journal article·2015-07

Texture, Second-Phase Particles, and the Anisotropy of Deformation Behavior in TTMP AZ61

Tracy D. Berman, Tresa M. Pollock, J. Wayne Jones

Publisher page

Abstract

The deformation, damage accumulation, and fracture behavior of thixomolded and thermomechanically processed AZ61 were studied by room temperature uniaxial straining. The material was examined in as-molded, as-rolled, and rolled + annealed conditions. The yield strength and work hardening behavior are controlled primarily by grain size and crystallographic texture, which reaches a maximum of only 4.8 multiples of random density in the as-rolled material. The low degree of texture results in a low degree of plastic anisotropy (Lankford r value), suggesting good formability properties. In addition, it is shown that although the β-phase particles begin to crack as early as 4 pct elongation, their presence does not lead to a decrease in ductility, as β-phase cracks do not coalesce to initiate fracture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (87)

Show source-provided references
1. J.A. Chapman and D.V. Wilson: J. Inst. Met., 1962, vol. 91, pp. 39–40.
2. M.R. Barnett, D.L. Atwell, and A.G. Beer: Mater. Sci. Forum, 2007, vol. 558-559, pp. 433–40.10.4028/www.scientific.net/MSF.558-559.433 ↗
3. A. Yamashita, Z. Horita, and T. Langdon: Mater. Sci. Eng. A, 2001, vol. 300, pp. 142–47.10.1016/S0921-5093(00)01660-9 ↗
4. C.D. Lee: Mater. Sci. Eng. A, 2007, vol. 459, pp. 355–60.10.1016/j.msea.2007.01.008 ↗
5. A. Jain, O. Duygulu, D. Brown, C. Tomé, and S.R. Agnew: Mater. Sci. Eng. A, 2008, vol. 486, pp. 545–55.10.1016/j.msea.2007.09.069 ↗
6. B.Q. Shi, R.S. Chen, and W. Ke: J. Magnes. Alloy., 2013, vol. 1, pp. 210–16.10.1016/j.jma.2013.09.001 ↗
7. A. Sadeghi, S. Shook, and M. Pekguleryuz: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7529–36.10.1016/j.msea.2011.06.060 ↗
8. Q. Miao, L.X. Hu, G.J. Wang, and E. Wang: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6694–6701.10.1016/j.msea.2011.05.023 ↗
9. C.W. Chung, R.G. Ding, Y. Chino, M.A. Hodgson, and W. Gao: IOP Conf. Ser. Mater. Sci. Eng., 2009, vol. 4, p. 012012.10.1088/1757-899X/4/1/012012 ↗
10. T. Mukai, T. Mohri, M. Mabuchi, M. Nakamura, K. Ishikawa, and K. Higashi: Scripta Mater., 1998, vol. 39, pp. 1249–53.10.1016/S1359-6462(98)00296-6 ↗
11. R. Gehrmann, M. Frommert, and G. Gottstein: Mater. Sci. Eng. A, 2005, vol. 395, pp. 338–49.10.1016/j.msea.2005.01.002 ↗
12. S.R. Agnew, J.A. Horton, T.M. Lillo, and D.W. Brown: Scripta Mater., 2004, vol. 50, pp. 377–81.10.1016/j.scriptamat.2003.10.006 ↗
13. T. Mukai, H. Watanabe, K. Ishikawa, and K. Higashi: Mater. Sci. Forum, 2003, vol. 419-422, pp. 171–76.10.4028/www.scientific.net/MSF.419-422.171 ↗
14. D. Wu, R.S. Chen, and E.H. Han: J. Alloys Compd., 2011, vol. 509, pp. 2856–63.10.1016/j.jallcom.2010.11.141 ↗
15. N. Stanford and M.R. Barnett: J. Alloys Compd., 2008, vol. 466, pp. 182–88.10.1016/j.jallcom.2007.11.082 ↗
16. N. Stanford, D. Atwell, and M.R. Barnett: Acta Mater., 2010, vol. 58, pp. 6773–83.10.1016/j.actamat.2010.09.003 ↗
17. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Netherlands, 2004.
18. J.P. Hadorn, K. Hantzsche, S.B. Yi, J. Bohlen, D. Letzig, and S.R. Agnew: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1363–75.10.1007/s11661-011-1018-z ↗
19. A. Luo: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2445–55.10.1007/BF02671259 ↗
20. C.D. Lee: Met. Mater. Int., 2010, vol. 16, pp. 543–51.10.1007/s12540-010-0804-2 ↗
21. Y.Z. Lu, Q.D. Wang, W.J. Ding, X.Q. Zeng, and Y.P. Zhu: Mater. Lett., 2000, vol. 44, pp. 265–68.10.1016/S0167-577X(00)00041-0 ↗
22. C.D. Lee and K.S. Shin: Met. Mater. Int., 2003, vol. 9, pp. 21–27.10.1007/BF03027225 ↗
23. B. Chen, D.L. Lin, L. Jin, X.Q. Zeng, and C. Lu: Mater. Sci. Eng. A, 2008, vol. 483-484, pp. 113–16.10.1016/j.msea.2006.10.199 ↗
24. H.A. Patel, D.L. Chen, S.D. Bhole, and K. Sadayappan: J. Alloys Compd., 2010, vol. 496, pp. 140–48.10.1016/j.jallcom.2010.02.042 ↗
25. Q. Guo, H.G. Yan, Z.H. Chen, and H. Zhang: Trans. Nonferrous Met. Soc. China, 2006, vol. 16, pp. 922–26.10.1016/S1003-6326(06)60352-X ↗
26. J. Song, S.M. Xiong, M. Li, and J.E. Allison: Mater. Sci. Eng. A, 2009, vol. 520, pp. 197–201.10.1016/j.msea.2009.05.042 ↗
27. R.F. Decker, S. Kulkarni, and J. Huang: Magnesium Technology 2009: Proc. TMS, E.A. Nyberg, S.R. Agnew, N.R. Neelameggham, and M.O. Pekguleryuz, eds., TMS, Warrendale, PA, 2009, pp. 357–61.
28. J. Huang, T. Arbel, L. Ligeski, J. Mccaffrey, S. Kulkarni, J.W. Jones, T.M. Pollock, R.F. Decker, and S. Lebeau: Magnesium Technology 2010: Proc. TMS, S.R. Agnew, N.R. Neelameggham, E.A. Nyberg, and W.H. Sillekens, eds., TMS, Warrendale, PA, 2010, pp. 489–93.
29. R. F. Decker: Solid State Phenom., 2012, vol. 192-193, pp. 47–57.10.4028/www.scientific.net/SSP.192-193.47 ↗
30. F. Czerwinski, A. Zielinska-Lipiec, P.J. Pinet, and J. Overbeeke: Acta Mater., 2001, vol. 49, pp. 1225–35.10.1016/S1359-6454(01)00015-5 ↗
31. T.D. Berman, W. Donlon, R.F. Decker, J. Huang, T.M. Pollock, and J.W. Jones: Magnesium Technology 2011: Proc. TMS, W.H. Sillekens, S.R. Agnew, N.R. Neelameggham, and S.N. Mathaudhu, eds., Wiley, Hoboken, NJ, 2011, pp. 599–603.10.1002/9781118062029.ch110 ↗
32. T.D. Berman, W. Donlon, R.F. Decker, J. Huang, T.M. Pollock, and J.W. Jones: Magnesium: Proc. 9th Int. Conf. Magnesium Alloys and Their Applications, W.J. Poole and K.U. Kainer, eds., ICMAA2012, Vancouver, 2012, pp. 571–78.
33. T.D. Berman, W. Donlon, V.M. Miller, R.F. Decker, J. Huang, T.M. Pollock, and J.W. Jones: Magnesium Technology 2012: Proc. TMS, S.N. Mathaudhu, W.H. Sillekens, N. Hort, and N.R. Neelameggham, eds., Wiley, Hoboken, 2012, pp. 339–44.10.1002/9781118359228.ch62 ↗
34. T.D. Berman, W. Donlon, C.K. Hung, P. Milligan, R.F. Decker, T.M. Pollock, and J.W. Jones: Magnesium Technology 2013: Proc. TMS, N. Hort, S.N. Mathaudhu, N.R. Neelameggham, and M. Alderman, eds., Wiley, Hoboken, 2013, pp. 113–18.10.1002/9781118663004.ch19 ↗
35. T.D. Berman, W. Donlon, R.F. Decker, T.M. Pollock, and J.W. Jones: Magnesium Technology 2014: Proc. TMS, M. Alderman, M.V. Manuel, N. Hort, and N.R. Neelameggham, eds., Wiley, Hoboken, 2014, pp. 161–66.10.1002/9781118888179.ch33 ↗
36. A.A. Nayeb-Hashemi: Phase Diagrams of Binary Magnesium Alloys, ASM International, Metals Park, Ohio, 1988.
37. W.T. Lankford, S.C. Snyder, and J.A. Bauscher: Trans. Am. Soc. Met., 1950, vol. 42, pp. 1197–1232.
38. T.D. Berman: Ph.D. Thesis, University of Michigan, Ann Arbor, 2014.
39. F. Bachmann, R. Hielscher, and H. Schaeben: Solid State Phenom., 2010, vol. 160, pp. 63–68.10.4028/www.scientific.net/SSP.160.63 ↗
40. G. Proust, C.N. Tomé, and G.C. Kaschner: Acta Mater., 2007, vol. 55, pp. 2137–48.10.1016/j.actamat.2006.11.017 ↗
41. B.S. Fromm, B.L. Adams, S. Ahmadi, and M. Knezevic: Acta Mater., 2009, vol. 57, pp. 2339–48.10.1016/j.actamat.2008.12.037 ↗
42. W. Yuan, S.K. Panigrahi, J.-Q. Su, and R.S. Mishra: Scripta Mater., 2011, vol. 65, pp. 994–97.10.1016/j.scriptamat.2011.08.028 ↗
43. G. Bhargava, W. Yuan, S.S. Webb, and R.S. Mishra: Metall. Mater. Trans. A, 2009, vol. 41A, pp. 13–17.
44. N. Stanford and M.R. Barnett: Int. J. Plast., 2013, vol. 47, pp. 165–81.10.1016/j.ijplas.2013.01.012 ↗
45. M.R. Barnett, Z. Keshavarz, A.G. Beer, and D. Atwell: Acta Mater., 2004, vol. 52, pp. 5093–5103.10.1016/j.actamat.2004.07.015 ↗
46. J. Bohlen, P. Dobron, J. Swiostek, D. Letzig, F. Chmelik, P. Lukac, and K.U. Kainer: Mater. Sci. Eng. A, 2007, vol. 462, pp. 302–06.10.1016/j.msea.2006.02.470 ↗
47. L.L. Chang, Y.N. Wang, X. Zhao, and M. Qi: Mater. Charact., 2009, vol. 60, pp. 991–94.10.1016/j.matchar.2009.04.001 ↗
48. Y. Chino, M. Mabuchi, R. Kishihara, H. Hosokawa, Y. Yamada, C. Wen, K. Shimojima, and H. Iwasaki: Mater. Trans., 2002, vol. 43, pp. 2554–60.10.2320/matertrans.43.2554 ↗
49. J.A. del Valle, F. Carreño, and O.A. Ruano: Acta Mater., 2006, vol. 54, pp. 4247–59.10.1016/j.actamat.2006.05.018 ↗
50. W.J. Kim, J.B. Lee, W.Y. Kim, H.T. Jeong, and H.G. Jeong: Scripta Mater., 2007, vol. 56, pp. 309–12.10.1016/j.scriptamat.2006.09.034 ↗
51. N. Ono, K. Nakamura, and S. Miura: Mater. Sci. Forum, 2003, vol. 419-422, pp. 195–200.10.4028/www.scientific.net/MSF.419-422.195 ↗
52. W.J. Kim, C.W. An, Y.S. Kim, and S.I. Hong: Scripta Mater., 2002, vol. 47, pp. 39–44.10.1016/S1359-6462(02)00094-5 ↗
53. C.D. Lee: Mater. Sci. Eng. A, 2007, vol. 454-455, pp. 575–80.10.1016/j.msea.2006.11.064 ↗
54. P. Sharifi, Y. Fan, J.P. Weiler, and J.T. Wood: J. Alloys Compd., 2014, vol. 605, pp. 237–43.10.1016/j.jallcom.2014.03.043 ↗
55. Y. Chino and M. Mabuchi: Adv. Eng. Mater., 2001, vol. 3, pp. 981-83.10.1002/1527-2648(200112)3:12<981::AID-ADEM981>3.0.CO;2-X ↗
56. R.W. Armstrong: Acta Metall., 1968, vol. 16, pp. 347–55.10.1016/0001-6160(68)90021-7 ↗
57. G. Sambasiva Rao and Y.V.R.K. Prasad: Metall. Trans. A, 1982, vol. 13A, pp. 2219–26.
58. S.R. Agnew: Magnesium Technology 2002: Proc. TMS, H.I. Kaplan, ed., TMS, Warrendale, PA, 2002, pp. 169–74.
59. J. Bohlen, M.R. Nurnberg, J.W. Senn, D. Letzig, and S.R. Agnew: Acta Mater., 2007, vol. 55, pp. 2101–12.10.1016/j.actamat.2006.11.013 ↗
60. S.R. Agnew and O. Duygulu: Int. J. Plast., 2005, vol. 21, pp. 1161–93.10.1016/j.ijplas.2004.05.018 ↗
61. Y. Chino, H. Iwasaki, and M. Mabuchi: Mat. Sci. Eng. A, 2007, vol. 466, pp. 90–95.10.1016/j.msea.2007.02.027 ↗
62. S.B. Yi, J. Bohlen, F. Heinemann, and D. Letzig: Acta Mater., 2010, vol. 58, pp. 592–605.10.1016/j.actamat.2009.09.038 ↗
63. Y. Liu and X. Wu: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 7–17.10.1007/s11661-006-0147-2 ↗
64. J. Koike and R. Ohyama: Acta Mater., 2005, vol. 53, pp. 1963–72.10.1016/j.actamat.2005.01.008 ↗
65. T. Ebeling, Ch. Hartig, and R. Bormann: Magnesium Technology 2010: Proc. TMS, S.R. Agnew, N.R. Neeglameggham, E.A. Nyberg, and W. Sillekens, eds., Hoboken, 2010, pp. 521–25.
66. J. Koike, Y. Sato, and D. Ando: Mater. Trans., 2008, vol. 49, pp. 2792–2800.10.2320/matertrans.MRA2008283 ↗
67. J. Koike: Acta Mater., 2003, vol. 51, pp. 2055–65.10.1016/S1359-6454(03)00005-3 ↗
68. M.A. Meyers, O. Vöhringer, and V.A. Lubarda: Acta Mater., 2001, vol. 49, pp. 4025–39.10.1016/S1359-6454(01)00300-7 ↗
69. D.B. Lewis and F.B. Pickering: Met. Technol., 1983, vol. 10, pp. 264–73.10.1179/030716983803291811 ↗
70. H. Inoue and T. Takasugi: Mater. Trans., 2007, vol. 48, pp. 2014–22.10.2320/matertrans.L-MRA2007871 ↗
71. W.F. Hosford: The Mechanics of Crystals and Textured Polycrystals, Oxford University Press, New York, 1993.
72. X.S. Huang, K. Suzuki, Y. Chino, and M. Mabuchi: J. Alloys Compd., 2011, vol. 509, pp. 7579–84.10.1016/j.jallcom.2011.04.132 ↗
73. X.S. Huang, K. Suzuki, and N. Saito: Scripta Mater., 2009, vol. 60, pp. 651–54.10.1016/j.scriptamat.2008.12.035 ↗
74. Y. Chino, K. Sassa, and M. Mabuchi: J. Mater. Sci., 2009, vol. 44, pp. 1821–27.10.1007/s10853-009-3248-7 ↗
75. H. Zhang, G.S. Huang, D.Q. Kong, G.F. Sang, and B. Song: J. Mater. Process. Technol., 2011, vol. 211, pp. 1575–80.10.1016/j.jmatprotec.2011.04.009 ↗
76. Y. Chino and M. Mabuchi: Scripta Mater., 2009, vol. 60, pp. 447–50.10.1016/j.scriptamat.2008.11.029 ↗
77. X.S. Huang, K. Suzuki, A. Watazu, I. Shigematsu, and N. Saito: J. Alloys Compd., 2009, vol. 470, pp. 263–68.10.1016/j.jallcom.2008.02.029 ↗
78. W.F. Hosford and R.M. Caddel: Metal Forming: Mechanics and Metallurgy, 2nd ed., Prentice Hall, Upper Saddle River, NJ, 1993, pp. 298–301.
79. S. Gall, R.S. Coelho, S. Müller, and W. Reimers: Mater. Sci. Eng. A, 2013, vol. 579, pp. 180–87.10.1016/j.msea.2013.05.027 ↗
80. T. Wu, L. Jin, W.X. Wu, L. Gao, J. Wang, Z.Y. Zhang, and J. Dong: Mater. Sci. Eng. A, 2013, vol. 584, pp. 97–102.10.1016/j.msea.2013.07.011 ↗
81. F. Kaiser, D. Letzig, J. Bohlen, A. Styczynski, Ch. Hartig, and K.U. Kainer: Mater. Sci. Forum, 2003, vol. 419-422, pp. 315–20.10.4028/www.scientific.net/MSF.419-422.315 ↗
82. W.F. Hosford: Mater. Sci. Eng. A, 1998, vol. 257, pp. 1–8.10.1016/S0921-5093(98)00819-3 ↗
83. M.R. Barnett: Mater. Sci. Eng. A, 2007, vol. 464, pp. 8–16.10.1016/j.msea.2007.02.109 ↗
84. M. Marya, L.G. Hector, R. Verma, and W. Tong: Mater. Sci. Eng. A, 2006, vol. 418, pp. 341–56.10.1016/j.msea.2005.12.003 ↗
85. Z. Chen, J. Huang, R.F. Decker, S.E. Lebeau, L.R. Walker, O.B. Cavin, T.R. Watkins, and C.J. Boehlert: Metall. Mater. Trans. A, 2010, vol. 42A, pp. 1386–99.
86. Z.F. Li, J. Dong, X.Q. Zeng, C. Lu, and W.J. Ding: Mater. Sci. Eng. A, 2007, vol. 466, pp. 134–39.10.1016/j.msea.2007.02.029 ↗
87. A.N. Chamos, Sp.G. Pantelakis, G.N. Haidemenopoulos, and E. Kamoutsi: Fatigue Fract. Eng. Mater. Struct., 2008, vol. 31, pp. 812–21.10.1111/j.1460-2695.2008.01267.x ↗