Mechanical Properties and Microstructure of Dissimilar Friction Stir Welds of 11Cr-Ferritic/Martensitic Steel to 316 Stainless Steel
Source abstract
Abstract
Dissimilar joints between ferritic and austenitic steels are of interest for selected applications in next generation fast reactors. In this study, dissimilar friction-stir welding of an 11 pct Cr ferritic/martensitic steel to a 316 austenitic stainless steel was attempted and the mechanical properties and microstructure of the resulting welds were examined. Friction-stir welding produces a stir zone without macroscopic weld-defects, but the two dissimilar steels are not intermixed. The two dissimilar steels are interleaved along a sharp zigzagging interface in the stir zone. During small-sized tensile testing of the stir zone, this sharp interface did not act as a fracture site. Furthermore, the microstructure of the stir zone was refined in both the ferritic/martensitic steel and the 316 stainless steel resulting in improved mechanical properties over the adjacent base material regions. This study demonstrates that friction-stir welding can produce welds between dissimilar steels that contain no macroscopic weld-defects and display suitable mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. T. Kaito, S. Ohtsuka, and M. Inoue: Proceedings Global 2007, Boise, ID, 2007, pp. 37–42.
2. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, and C.J. Dawes: Int. Patent PCT/GB92/02203.
3. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng., R, 2005, vol. 50, pp. 1-78.10.1016/j.mser.2005.07.001 ↗
4. R.S. Mishra and M.W. Mahoney: Friction Stir Welding and Processing, ASM International, Materials Park, 2007.
5. R. Nandan, T. DebRoy, and H.K.D.H. Bhadeshia: Progress Mater. Sci., 2008, vol. 53, pp. 980-1023.10.1016/j.pmatsci.2008.05.001 ↗
6. M. H. Mathon, V. Klosek, Y. de Carlan, and L. Forest: J. Nucl. Mater., 2009, vol. 386-388, pp. 475-478.10.1016/j.jnucmat.2008.12.163 ↗
7. F. Legendre, S. Poissonnet, P. Bonnaillie, L. Boulanger, and L. Forest: J. Nucl. Mater., 2009, vol. 386-388, pp. 537-539.10.1016/j.jnucmat.2008.12.170 ↗
8. C.-L. Chen, G.J. Tatlock, and A.R. Jones: J. Alloys Comp., 2010, vol. 504S, pp. S460-S466.10.1016/j.jallcom.2010.02.192 ↗
9. S. Noh, R. Kasada, A. Kimura, S.H.C. Park, and S. Hirano: J. Nucl. Mater., 2011, vol. 417, pp. 245-248.10.1016/j.jnucmat.2011.01.059 ↗
10. W. Han, S. Ukai, F. Wan, Y. Sato, B. Leng, H. Numata, N. Oono, S. Hayashi, Q. Tang, and Y. Sugino: Mater. Trans., 2012, vol. 53, pp. 390-394.10.2320/matertrans.M2011226 ↗
11. J. Wang, W. Yuan, R.S. Mishra, and I. Charit: J. Nucl. Mater., 2013, vol. 432, pp. 274-280.10.1016/j.jnucmat.2012.08.001 ↗
12. A.K. Lakshminarayanan and V. Balasubramanian: Steel Res. Int., 2010, vol. 81, pp. 1023-1033.10.1002/srin.201000043 ↗
13. A. K. Lakshminarayanan and V. Balasubramanian: Mater. Des., 2010, vol. 31, pp. 4592-4600.10.1016/j.matdes.2010.05.049 ↗
14. H.-H. Cho, H. N. Han, S.-T. Hong, J.-H. Park, Y.-J. Kwon, S.-H. Kim, and R. J. Steel: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2889-2894.10.1016/j.msea.2010.12.061 ↗
15. A. K. Lakshminarayanan and V. Balasubramanian: J. Mater. Eng. Performance, 2012, vol. 21, pp. 530-539.10.1007/s11665-011-9943-y ↗
16. M. B. Bilgin and C. Meran: Mater. Des., 2012, vol. 33, pp. 376-383.10.1016/j.matdes.2011.04.013 ↗
17. Y. Yano, Y. S. Sato, Y. Sekio, S. Ohtsuka, T. Kaito, R. Ogawa, and H. Kokawa: J. Nucl. Mater., 2013, vol. 442, pp. S524-S528.10.1016/j.jnucmat.2012.10.038 ↗
18. Y. S. Sato, H. Kokawa, Y. Yano, and Y. Sekio: Friction Stir Welding and Processing VII, John Wily & Sons, Inc., Hoboken, NJ, 2013, pp. 91-99.10.1002/9781118658345.ch10 ↗
19. A. P. Reynolds, W. Tang, T. Gnaupel-Herold, and H. Prask: Scripta Mater., 2003, vol. 48, pp. 1289-1294.10.1016/S1359-6462(03)00024-1 ↗
20. S. H. C. Park, Y. S. Sato, H. Kokawa, K. Okamoto, S. Hirano, and M. Inagaki: Scripta Mater., 2003, vol. 49, pp. 1175-1180.10.1016/j.scriptamat.2003.08.022 ↗
21. S. Klingensmith, J. N. DuPont, and A. R. Marder: Weld. J., 2005, vol. 84, pp. 77s-85s.
22. T. Ishikawa, H. Fujii, K. Genchi, S. Iwaki, S. Matsuoka, and K. Nogi: ISIJ Intern., 2009, vol. 49, pp. 897-901.10.2355/isijinternational.49.897 ↗
23. Y. C. Chen, H. Fujii, T. Tsumura, Y. Kitagawa, K. Nakata, K. Ikeuchi, K. Matsubayashi, Y. Michishita, Y. Fujiya, and J. Katoh: J. Nucl. Mater., 2012, vol. 420, pp. 497-500.10.1016/j.jnucmat.2011.10.053 ↗
24. T. Miyazawa, Y. Iwamoto, T. Maruko, and H. Fujii: Sci. Technol. Weld. Joining, 2012, vol. 17, pp. 207-212.10.1179/1362171811Y.0000000096 ↗
25. C. Meran and O. E. Canyurt: J. Achievement Mater. Manuf. Eng., 2010, vol. 43, pp. 432-439.
26. D.-H. Choi, C.-Y. Lee, B.-W. Ahn, Y.-M. Yeon, S.-H. C. Park, Y.-S. Sato, H. Kokawa, and S.-B. Jung: Sci. Technol. Weld. Joining, 2010, vol. 15, pp. 299-304.10.1179/136217109X12577814486737 ↗
27. C.-P. Cheng, H.-M. Lin, and J.-C. Lin, Sci. Technol. Weld. Joining, 2010, vol. 15, pp. 706-711.10.1179/136217110X12785889549507 ↗
28. Y. D. Chung, H. Fujii, Y. Sun, and H. Tanigawa: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5812-5821.10.1016/j.msea.2011.04.023 ↗
29. D. H. Choi, B. W. Ahn, Y. M. Yeon, S. H. C. Park, Y. S. Sato, H. Kokawa, and S. B. Jung: Mater. Trans., 2011, vol. 52, pp. 1500-1505.10.2320/matertrans.M2010438 ↗
30. M. Jafarzadegan, A. H. Feng, A. Abdolla-zadeh, T. Saeid, J. Shen, and H. Assadi: Mater. Characterization, 2012, vol. 74, pp. 28-41.10.1016/j.matchar.2012.09.004 ↗
31. M. Jafarzadegan, A. Abdolla-zadeh, A. H. Feng, T. Saeid, J. Shen, and H. Assadi: J. Mater. Sci. Technol., 2013, vol. 29, pp. 367-372.10.1016/j.jmst.2013.02.008 ↗
32. S. Nomura, S. Shikakura, S. Ukai, I. Seshimo, M. Harada, I. Shibahara, and M. Katsuragawa: Proceedings of the International Conference on Fast Reactors and Related Fuel Cycles, vol. I (7.4), 1991.
33. A. Uehira, S. Ukai, T. Mizuno, T. Asaga, and E. Yoshida: J. Nucl. Sci. Technol., 2000, vol. 37, pp. 780–786.10.1080/18811248.2000.9714956 ↗
34. R. W. K. Honeycombe and H. K. D. H. Bhadeshia, Steels: Microstructure and Properties, 2nd Edn, Edward Arnold, London, 1995.
35. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789-1799.10.1016/S1359-6454(02)00577-3 ↗
36. B. Sonderegger, S. Mitsche, and H. Cerjak: Mater. Characterization, 2007, vol. 58, pp. 874-882.10.1016/j.matchar.2006.08.014 ↗
37. T. L. Dickerson and J. Przydatek: Intern. J. Fatigue, 2003, vol. 25, pp. 1399-1409.10.1016/S0142-1123(03)00060-4 ↗
38. C. Z. Zhou, X. Q. Yang, and G. H. Luan: Mater. Sci. Eng. A, 2006, vol. 418, pp. 155-160.10.1016/j.msea.2005.11.042 ↗
39. C. Mandache, D. Levesque, L. Dobourg, and P. Gougeon, Sci. Technol. Weld. Joining, 2012, vol. 12, pp. 295-303.10.1179/1362171812Y.0000000007 ↗
40. J. Jeon, S. Mironov, Y. S. Sato, H. Kokawa, S. H. C. Park, and S. Hirano: Acta Mater., 2011, vol. 59, pp. 7439-7449.10.1016/j.actamat.2011.09.013 ↗
41. J. Jeon, S. Mironov, Y. S. Sato, H. Kokawa, S. H. C. Park, and S. Hirano: Acta Mater., 2013, vol. 61, pp. 3465-3472.10.1016/j.actamat.2013.02.039 ↗
42. P. J. Ennis, A. Zielinska-Lipiec, O. Wachter, and A. Czyrska-Filemonowicz, Acta Mater., 1997, vol. 45, pp. 4901-4907.10.1016/S1359-6454(97)00176-6 ↗
43. M. Taneike, F. Abe, and K. Sawada: Nature, 2003, vol. 424, pp. 294-296.10.1038/nature01740 ↗
44. M. Taneike, N. Fujitsuna, and F. Abe: Mater. Sci. Technol., 2004, vol. 20, pp. 1455-1461.10.1179/026708304225022322 ↗
45. F.-S. Yin, and W.-S. Jung: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 302-309.10.1007/s11661-008-9716-x ↗
46. L. Béres, A. Balogh, and W. Irmer: Weld. J., 2001, vol. 80, pp. 191s-195s.
47. R. Lindau, and M. Schirra: Fusion Eng. Des., 2001, vol. 58-59, pp. 781-785.10.1016/S0920-3796(01)00562-2 ↗
48. B. Wang, W. Fu, Y. Li, P. Jiang, W. Zhang, and Y. Tian: Mater. Characterization, 2008, vol. 59, pp. 1133-1136.10.1016/j.matchar.2007.08.010 ↗
49. T. J. Lienert, W. L. Stellwag, Jr., B. B. Grimmett, and R. W. Warke: Weld. J., 2003, vol. 82, pp. 1s-9s.10.1179/136217103225008847 ↗
50. L. Cui, H. Fujii, N. Tsuji, K. Nakata, K. Nogi, R. Ikeda, and M. Matsushita: ISIJ Intern., 2007, vol. 47, pp. 299-306.10.2355/isijinternational.47.299 ↗
51. R. H. Kaltenhauser: Metals Eng. Quart., 1971, vol. 11, pp. 41-47.
52. M. C. Balmforth and J. C. Lippold: Weld. J., 2000, vol. 79, pp. 339s-345s.
53. P. Hua, S. Mironov, C. Z. Nie, Y. S. Sato, H. Kokawa, S. H. C. Park, and S. Hirano: Sci. Technol. Weld. Joining, 2014, vol. 19, pp. 76-81.10.1179/1362171813Y.0000000167 ↗