Metastable β-type Ti-30Nb-1Mo-4Sn Alloy with Ultralow Young’s Modulus and High Strength
Source abstract
Abstract
The effect of thermo-mechanical treatment on the mechanical properties of a novel metastable β-type Ti-30Nb-1Mo-4Sn (wt pct) alloy has been investigated. The solution-treated alloy consists of β and α″ phases and exhibits a two-stage yielding with a low yield stress (around 100 MPa). After cold rolling at a reduction of 87.5 pct and subsequent annealing treat at 623 K (350 °C) for 30 minutes, a fine microstructure with nano-sized α precipitates distributed in small β grains as well as high density of dislocations was obtained to achieve a yield strength of 954 MPa and an ultimate tensile strength of 999 MPa. With low stability of β phase and small volume fraction of α precipitates, the annealed specimen exhibits a low Young’s modulus of 45 GPa. Such an excellent combination of the low elastic modulus and high strength in mechanical properties indicates a great potential candidate for biomedical applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. M. Geetha, A.K. Singh, R. Asokamani, and A.K. Gogia: Prog. Mater. Sci., 2008, vol. 54, pp. 397-425.10.1016/j.pmatsci.2008.06.004 ↗
2. M. Long, and H.J. Rack: Biomaterials, 1998, vol. 19, pp. 1621-39.10.1016/S0142-9612(97)00146-4 ↗
3. M. Tane, S. Akita, T. Nakano, K. Hagihara, Y. Umakoshi, and M. Niinomi: Acta. Mater., 2008, vol. 56, pp. 2856-63.10.1016/j.actamat.2008.02.017 ↗
4. T. Saito, T. Furuta, J. Hwang, S. Kuramoto, K. Nishino, N. Suzuki, R. Chen, A. Yamada, K. Ito, Y. Seno, T. Nonaka, H. Ikehata, N. Nagasako, C. Iwamoto, Y. Ikuhara, and T. Sakuma, Science, 2003, vol. 300, pp. 464–67.10.1126/science.1081957 ↗
5. H. Ikehata, N. Nagasako, T. Furuta, A. Fukumoto, K. Miwa, and T. Saito: Phys. Rev. B, 2004, vol. 70, pp. 174113-1—174113-8.10.1103/PhysRevB.70.174113 ↗
6. H.Y. Kim, H. Satoru, J.I. Kim, H. Hosoda, and S. Miyazaki: Mater. Trans. 2004, vol. 45-7, pp. 2443-48.10.2320/matertrans.45.2443 ↗
7. Y.L. Zhou, M. Niinomi, and T. Akahori: Mater. Sci. Eng. A, 2004, vol. 371, pp. 283-90.10.1016/j.msea.2003.12.011 ↗
8. L.A. Matlakhova, A.N. Matlakhova, S.N. Monteiro, S.G. Fedotov, and B.A. Goncharenko: Mater. Sci. Eng. A, 2005, vol. 393, pp. 320-26.10.1016/j.msea.2004.11.021 ↗
9. E.W. Collings: The Physical Metallurgy of Titanium Alloys, American Society for Metals, Metal Park, OH, 1984, p. 115.
10. T. Ozaki, H. Matsumoto, S. Watanabe and S. Hanada: Metall. Trans., 2004, vol. 45-8, pp. 2776-79.
11. A.H. Mohamed, K. Hinoshita, and M. Morinaga: Scripta. Mater., 2006, vol. 55, pp. 477-80.10.1016/j.scriptamat.2006.04.022 ↗
12. E.W. Collings: Applied Superconductivity, Metallurgy, and Physics of Titanium Alloys, vol. 1, 1st ed., Plenum Press, New York, 1986, p. 192.10.1007/978-1-4613-2095-1 ↗
13. E. Sukedai, H. Matsumoto, and H. Hashimoto: J. Electron Microsc., 2002, vol. 51, pp. 143-47.10.1093/jmicro/51.Supplement.S143 ↗
14. Y.L. Hao, M. Niinomi, D. Kuroda, K. Fukunaga, Y.L. Zhou, R. Yang, and A. Suzuki: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1007-12.10.1007/s11661-003-0230-x ↗
15. Y.L. Hao, M. Niinomi, D. Kuroda, K. Fukunaga, Y.L. Zhou, R. Yang, and A. Suzuki: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3138-44.
16. J. Hwang, S. Kuramoto, T. Furuta, K. Nishino, and T. Saito: J. Mater. Eng. Perform., 2005, vol.14-6, pp. 747-54.10.1361/105994905X75556 ↗
17. H. Matsumoto, S. Watanabe, and S. Hanada: Mater. Trans., 2005, vol.46-5, pp. 1070-78.10.2320/matertrans.46.1070 ↗
18. S. Nag, R. Banerjee, R. Srinivasan, J.Y. Hwang, M. Harper, and H.L. Fraser: Acta Mater., 2009, vol. 57, pp. 2136-47.10.1016/j.actamat.2009.01.007 ↗
19. Y.W. Chai, H.Y. Kim, H. Hosoda, and S. Miyazaki: Acta Mater., 2008, vol. 56, pp. 3088-97.10.1016/j.actamat.2008.02.045 ↗
20. T. Inamura, Y. Fukui, H. Hosoda, K. Wakashima, and S. Miyazaki: Mater. Sci. Eng. C, 2005, vol. 25, pp. 426-32.10.1016/j.msec.2005.01.025 ↗
21. S. Sarkar, X.B. Ren, and K. Otsuka: Phys. Rev. B, 2005, vol. 95, pp. 205702-05.
22. M. Niinomi: Mater. Sci. Eng. A, 1998, vol. 243, pp. 231-36.10.1016/S0921-5093(97)00806-X ↗
23. Y.L. Zhou, M. Niinomi, and T. Akahori: Mater. Sci. Eng. A, 2004, vol. 384, pp. 92–101.10.1016/j.msea.2004.05.084 ↗