229-39.10.1016/0956-7151(92)90298-S ↗
29. H. Baker: Metal Handbook, 9th ed., ASM, Washington DC, 1979, pp. 714-831.
30. D. Tromans: IJRRAS, 2011, vol.6, pp. 462-83.
31. W.D. Callister Jr.: Materials Science and Engineering, 4th ed., John Wiley & Sons, Inc. New York, 1997, pp. 52.
32. N.E. Alekseevskii, N.N. Mikhailov: Soviet Phys. JETP, 1963, vol.16, pp. 1493-95.
33. D.U. Kim, P.R. Cha, S.G. Kim, W.T. Kim, J.H. Cho, H.N. Han, H.J. Lee, J.Y. Kim: Comput. Mater. Sci., 2012, vol.56, pp. 58-68.10.1016/j.commatsci.2011.12.036 ↗