Grain Growth in Dilute Tungsten Heavy Alloys during Liquid-Phase Sintering under Microgravity Conditions
Source abstract
Abstract
Tungsten heavy alloys with compositions ranging from 35 to 93 wt pct tungsten were liquid-phase sintered at 1500 °C under microgravity conditions for isothermal hold times ranging from 1 to 600 minutes. The solid-volume fraction, grain size, grain size distribution, connectivity, and contiguity of the sintered microstructures were quantitatively measured. From these data, grain-growth-rate constants are determined for solid-volume fractions ranging from 0.048 to 0.858 and are compared to the predictions of several grain-coarsening models. The measured grain size distributions are shown to be self-similar and are fit to a Weibull distribution. Three-dimensional (3-D) grain size distributions from several coarsening models are transformed into grain size distributions for two-dimensional (2-D) cross sections, for comparison with the experimental data. Chi-squared tests and G-tests show that a coalescence model for grain growth fits the experimental observations better than solution-reprecipitation models, even for dilute tungsten heavy alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · High Temperature Alloys and Creep · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. C.M. Kipphut, A. Bose, S. Farooq, R.M. German: Metall. Mater. Trans. A, 1988, vol. 19A, pp. 1905–1310.1007/BF02645192 ↗
2. C.M. Kipphut, R.M. German, A. Bose, and T. Kishi: Advances in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1989, vol. 2, pp. 415–29
3. J.L. Johnson, R.M. German: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 857–6610.1007/s11663-998-0145-4 ↗
4. S.C. Yang, R.M. German: Metall. Trans. A, 1991, vol. 22A, pp. 786–9110.1007/BF02670302 ↗
5. S.S. Mani and R.M. German: in Advances in Powder Metallurgy, L.F. Pease and R.J. Sansoucy, eds., Metal Powder Industries Federation, Princeton, NJ, 1991, vol. 4, pp. 195–212
6. S. Kohara and M. Hoshino: in Advances in Powder Metallurgy and Particulate Materials, Chaman Lall and Albery J. Neupaver, eds., Metal Powder Industries Federation, Princeton, NJ, 1994, vol. 3, pp. 295–302
7. Y. Liu, D.F. Heaney, R.M. German: Acta Metall. Mater., 1995, vol. 43, pp. 1587–9210.1016/0956-7151(94)00363-M ↗
8. R.M. German: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 279–8810.1007/BF02664666 ↗
9. P.W. Voorhees: Annu. Rev. Mater. Sci., 1992, vol. 22, pp. 197–21510.1146/annurev.ms.22.080192.001213 ↗
10. I.M. Lifshitz, V.V. Slyozov: J. Phys. Chem. Solids, 1961, vol. 19, pp. 35–5010.1016/0022-3697(61)90054-3 ↗
11. C. Wagner: Z. Elektrochem., 1961, vol. 65, pp. 581–91
12. R. Watanabe, Y. Masuda: in Sintering and Catalysis, G.C. Kuczynski, ed., Plenum Press, New York, NY, 1975, pp. 389–9810.1007/978-1-4684-0934-5_29 ↗
13. E.G. Zukas, P.S.Z. Rogers, R.S. Rogers: Z. Metallkd., 1976, vol. 67, pp. 591–95
14. T.H. Courtney: Metall. Trans. A, 1977, vol. 8A, pp. 685–8910.1007/BF02664777 ↗
15. A.N. Niemi, T.H. Courtney: J. Mater. Sci., 1981, vol. 16, pp. 226–3610.1007/BF00552076 ↗
16. G. Petzow, S. Takajo, W.A. Kaysser: in Practical Applications of Quantitative Metallography, J.L. McCall, J.H. Steele, eds., ASTM, Philadelphia, PA, 1984, pp. 29–4010.1520/STP30213S ↗
17. C.S. Jayanth, P. Nash: J. Mater. Sci., 1989, vol. 24, pp. 3041–5210.1007/BF01139016 ↗
18. S.C. Yang, P. Nash: Scripta Metall. Mater., 1990, vol. 24, pp. 263–6610.1016/0956-716X(90)90253-D ↗
19. R.M. German, E.A. Olevsky: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 3057–6710.1007/s11661-998-0213-z ↗
20. P. Lu, R.M. German: J. Mater. Sci., 2001, vol. 36, pp. 3385–9410.1023/A:1017943524875 ↗
21. D.F. Heaney, R.M. German: Advances in Powder Metallurgy and Particulate Materials Metal Powder Industries Federation, Princeton, NJ, 1994, pp. 303–11
22. C.H. Kang, D.N. Yoon: Metall. Trans. A, 1981, vol. 12A, pp. 65–6910.1007/BF02648509 ↗
23. S.S. Kang, D.N. Yoon: Metall. Trans. A, 1982, vol. 13A, pp. 1405–1110.1007/BF02642878 ↗
24. S.S. Kim, D.N. Yoon: Acta Metall., 1983, vol. 31, pp. 1151–5710.1016/0001-6160(83)90177-3 ↗
25. W. Bender, L. Ratke, and B. Feuerbacher: Proc. VIIIth Eur. Symp. on Materials and Fluid Sciences in Microgravity, European Space Agency, Paris, France, 1992, pp. 645–49
26. J.L. Johnson, J.J. Brezovsky, R.M. German: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1557–6510.1007/s11661-005-0247-4 ↗
27. J. Naser, J.J.E. Smith, A.K. Kuruvilla: J. Mater. Sci., 1998, vol. 33, pp. 5573–8010.1023/A:1004403912910 ↗
28. A. Upadhyaya, B. Ozkal, R.M. German: P/M Sci. Technol. Briefs, 1999, vol. 1 (2), pp. 17–21
29. L.G. Campbell, R.M. German: in Advances in Powder Metallurgy & Particulate Materials, J. Engquist, T.F. Murphy, eds., Metal Powder Industries Federation, Princeton, NJ, 2007, pp. 8.10–18.28
30. A.J. Ardell: Acta Metall., 1972, vol. 20, pp. 61–7110.1016/0001-6160(72)90114-9 ↗
31. C.K.L. Davies, P. Nash, R.N. Stevens: Acta Metall., 1980, vol. 28, pp. 179–8910.1016/0001-6160(80)90067-X ↗
32. A.D. Brailsford, P. Wynblatt: Acta Metall., 1979, vol. 27, pp. 489–9710.1016/0001-6160(79)90041-5 ↗
33. P.W. Voorhees, M.E. Glicksman: Metall. Trans. A, 1984, vol. 15A, pp. 1081–8810.1007/BF02644701 ↗
34. S.P. Marsh, M.E. Glicksman: Acta Metall., 1996, vol. 44, pp. 3761–71
35. Y. Enomoto, K. Kawasaki, M. Tokuyama: Acta Metall., 1987, vol. 35, pp. 907–1310.1016/0001-6160(87)90169-6 ↗
36. R.T. DeHoff: Acta Metall. Mater., 1991, vol. 39, pp. 2349–6010.1016/0956-7151(91)90016-T ↗
37. S. Takajo, W.A. Kaysser, G. Petzow: Acta Metall., 1984, vol. 32, pp. 107–1310.1016/0001-6160(84)90207-4 ↗
38. R.M. German: Sintering Theory and Practice, Wiley-Interscience, New York, NY, 1996, pp. 293–99
39. H. Fischmeister, A. Kannappan, H. Lai, E. Navara: Phys. Sintering, 1969, vol. 1, pp. G1–G13
40. T.-K. Kang, D.N. Yoon: Metall. Trans. A, 1978, vol. 9A, pp. 433–3810.1007/BF02646395 ↗
41. Y. Masuda, R. Watanabe: in Sintering Processes, G.C. Kuczynski, ed., Plenum Press, New York, NY, 1980, pp. 3–2110.1007/978-1-4899-5301-8_1 ↗
42. R.M. German, K.S. Churn: Metall. Trans. A, 1984, vol. 15A, pp. 747–5410.1007/BF02644206 ↗
43. B.H. Rabin, R.M. German: Metall. Trans. A, 1988, vol. 19A, pp. 1523–3210.1007/BF02674026 ↗
44. C. Zubillaga, F. Hernandez, J.J. Urcola, M. Fugntes: Acta Metall., 1989, vol. 37, pp. 1865–7210.1016/0001-6160(89)90071-0 ↗
45. S.C. Yang, S.S. Mani, R.M. German: JOM, 1990, vol. 42 (4), pp. 16–1910.1007/BF03220917 ↗
46. R.M. German, A. Bose, S.S. Mani: Metall. Trans. A, 1992, vol. 23A, pp. 211–1910.1007/BF02660866 ↗
47. R.M. German, Y. Liu, A. Griffo: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 215–2110.1007/s11661-997-0098-2 ↗
48. A.F. Guillermet, L. Ostlund: Metall. Trans. A, 1986, vol. 17A, pp. 1809–2310.1007/BF02817278 ↗
49. P. Villars, A. Prince, and H. Okamoto: Handbook of Ternary Phase Diagrams, ASM INTERNATIONAL, Metals Park, OH, 1995, vol. 8, p. 10673
50. Smithells Metals Reference Book, 8th ed., W.F. Gale and T.C. Totenmeier, eds., Elsevier and ASM INTERNATIONAL, New York, NY, 1983
51. J.P. Leonard, T.J. Renk, M.O. Thompson, M.J. Aziz: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2803–0710.1007/s11661-004-0227-0 ↗
52. J. Shen, L. Campbell, P. Suri, R.M. German: Int. J. Ref. Met. Hard Mater., 2005, vol. 23, pp. 99–10810.1016/j.ijrmhm.2004.10.004 ↗
53. E.E. Underwood: Quantitative Stereology, Addison-Wesley, Reading, MA, 1970
54. Y. Liu, R.M. German, R.G. Iacocca: Acta Mater., 1999, vol. 47 (3), pp. 915–2610.1016/S1359-6454(98)00395-4 ↗
55. J. Liu, Y. Liu, R.M. German: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 3187–9310.1007/s11661-000-0098-y ↗
56. J. Takahashi and H. Suito: Acta Mater., 2001, vol. 49, pp. 711–19, p. 235510.1016/S1359-6454(00)00350-5 ↗
57. J. Takahashi, H. Suito: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 171–8110.1007/s11661-003-0218-6 ↗
58. A. Tewari, A.M. Gokhale, R.M. German: Acta Mater., 1999, vol. 47, pp. 3721–2410.1016/S1359-6454(99)00164-0 ↗
59. R.M. Bethea, B.S. Duvan, and T.L. Boullion: Statistical Methods for Engineers and Scientists, Marcel Dekker, New York, NY, 1985
60. A.J. Izenman: J. Amer. Stat. Assoc., 1991, vol. 86 (413), pp. 205–2410.1080/01621459.1991.10475021 ↗
61. R.R. Sokal and F.J. Rohlf: The Principles and Practice of Statistics in Biological Research, 3rd ed., Freeman, New York, NY, 1994