journal article·2013-08

Facilitating Basal Slip to Increase Deformation Ability in Mg-Mn-Ce Alloy by Textural Reconstruction Using Friction Stir Processing

Feng-chao Liu, Zong-yi Ma, Ming-jen Tan

Publisher page

Abstract

The widespread application of wrought magnesium alloys is hampered by their insufficient formability at room temperature. The tensile ductility of a newly developed Mg-Mn-Ce alloy has been dramatically improved by friction stir processing (FSP). The microstructure of the stir zone was characterized mainly by elongated fine grains which were highly separated by low-angle grain boundaries because of the high contribution of continuous dynamic recrystallization. A new {0002} distribution with high basal plane tilt angles which facilitated 〈a〉 basal slip when the specimens were pulled along the FSP direction was obtained. Both the enhanced basal slip and crystallographic orientation evolution of Mg crystals increased the strain hardening exponent of the FSP specimen, and hence improved its tensile ductility. A material flow model, developed based on the local textural evolution, could reasonably explain the phenomenon that the FSP specimen exhibited warping and a high normal anisotropy ratio during tensile test.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. T.G. Langdon: Mater. Trans., 1999, vol. 40, pp. 716-722.10.2320/matertrans1989.40.716 ↗
2. N. Afrin, D.L. Chen, X. Cao and M. Jahazi: Scripta Mater., 2007, vol. 57, pp. 1004-07.10.1016/j.scriptamat.2007.08.001 ↗
3. G.S. Rao, and Y.V.R.K. Prasad: Metall. Trans., 1982, vol. 13A, pp. 2219-26.10.1007/BF02648393 ↗
4. W.J. Kim, S.W. Chung, C.S. Chung and D. Kum: Acta Mater., 2001, vol. 49, pp. 3337-45.10.1016/S1359-6454(01)00008-8 ↗
5. W.J. Kim, S.I. Hong, Y.S. Kim, S.H. Min, H.T. Jeong and J.D. Lee: Acta Mater., 2003, vol. 51, pp. 3293-3307.10.1016/S1359-6454(03)00161-7 ↗
6. Y.C. Xin, M.Y. Wang, Z. Zeng, G.J. Huang and Q. Liu: Scripta Mater., 2011, vol. 64, pp. 986-89.10.1016/j.scriptamat.2011.02.010 ↗
7. Q. Yang and A.K.Ghosh: Acta Mater., 2006, vol. 54, pp. 5159-70.10.1016/j.actamat.2006.06.043 ↗
8. S.R. Agnew, J.A. Horton, T.M. Lillo and D.W. Brown. Scripta Mater., 2004, vol. 50, pp. 377-81.10.1016/j.scriptamat.2003.10.006 ↗
9. H. Yoshinaga and R. Horiuchi: Trans JIM 1963, vol. 4, pp. 1-8.10.2320/matertrans1960.4.1 ↗
10. T. Obara, H. Yoshinaga and S. Morozumi: Acta Metall., 1973, vol. 21, pp.845-53.10.1016/0001-6160(73)90141-7 ↗
11. M.R. Barnett: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1799-1806.10.1007/s11661-003-0146-5 ↗
12. J. Bohlen, M.R. Nürnberg, J.W. Senn, D. Letzig and S.R. Agnew: Acta Mater., 2007, vol. 55, pp. 2101-12.10.1016/j.actamat.2006.11.013 ↗
13. A. Styczynski, C.Hartig, J. Bohlen, and D. Letzig: Scripta Mater., 2004, vol. 50, pp. 943-47.10.1016/j.scriptamat.2004.01.010 ↗
14. H.L. Ding, L.F. Liu, S. Kamado, W.J. Ding and Y. Kojima: J. Alloy. Compd., 2008, vol. 456, pp. 400-06.10.1016/j.jallcom.2007.02.045 ↗
15. Y. Yoshida, L. Cisar, S. Kamado and Y. Kojima. Mater. Trans., 2003, vol. 44, pp. 468-75.10.2320/matertrans.44.468 ↗
16. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R 2005, vol. 50, pp. 1-78.10.1016/j.mser.2005.07.001 ↗
17. Z.Y. Ma, F.C. Liu and R.S. Mishra: Acta Mater., 2010, vol. 58, pp. 4693-4704.10.1016/j.actamat.2010.05.003 ↗
18. F.C. Liu and Z.Y. Ma: Scripta Mater., 2008, vol. 59, pp. 882-85.10.1016/j.scriptamat.2008.06.035 ↗
19. A.H. Feng and Z.Y. Ma: Scripta Mater., 2007, vol. 56, pp. 397-400.10.1016/j.scriptamat.2006.10.035 ↗
20. A.H. Feng and Z.Y. Ma: Acta Mater., 2009, vol. 57, pp. 4248-60.10.1016/j.actamat.2009.05.022 ↗
21. W. Woo, H. Choo, M.B. Prime, Z. Feng and B. Clausen: Acta Mater., 2008, vol. 56, pp. 1701-11.10.1016/j.actamat.2007.12.020 ↗
22. W. Woo, H. Choo, D.W. Brown, P.K. Liaw, and Z. Feng: Scripta Mater., 2006, vol. 54, pp. 1859-64.10.1016/j.scriptamat.2006.02.019 ↗
23. H.W. Lee, T.S. Lui and L.H. Chen: J. Alloy. Compd. 2009, vol. 475, pp. 139-44.10.1016/j.jallcom.2008.07.010 ↗
24. http://www.stolfig.de/services/forschung.php 2012.
25. S.R. Agnew and O. Duygulu: Int. J. Plasticity, 2005, vol. 21, pp. 1161-93.10.1016/j.ijplas.2004.05.018 ↗
26. S.H. Park, Y.S. Sato and H. Kokawa: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 987-993.10.1007/s11661-003-0228-4 ↗
27. T.U. Seidel and A.P. Reynolds: Metall. Mater. Trans. A. 2001, vol. 32A, pp. 2879-84.10.1007/s11661-001-1038-1 ↗
28. G.R. Cui, Z.Y. Ma, S.X. Li: Acta Mater., 2009, vol. 57, pp. 5718-29.10.1016/j.actamat.2009.07.065 ↗
29. K.N. Krishnan: Mater. Sci. Eng. A, 2002, vol. 327, pp. 246-51.10.1016/S0921-5093(01)01474-5 ↗
30. F.C. Liu and Z.Y. Ma: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2378-88.10.1007/s11661-008-9586-2 ↗
31. J. Chen, H. Fujii, Y.F. Sun, Y. Morisada, K. Kondoh, and K. Hashimoto: Mater. Sci. Eng. A, 2012, vol. 549, pp. 176–84.10.1016/j.msea.2012.04.030 ↗
32. F.C. Liu, B.L. Xiao, K. Wang, and Z.Y. Ma: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4191-96.10.1016/j.msea.2010.03.065 ↗
33. F.C. Liu and Z.Y. Ma: Mater. Sci. Eng. A, 2011, vol. 530, pp. 548-58.10.1016/j.msea.2011.10.018 ↗
34. Q. Yang, B.L. Xiao, Z.Y. Ma, J. Alloy. Compd., 2013, vol. 551, pp. 61-66.10.1016/j.jallcom.2012.10.002 ↗
35. U.F.H.R. Suhuddin, S. Mironov, Y.S. Sato, H. Kokawa and C.W. Lee. Acta Mater., 2009, vol. 57, pp. 5406-18.10.1016/j.actamat.2009.07.041 ↗
36. F.J. Humphreys and M. Hatherly. Recrystallization and Related Annealing Phenomena. Elsevier, Amsterdam, 2004, pp. 415–24.10.1016/B978-008044164-1/50017-7 ↗
37. Y. Iwahashi, Z. Horita, M. Nemoto and T.G. Langdon, Acta Mater., 1997, vol. 45, pp. 4733-41.10.1016/S1359-6454(97)00100-6 ↗
38. M.D. Nave and M.R. Barnett: Scripta Mater., 2004, vol. 51, pp. 881-85.10.1016/j.scriptamat.2004.07.002 ↗
39. A.G. Beer and M.R. Barnett: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1856-67.10.1007/s11661-007-9207-5 ↗
40. T. Al-Samman and G. Gottstein: Mater. Sci. Eng. A, 2008, vol. 490, pp. 411-20.10.1016/j.msea.2008.02.004 ↗
41. Y. Champion, C. Langlois, S.G. Mailly, P. Langlois, J.L. Bonnentien and J. Hÿtch: Science 2003, vol. 300, pp. 310-11.10.1126/science.1081042 ↗
42. D. Jia, Y.M. Wang, K.T. Ramesh, E. Ma, Y.T. Zhu and R.Z. Valiev: Appl. Phys. Lett. 2001, vol. 79, pp. 611-13.10.1063/1.1384000 ↗
43. C.K. Chyung and C.T. Wei: Phil. Mag., 1967, vol. 15, pp. 161-175.10.1080/14786436708230355 ↗
44. V. Jayaram: Acta Metall., 1987 vol. 35, pp. 1307-15.10.1016/0001-6160(87)90012-5 ↗
45. J. Koike and R. Ohyama: Acta Mater., 2005, vol. 53, pp. 1963-72.10.1016/j.actamat.2005.01.008 ↗
46. S.R. Agnew, C.N. Tomé, D.W. Brown, T.M. Holden, and S.C. Vogel: Scripta Mater., 2003, vol. 48, p. 1003-08.10.1016/S1359-6462(02)00591-2 ↗
47. S.R. Agnew, M.H. Yoo, and C.N. Tomé: Acta Mater., 2001, vol. 49, pp. 4277-89.10.1016/S1359-6454(01)00297-X ↗
48. F.C. Liu, Z.N. Yang, C.L. Zheng, and F.C. Zhang: Scripta Mater., 2012, vol. 66, pp. 431-34.10.1016/j.scriptamat.2011.12.005 ↗
49. O. Grassel, L. Kruger, G. Frommeter and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391-1409.10.1016/S0749-6419(00)00015-2 ↗