Investigation on the Microstructure and Ductility-Dip Cracking Susceptibility of the Butt Weld Welded with ENiCrFe-7 Nickel-Base Alloy-Covered Electrodes
Source abstract
Abstract
The weld metal of the ENiCrFe-7 nickel-based alloy-covered electrodes was investigated in terms of the microstructure, the grain boundary precipitation, and the ductility-dip cracking (DDC) susceptibility. Besides the dendritic gamma-Ni(Cr,Fe) phase, several types of precipitates dispersed on the austenitic matrix were observed, which were determined to be the Nb-rich MC-type carbides with “Chinese script” morphology and size of approximately 3 to 10 µm, the Mn-rich MO-type oxides with size of approximately 1 to 2 µm, and the spherical Al/Ti-rich oxides with size of less than 1 µm. The discontinuous Cr-rich M23C6-type carbides predominantly precipitate on the grain boundaries, which tend to coarsen during reheating but begin to dissolve above approximately 1273 K (1000 °C). The threshold strain for DDC at each temperature tested shows a certain degree of correlation with the grain boundary carbides. The DDC susceptibility increases sharply as the carbides coarsen in the temperature range of 973 K to 1223 K (700 °C to 950 °C). The growth and dissolution of the carbides during the welding heat cycles deteriorate the grain boundaries and increase the DDC susceptibility. The weld metal exhibits the minimum threshold strain of approximately 2.0 pct at 1323 K (1050 °C) and the DTR less than 873 K (600 °C), suggesting that the ENiCrFe-7—covered electrode has less DDC susceptibility than the ERNiCrFe-7 bare electrode but is comparable with the ERNiCrFe-7A.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. D.L. Harrod, R.E. Gold, and R.J. Jacko: J. Opera. Manag., 2001, vol. 53, pp. 14-17.
2. J.J. Kai, G.P. Yu, C.H. Tsai, M.N. Liu, and S.C. Yao: Metall. Trans. A, 1989, vol. 20A, pp. 2057-67.10.1007/BF02650292 ↗
3. N.K. Park, J.J. Kim, Y.S. Chai, and H.S. Lee: Key. Eng. Mater., 2007, vol. 353-358, pp. 1609-13.10.4028/www.scientific.net/KEM.353-358.1609 ↗
4. F.H. Hua and R.B. Rebak: Environ. Crack. Mater., 2008, vol. 2, pp. 123-41.10.1016/B978-008044635-6.50052-2 ↗
5. D.H. Hur, M.S. Choi, D.H. Lee, J.H. Han, and H.S. Shim: J. Nucl. Mater., 2013, vol. 442, pp. 326-29.10.1016/j.jnucmat.2013.09.023 ↗
6. H.T. Lee and T.Y. Kuo: Sci. Technol. Weld. Join., 1999, vol. 4, pp. 246-56.
7. H.T. Lee, S.L. Jeng, C.H. Yen, and T.Y. Kuo: J. Nucl. Mater., 2004, vol. 335, pp. 59-69.10.1016/j.jnucmat.2004.06.004 ↗
8. W. Lin and M. Cola: 78th American Welding Society Annual Meeting, Los Angeles, CA. 1997. pp. 15–16.
9. J.M. Kikel and D.M. Parker: Trends. Weld. Res., 1998, pp. 757–62.
10. J.C. Lippold and N.E. Nissley: Hot. Crack. Phenmo. Welds II, 2008, pp. 409-25.10.1007/978-3-540-78628-3_21 ↗
11. J.C. Lippold and N.E. Nissley: Weld. World., 2007, vol. 51, pp. 24-30.10.1007/BF03266597 ↗
12. M.G. Collins and J.C. Lippold: Weld. J., 2003, vol. 82, pp. 288-95.
13. A.J. Ramirez and J.C. Lippold: Mater. Sci. Eng. A, 2004, vol. 380, pp. 245-58.10.1016/j.msea.2004.03.075 ↗
14. M.G. Collins, A.J. Ramirez, and J.C. Lippold: Weld. J., 2004, vol. 83, pp. 39-49.
15. M.G. Collins and J.C. Lippold: Weld. J., 2009, vol. 88, pp. 131-40.
16. T.Y. Kuo, H.T. Lee, and C.C. Tu: Sci. Technol. Weld. Join., 2003, vol. 8, pp. 39-48.10.1179/136217103225010907 ↗
17. N.E. Nissley and J.C. Lippold: Weld. J., 2003, vol. 82, pp. 355-64.
18. N.E. Nissley and J.C. Lippold: Weld. J., 2008, vol. 87, pp. 257-64.
19. N.E. Nissley, M.G. Collins, and J.C. Lippold: Weld. World., 2002, vol. 46, pp. 32-40.10.1007/BF03263388 ↗
20. A.J. Ramirez and J.C. Lippold: Mater. Sci. Eng. A, 2004, vol. 380, pp. 245-58.10.1016/j.msea.2004.03.075 ↗
21. V.R. Dave, M.J. Cola, M. Kumar, A.J. Schwartz, and G.N.A. Hussen: Weld. J., 2004, vol. 83, pp. 1-5.
22. F.F. Noecker and J.N. Dupont: Weld. J., 2009, vol. 88, pp. 7-20.
23. A.J. Ramirez and J.C. Lippold: Mater. Sci. Eng. A, 2004, vol. 380, pp. 259-71.10.1016/j.msea.2004.03.074 ↗
24. H. Baker: ASM Handbook: Alloy Phase Diagrams, 3rd ed., ASM International, Materials Park, 1992, pp. 3.44-3.5.
25. S.L. Jeng, H.T. Lee, W.P. Rehbach, T.Y. Kuo, T.E. Weirich, and J.P. Mayer: Mater. Sci. Eng. A, 2005, vol. 397, pp. 229-38.10.1016/j.msea.2005.02.042 ↗
26. H.T. Lee, S.L Jeng, and T.Y. Kuo: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1097-1105.10.1007/s11661-003-0129-6 ↗
27. T.M. Angeliu and G.S. Was: Metall. Trans. A, 1990, vol. 21A, pp. 2097-107.10.1007/BF02647868 ↗
28. Y.S. Lim, J.S. Kim, H.P. Kim, and H.D. Cho: J. Nucl. Mater., 2004, vol. 335, pp. 108-14.10.1016/j.jnucmat.2004.07.038 ↗
29. H.U. Hong, B.S. Rho, and S.W. Nam: Mater. Sci. Eng. A, 2001, vol. 318, pp. 285-92.10.1016/S0921-5093(01)01254-0 ↗
30. R. Qin, Z. Duan, and G. He: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4661-70.10.1007/s11661-013-1833-5 ↗
31. K. Kaneko, T. Fukunaga, K. Yamada, N. Nakada, and M. Kikuchi: Scripta Mater., 2011, vol. 65, pp. 509-12.10.1016/j.scriptamat.2011.06.010 ↗
32. E.L. Hall and C.L. Briant: Metall. Trans. A, 1985 vol. 16A, pp. 1225-36.10.1007/BF02670327 ↗
33. H. Naffakh, M. Shamanian, and F. Ashrafizadeh: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2403-15.10.1007/s11661-008-9598-y ↗
34. A.A. Tavassoli and G. Colombe: Metall. Trans. A, 1978, vol. 9, pp. 1203-11.10.1007/BF02652243 ↗
35. C.T. Sims, N.S. Stoloff, and W.C. Hagel: Superalloys II, John Wiley & Sons., New York, NY, 1987, pp. 615.
36. G.Y. Young, T.E. Capobianco, M.A. Penik, B.W. Morris, and J.J. McGee: Weld. J., 2008, vol. 87, pp. 31-43.
37. A.J. Ramirez, J.W. Sowards, and J.C. Lippold: J. Mater. Process. Technol., 2006, vol. 179, pp. 212-8.10.1016/j.jmatprotec.2006.03.095 ↗
38. A.J. Ramirez and C.M. Garzon: in Hot Cracking Phenomena in Welds II, T. Böllinghaus, H. Herold, C.E. Cross, and J.C. Lippold, eds., Springer-Verlag Berlin Heidelberg, Berlin, 2008, pp. 427–53.
39. J.S. Unfried, E.A. Torres, and A.J. Ramirez: in Hot Cracking Phenomena in Welds III, T. Böllinghaus, J. Lippold, and C.E. Cross, eds., Springer-Verlag Berlin Heidelberg, Berlin, 2011, pp. 295–315.10.1007/978-3-642-16864-2_15 ↗
40. R. Qin and G. He: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 1475-84.10.1007/s11661-012-1505-x ↗
41. R. Qin and G. He: Int. J. Heat. Mass Transf, 2014, vol. 78, pp. 1095-104.10.1016/j.ijheatmasstransfer.2014.07.074 ↗
42. M.J. Cieslak: Weld. J., 1981, vol. 70, pp. 49-56.
43. M.J. Cieslak, T.J. Headley, and A.D. Romig: Metall. Trans. A, 1986, vol. 17A, pp. 2035-47.10.1007/BF02645001 ↗
44. V.H.C.D. Albuquerque, C.C. Silva, P.G. Normando, E.P. Moura, and J.M.R.S. Tavares. Mater. Des., 2012, vol. 36, pp. 337-47.10.1016/j.matdes.2011.11.035 ↗
45. D.J. Lee, Y.S. Kim, Y.T. Shin, E.C. Jeon, S.H. Lee, H.J. Lee, S.K. Lee, J.H. Lee, and H.W. Lee: Met. Mater. Int., 2010, vol. 16, pp. 813-17.10.1007/s12540-010-1019-2 ↗
46. P.J. Gibbs, E.D. Moor, M.J. Merwin, B. Clausen, J.G. Speer, and D.K. Matlock: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3691-702.10.1007/s11661-011-0687-y ↗
47. B. Lv, F.C. Zhang, M. Li, R.J. Hou, L.H. Qian, and T.S. Wang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5648-53.10.1016/j.msea.2010.05.023 ↗
48. S.D. Kiser and R. Zhang: ASM Proc. 8th Int. Conf.: Trends. Weld. Res., Pine-Mountain, GA, 2009, pp. 639–44.
49. J.U. Silgada and A.J. Ramirez: Met. Mater. Int., 2014, vol. 20, pp. 297-305.10.1007/s12540-014-1023-z ↗
50. J.U. Silgada and A.J. Ramirez: Met. Mater. Int., 2014, vol. 20, pp. 307-15.10.1007/s12540-014-1022-0 ↗