Evolution of Microstructure and Texture During Deformation and Recrystallization of Heavily Rolled Cu-Cu Multilayer
Source abstract
Abstract
A Cu-Cu multilayer processed by accumulative roll bonding was deformed to large strains and further annealed. The texture of the deformed Cu-Cu multilayer differs from the conventional fcc rolling textures in terms of higher fractions of Bs and RD-rotated cube components, compared with the volume fraction of Cu component. The elongated grain shape significantly affects the deformation characteristics. Characteristic microstructural features of both continuous dynamic recrystallization and discontinuous dynamic recrystallization were observed in the microtexture measurements. X-ray texture measurements of annealing of heavily deformed multilayer demonstrate constrained recrystallization and resulted in a bimodal grain size distribution in the annealed material at higher strains. The presence of cube- and BR-oriented grains in the deformed material confirms the oriented nucleation as the major influence on texture change during recrystallization. Persistence of cube component throughout the deformation is attributed to dynamic recrystallization. Evolution of RD-rotated cube is attributed to the deformation of cube components that evolve from dynamic recrystallization. The relaxation of strain components leads to Bs at larger strains. Further, the Bs component is found to recover rather than recrystallize during deformation. The presence of predominantly Cu and Bs orientations surrounding the interface layer suggests constrained annealing behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. L.H. Friedman: Scripta Mater., 2004, vol. 50, pp. 763–767.10.1016/j.scriptamat.2003.11.045 ↗
2. F. Spaepen and D.Y.W. Yu: Scripta Mater., 2004, vol. 50, pp. 729–732.10.1016/j.scriptamat.2003.11.038 ↗
3. R.G. Hoagland, R.J. Kurtz, and C.H. Henager: Scripta Mater., 2004, vol. 50, pp. 775–779.10.1016/j.scriptamat.2003.11.059 ↗
4. R. G. Hoagland, T. E. Mitchell, J. P. Hirth, and H. Kung: Phil. Mag., 2002, vol. 82, pp. 643–664.
5. W.D. Nix: Scripta Mater., 1998, vol. 39, pp. 545–554.10.1016/S1359-6462(98)00195-X ↗
6. K.O. Schweitz, J.Chevallier, J. Bottiger, W. Matz, and N. Schell: Phil. Mag. A, 2001, vol. 81, pp. 2021–2032.10.1080/01418610108216650 ↗
7. P. M. Anderson, J. F. Bingert, A. Misra, and J. P. Hirth: Acta Materia., 2003, vol. 51, pp. 6059–6075.10.1016/S1359-6454(03)00428-2 ↗
8. Y. Jyoko, S. Kashiwabara, and Y. Hayashi: J. Electrochem. Soc., 1997, vol. 144, pp. L5–L8.10.1149/1.1837354 ↗
9. I.J. Beyerlein, N.A. Mara, D. Bhattacharyya, D.J. Alexander, and C.T. Necker: I. J. Plasticity, 2011, vol. 27, pp. 121–146.10.1016/j.ijplas.2010.05.007 ↗
10. J. Wang, I. J. Beyerlein, N. A. Mara, and D. Bhattacharyya: Scripta Mater., 2011, vol. 64, pp. 1083–1086.10.1016/j.scriptamat.2011.02.025 ↗
11. S.C.V. Lim and A.D. Rollett: Mater. Sci. Engg. A, 2009, vol. 520, pp. 189–196.10.1016/j.msea.2009.05.020 ↗
12. Y. Saito, H. Utsunomiya, N. Tsuji and T. Sakai: Acta Mater., 1999, vol. 47, pp. 579–583.10.1016/S1359-6454(98)00365-6 ↗
13. N. Tsuji, Y. Ito, Y. Saito, and Y. Minamino: Scripta Mater., 2002, vol. 47, pp. 893–899.10.1016/S1359-6462(02)00282-8 ↗
14. H. Sieber, J. S. Park, J. Weissmüller and J. H. Perepezko: Acta mater., 2001, vol. 49, pp. 1139–1151.10.1016/S1359-6454(01)00023-4 ↗
15. Chang, M.Y. Zheng, W.M. Gan, K. Wu, E. Maawad and H.G. Brokmeier: Scripta Mater., 2009, vol. 61, pp. 717–720.10.1016/j.scriptamat.2009.06.014 ↗
16. L. Chen, Q. Shi, D. Chen, S. Zhou, J. Wang, and X. Luo: Mater. Sci. Engg. A, 2009, vol. 508, pp. 37–42.10.1016/j.msea.2008.12.018 ↗
17. M. Shaarbaf and M. R. Toroghinejad: Metall. Mater. Trans. A, 2009, vol. 40, pp. 1693–1700.10.1007/s11661-009-9851-z ↗
18. S. A. Hosseini and H. Danesh Manesh: Materials and Design, 2009, vol. 30, pp. 2911–2918.10.1016/j.matdes.2009.01.012 ↗
19. M. Shaarbaf and M.R. Toroghinejad: Mater. Sci. Engg. A, 2008, vol. 473, pp. 28–33.10.1016/j.msea.2007.03.065 ↗
20. S. Roy, S. Singh, S. Suwas, S. Kumar, K. Chattopadhyay: Mater. Sci. Engg. A, 2011, vol. 528, pp. 8469-8478.10.1016/j.msea.2011.07.042 ↗
21. Y. Wang, M. Chen, F. Zhou, and E. Ma: Nature 2002, vol. 419, pp. 912-915.10.1038/nature01133 ↗
22. Y.-H. Zhao, X.-Z. Liao, S. Cheng, E. Ma, and Y. T. Zhu: Adv. Mater. 2006, vol. 18, pp. 2280–2283.10.1002/adma.200600310 ↗
23. E. Ma: Scripta Mater., 2003, vol. 49, pp. 663-668.10.1016/S1359-6462(03)00396-8 ↗
24. N. Takata, S.-H. Lee, and N. Tsuji: Mater. Lett., 2009, vol. 63, pp. 1757–1760.10.1016/j.matlet.2009.05.021 ↗
25. J.-Y. Cho, K. Mirpuri, D.N. Lee, J.-K. An, and J.A. Szpunar: J. Elect. Mater. 2005,, Vol. 34, pp. 53-61.10.1007/s11664-005-0180-8 ↗
26. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier, Oxford 2004.
27. D.P. Filed, D. Dornisch, and H.H. Tong: Scripta Mater., 2001, vol. 45, pp. 1069-1075.10.1016/S1359-6462(01)01141-1 ↗
28. K.N. Tu : J. App. Phy., 2003, vol. 94, pp. 5451- 5473.10.1063/1.1611263 ↗
29. K.S. Suresh, S. Sinha, A. Chaudhary, and S. Suwas: Mater. Char. 2012, vol. 70, pp. 74-82.10.1016/j.matchar.2012.04.017 ↗
30. K. Pawlik, J. Pospiech, and K. Lücke: Texture and Microstructures, 1991, vol. 25, pp. 14-18.
31. F. Kocks, H.-R. Wenk, and C.N. Tomé: Texture and anisotropy, Cambridge University Press, Cambridge, 1998, pp. 473-480.
32. C.N. Tomé and R.A. Lebensohn: Manual for visco plastic self consistent, version 7B, 2007.
33. V. Randle and O. Engler: Introduction to texture analysis, CRC Press, 2002.
34. J. Hirsch, E. Nes, and K. Lücke: Acta Metall., 1998, vol. 35, pp. 427438.
35. H. Jazaeri and F.J. Humphreys: Acta Mater., 2004, vol. 52, pp. 3239–3250.10.1016/j.actamat.2004.03.030 ↗
36. H. Jazaeri and F.J. Humphreys: Acta Mater., 2004, vol. 52, pp. 3251–3262.10.1016/j.actamat.2004.03.031 ↗
37. O. Dolland and E. Nes: Acta Mater., 1996, vol. 44, pp. 1389-1411.10.1016/1359-6454(95)00289-8 ↗
38. T. Leffers and R.K. Ray: Prog. Mater. Sci., 2009, vol. 54, pp. 351-396.10.1016/j.pmatsci.2008.09.002 ↗
39. P. Rodriguez: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2697-2705.10.1007/s11661-004-0215-4 ↗
40. T. Narytani and J. Takamura: Acta Metall. Mater., 1991, vol. 227, pp. 2037-49.10.1016/0956-7151(91)90173-X ↗
41. N.P. Gurao and S. Suwas: App. Phy. Lett., 2004, vol. 94, 191902.10.1063/1.3132085 ↗
42. O.V. Mishin, B. Bay, and D. Juul Jensen: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1653-1662.10.1007/s11661-000-0175-2 ↗
43. O. Engler, M.-Y. Huh, and C.N. Tome: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2299- 2315.10.1007/s11661-000-0146-7 ↗
44. W.C. Liu and J.G. Morris: Metall. Mater. Trans. A, 2005, Vol. 36A, pp. 1329-1338.10.1007/s11661-005-0224-y ↗
45. C.I. Maurice, and J. H. Driver: Acta Mater., 1997, vol. 45, pp. 4627–4638.10.1016/S1359-6454(97)00115-8 ↗
46. R. Lebehnson and T. Leffers: Texture and microstructures, 1999, vol. 31, pp. 217-230.10.1155/TSM.31.217 ↗
47. M.H. Alvi, S.W. Cheong, J.P. Suni, H. Weiland, and A.D. Rollett: Acta Mater., 2008, vol. 56, pp. 3098–3108.10.1016/j.actamat.2008.02.037 ↗
48. L. Delannay, O.V. Mishin, D. Juul Jensen, and P. Van Houtte: Acta Mater., 2001, vol. 49, pp. 2441–2451.10.1016/S1359-6454(01)00150-1 ↗
49. D. Raabe, Z. Zhao, and F. Roters: Scripta Mater., 2004, vol. 50, pp.1085–1090.10.1016/j.scriptamat.2003.11.061 ↗
50. H. E. Vatne, R. Sahani and E. Nes: Acta Mater. 44 p 4447 (1996).10.1016/1359-6454(96)00077-8 ↗